GPX C224B

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

User Manual

GPX C224B Dual Alarm Clock AM/FM Radio with Red LED Display (Black)

Model: C224B | Brand: GPX

Product Overview

The GPX C224B is a versatile dual alarm clock radio designed for convenience and reliability. It features a clear red LED display, AM/FM radio with station presets, and dual alarm functions allowing you to wake to either the radio or a buzzer. Its compact design makes it suitable for any bedside table or desk.

Front view of the GPX C224B Dual Alarm Clock Radio with red LED display showing 12:35.

Front view of the GPX C224B Dual Alarm Clock Radio, highlighting its clear red LED display and compact form factor.

Setup

Power Connection

Connect the included AC power adapter to the DC input jack on the back of the unit and then plug the adapter into a standard wall outlet. The clock display will light up.

Battery Backup Installation

For battery backup, install two AAA batteries (not included) into the battery compartment located on the bottom of the unit. This feature ensures that time and alarm settings are maintained during a power outage, though the display will not be lit.

Angled view of the GPX C224B Dual Alarm Clock Radio showing the top controls and front display.

Angled view of the GPX C224B, showing the top control buttons and the red LED display.

Operating Instructions

Setting the Time

  1. Press and hold the CLOCK button until the display flashes.
  2. Use the HOUR and MINUTE buttons to adjust the time.
  3. Press CLOCK again to confirm and exit time setting mode.

Setting Alarms (Dual Alarm Feature)

The unit features two independent alarms (Alarm 1 and Alarm 2).

GPX C224B Dual Alarm Clock Radio with a graphic indicating 'Dual Alarm'.

The GPX C224B supports dual alarms, perfect for different wake-up times or for two users.

  1. Press and hold the AL1 or AL2 button until the display flashes.
  2. Use the HOUR and MINUTE buttons to set the desired alarm time.
  3. Press AL1 or AL2 again to select the alarm source (Buzzer or Radio). The corresponding indicator will light up.
  4. Press AL1 or AL2 one more time to confirm and exit.

AM/FM Radio Operation

GPX C224B Dual Alarm Clock Radio with a graphic indicating 'AM/FM Radio'.

The clock radio features both AM and FM radio bands for diverse listening options.

  • Press the AM/FM button to turn on the radio. Press again to switch between AM and FM bands.
  • Use the TUNING +/- buttons to manually tune to a station. Press and hold to auto-scan for the next available station.
  • To save a preset: Tune to the desired station, then press and hold the PRESET button until the preset number flashes. Use PRESET again to select the preset number (P01-P10 for each band), then press CLOCK to save.
  • To recall a preset: Briefly press the PRESET button to cycle through saved stations.

Volume Control

While the radio is on, use the VOLUME +/- buttons to adjust the listening volume.

Snooze Function

When an alarm sounds, press the large SNOOZE/SLEEP button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.

Display Dimmer

To adjust the brightness of the LED display, press the DIMMER button (if available, or typically integrated with other buttons like SNOOZE/SLEEP by multiple presses) to cycle through brightness levels.

Maintenance

  • Clean the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Keep the unit away from direct sunlight, heat sources, and excessive dust or moisture.
  • If the unit will not be used for a long period, remove the backup batteries to prevent leakage.

Troubleshooting

ProblemSolution
Unit does not power on.Ensure the AC adapter is securely plugged into both the unit and a working wall outlet. Check if the outlet has power.
Alarm does not sound.Verify that the alarm time is set correctly and the alarm is activated (indicator light on). Check the volume level if waking to radio.
Poor radio reception.Extend the FM wire antenna fully. For AM, try repositioning the unit to improve reception. Avoid placing near other electronic devices that may cause interference.
Time/settings lost after power outage.Ensure fresh AAA batteries are installed correctly in the battery backup compartment.

Specifications

  • Model: C224B
  • Display: 0.6" Red LED Display
  • Radio: Digital AM/FM (PLL)
  • Presets: 20 total (10 AM / 10 FM)
  • Alarms: Dual Alarm (Wake to Radio or Buzzer)
  • Power Source: AC Power Adapter (included)
  • Battery Backup: 2 x AAA batteries (not included)
  • Dimensions: 5.12"W x 2.01"H (approximate)
  • Weight: 5.9 ounces (approximate)

Warranty and Support

This product comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for detailed information regarding warranty coverage and terms. For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official GPX website or contact their customer service department. Contact information can typically be found in the included user's guide or on the GPX brand website.

You can also find additional support and product information by visiting the GPX Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.