1. Product Overview
The Bush Business Furniture Series C 48W x 30D Shell Desk is designed to enhance office functionality, offering a versatile workspace solution. This desk features thermally fused laminate construction for superior resistance to scratches and stains, ensuring long-lasting durability. It includes integrated wire management grommets to maintain an uncluttered desk area and adjustable levelers to compensate for uneven floor surfaces. The Series C collection is suitable for various office environments, from small home offices to large corporate settings, meeting ANSI/BIFMA standards for safety and performance.

Figure 1: The Bush Business Furniture Series C 48W x 30D Shell Desk in Hansen Cherry, showcasing its compact design suitable for various office setups.
2. Product Features
- Durable Construction: Thermally fused laminate work surfaces provide superior resistance to scratches and stains.
- Robust Design: All work surfaces and leg end panels are 1 inch thick for enhanced stability.
- Expandable: Designed to accept two 3/4 pedestals, or 2-Drawer or 3-Drawer Mobile Pedestals (sold separately).
- Integrated Wire Management: Features wire management grommets on all desk work surfaces, compatible with monitor arms.
- Accessory Ready: Accepts a Pencil Drawer or Keyboard Tray in the center position (sold separately).
- Safety Standards: Meets ANSI/BIFMA standards for safety and performance.
- Adjustable Levelers: Included to ensure stability on uneven floor surfaces.
3. Setup and Assembly
Assembly of the Series C Shell Desk is required. It is recommended that two people participate in the assembly process due to the weight and size of the components. All necessary assembly tools, including a hammer and screwdriver, are typically included with the product.
3.1 Pre-Assembly Checklist
- Verify all parts are present by comparing with the parts list in the packaging.
- Ensure you have adequate space for assembly.
- Gather recommended tools: Hammer, Screwdriver (often included).
3.2 Assembly Tips
- It is advisable to attach the four round foot levelers to the bottom of the desk panels at the earliest possible stage of assembly, rather than waiting until the entire desk is constructed. This can prevent the need to lift the heavy desk later.
- Follow the step-by-step instructions provided in the detailed manual included in your product packaging.
- Handle all components with care to avoid scratches or damage during assembly.

Figure 2: Dimensional diagram of the Series C Shell Desk, illustrating its length, width, and height for planning your workspace.
4. Operating Instructions
The Series C Shell Desk is designed for straightforward use in a professional or home office setting. Its primary function is to provide a stable and organized work surface.
4.1 Wire Management
Utilize the integrated wire management grommets located on the desk surface to route cables from your computer, monitors, and other peripherals. This helps to keep your workspace tidy and reduces cable clutter.

Figure 3: A close-up view of the wire management grommet, demonstrating how cables can be neatly routed through the desk surface.
4.2 Adjustable Levelers
If your desk wobbles or is uneven, adjust the levelers located at the bottom of the desk legs. Rotate them clockwise to raise a corner and counter-clockwise to lower it until the desk is stable and level.
5. Maintenance
To maintain the appearance and longevity of your Bush Business Furniture Series C Shell Desk, follow these simple care instructions:
- Cleaning: Wipe the desk surfaces with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the thermally fused laminate finish.
- Spills: Clean up spills immediately to prevent staining or damage to the surface.
- Protection: Use coasters for beverages and desk pads for writing or heavy objects to protect the surface from scratches and heat.
6. Troubleshooting
This section addresses common issues you might encounter with your desk.
6.1 Desk Wobbles
- Check Levelers: Ensure all adjustable levelers on the bottom of the desk legs are properly extended and making firm contact with the floor. Adjust as needed to stabilize the desk.
- Tighten Fasteners: Over time, fasteners may loosen. Carefully re-tighten all assembly screws and bolts. Do not overtighten.
6.2 Surface Scratches or Dents
- The thermally fused laminate is highly resistant to scratches, but not entirely impervious. For minor surface imperfections, specialized furniture repair kits for laminate surfaces may be used.
- For significant damage, contact customer support for advice.
7. Specifications
| Brand | Bush Furniture |
| Model Number | WC24448 |
| Product Dimensions (D x W x H) | 29.37"D x 47.68"W x 29.88"H |
| Item Weight | 97 Pounds |
| Color | Hansen Cherry (Top), Graphite Gray (Base) |
| Top Material Type | Engineered Wood (Thermally Fused Laminate) |
| Base Material | Engineered Wood |
| Tabletop Thickness | 1 Inch |
| Required Assembly | Yes |
| Recommended People for Assembly | 2 |
| Tools Recommended for Assembly | Hammer, Screwdriver (often included) |
| Product Grade | Commercial |
| Certifications | Meets ANSI/BIFMA standards |
8. Warranty and Support
The Bush Business Furniture Series C Shell Desk is backed by Bush Business Furniture's 10-Year Warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, replacement parts, or additional support, please refer to the contact information provided in your product packaging or visit the official Bush Business Furniture website. Please have your model number (WC24448) and purchase information ready when contacting support.
8.1 Official Product Video
Video: Bush Business Furniture Series C Overview. This video provides a general overview of the Series C collection, highlighting its design, quality construction, and various configurations available. It showcases different desk formats, storage options, and height-adjustable features within the Series C line.