1. Introduction
This manual provides instructions for the safe and effective use of your UpBright AC Charging Power Cord. This power cord is designed to provide AC power for charging compatible devices such as the EverStart MAXX 1200A J5CPDE Jump Starter and similar portable power stations.
Please read this manual thoroughly before use and retain it for future reference.
2. Safety Instructions
- Ensure the power cord is compatible with your device's power input specifications (voltage, current, and connector type) before connecting.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Avoid placing the cord in areas where it can be tripped over or damaged.
- Do not overload electrical outlets.
- Keep the power cord away from water, excessive heat, and direct sunlight.
- Always grasp the plug, not the cord, when disconnecting from an outlet or device.
3. Setup
The UpBright AC Charging Power Cord is a simple plug-and-play accessory. No complex setup is required.
- Identify the Power Input Port: Locate the AC power input port on your compatible device (e.g., EverStart MAXX 1200A Jump Starter). This port typically accepts a 2-prong AC connector.
- Connect the Cord to the Device: Insert the female end of the UpBright AC Charging Power Cord firmly into the AC input port of your device.
- Connect to Power Outlet: Insert the male end of the UpBright AC Charging Power Cord into a standard 120V AC wall outlet.
Image 1: The UpBright AC Charging Power Cord, showing both the male and female ends. This cord is used to connect compatible devices to a standard wall outlet for charging.
Image 2: An EverStart MAXX Jump Starter, illustrating the type of device this power cord is designed to charge. The image shows the jump starter from various angles, highlighting its features and the general form factor.
4. Operating Instructions
Once the power cord is securely connected to both your device and a power outlet, the device should begin charging. Refer to your device's specific user manual for details on its charging indicators and charging duration.
- Charging Indicator: Most compatible devices will have an indicator light or display to show charging status.
- Charging Time: Charging time varies depending on the device's battery capacity and current charge level.
- Disconnection: Once charging is complete, disconnect the power cord by first unplugging it from the wall outlet, then from the device.
Image 3: A close-up view of the 2-prong AC power cord, emphasizing the male plug and the female connector. This image also shows a typical 2-slot AC outlet, indicating where the cord connects to the power source.
5. Maintenance
- Cleaning: Wipe the cord with a dry, soft cloth if it becomes dirty. Do not use liquid cleaners.
- Storage: Store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cord sharply to prevent internal wire damage.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or discoloration. Discontinue use immediately if damage is found.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. |
|
|
| Cord feels warm during use. |
|
|
7. Specifications
- Product Type: AC Charging Power Cord
- Connector Type: 2-Prong AC (Male-to-Female)
- Input Voltage: 120V AC, 60Hz
- Compatibility: EverStart MAXX 1200A J5CPDE Jump Starter, Ever Start 1200 Amp Battery Jump Starter, and other compatible portable power stations requiring a 2-prong AC input.
- Dimensions: Approximately 5 x 2 x 1 inches (packaged)
- Weight: Approximately 0.01 ounces
8. Warranty Information
For warranty details, please refer to the packaging or contact UpBright customer support directly. Keep your purchase receipt as proof of purchase.
9. Customer Support
If you have any questions or require assistance, please contact UpBright customer support through their official website or the retailer where the product was purchased.
Manufacturer: UpBright