Bravo 93003100

Download PDF
Contents

BRAVO Digital Weekly Programmable Thermostat Model 93003100 User Manual

Your guide to installation, operation, and maintenance.

1. Introduction

The BRAVO Digital Weekly Programmable Thermostat (Model 93003100) is designed to provide precise and efficient temperature control for your heating system. Featuring a large 3.8-inch backlit LCD display, it offers both daily and weekly programming options, as well as temporary and permanent manual control. This thermostat also includes an anti-freeze function to protect your home.

BRAVO Digital Weekly Programmable Thermostat front view

Figure 1: Front view of the BRAVO Digital Weekly Programmable Thermostat, showing the large LCD screen and control buttons on the left and right sides.

Key Features:

  • Large 3.8-inch backlit LCD display (backlight duration adjustable: 0, 5, 15 seconds).
  • Automatic daily and weekly programming.
  • Temporary and permanent manual programming modes.
  • Anti-freeze function.
  • Battery-powered (2x AA batteries, not included).
  • Compact dimensions: 11.5 x 9 x 2.8 cm.

2. Installation

This thermostat is designed for wall mounting and requires two AA batteries (not included) for operation. Ensure the power to your heating system is turned off at the main circuit breaker before proceeding with installation.

2.1 Package Contents

  • BRAVO Digital Weekly Programmable Thermostat unit.
  • Instruction Manual.

2.2 Tools Required

  • Medium Phillips head screwdriver.
  • Small Phillips head screwdriver.
  • Small flathead screwdriver.
  • Drill (if new mounting holes are required).
  • Wall plugs and screws (if new mounting holes are required).

2.3 Mounting the Thermostat

  1. Separate the Mounting Plate: Gently detach the rear mounting plate from the main thermostat unit. The direction is often indicated by arrows.
  2. Access Wiring Terminals: Locate the protective cover in the center of the mounting plate. Use a small Phillips head screwdriver to remove this cover, revealing the wiring terminals.
  3. Connect Wiring: Connect the two wires from your heating system (e.g., boiler) to the terminals labeled 'COM' and 'NO' (Normally Open) on the lower right side. Use a small flathead screwdriver to secure the wires. Ensure connections are firm.
  4. Mount to Wall: Secure the mounting plate to the wall using appropriate screws and wall plugs. If replacing an existing thermostat, the existing screw holes may align.
  5. Install Batteries: Insert two AA batteries into the battery compartment of the main thermostat unit. Ensure correct polarity.
  6. Attach Thermostat Unit: Carefully clip the main thermostat unit onto the mounted backplate. It should securely snap into place.
Side view of BRAVO Digital Weekly Programmable Thermostat showing mounting tabs

Figure 2: Side view of the thermostat, illustrating the slim profile and mounting points for wall installation.

After installation, restore power to your heating system. The thermostat display should illuminate.

3. Operation

The BRAVO thermostat offers various modes of operation to suit your needs.

3.1 Initial Setup (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day. Refer to the on-screen prompts or the dedicated 'SET CLOCK' function (often accessed via a button or menu option) to adjust these settings.

3.2 Programming Modes

The thermostat supports automatic programming for daily and weekly schedules, as well as manual overrides.

  • Automatic Programming: Set specific temperatures for different time periods throughout the day, for each day of the week. This allows for energy savings by adjusting heating based on your schedule (e.g., lower temperature when away, higher when home). The system typically allows for 4 or 6 daily time phases (e.g., wake, leave, return, sleep).
  • Temporary Manual Override: Adjust the temperature manually. The thermostat will maintain this new temperature until the next programmed time phase begins.
  • Permanent Manual Override: Set a desired temperature that the thermostat will maintain continuously, overriding all programmed schedules until manually changed or switched back to automatic mode.

3.3 Anti-Freeze Function

The anti-freeze function prevents the temperature from dropping below a set minimum (e.g., 5°C) to protect pipes from freezing. This function is typically active when the thermostat is in an 'OFF' or low-temperature setting.

3.4 Backlight Control

The display backlight duration can be adjusted (0, 5, or 15 seconds) via the settings menu to conserve battery life or improve visibility.

4. Maintenance

The BRAVO thermostat requires minimal maintenance.

4.1 Battery Replacement

When the battery indicator appears on the display, replace the two AA batteries. To do this, carefully detach the main thermostat unit from its wall-mounted backplate, replace the batteries, and reattach the unit. Ensure correct polarity.

4.2 Cleaning

Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the display or casing.

5. Troubleshooting

  • Display is blank: Check if batteries are correctly installed and not depleted. Replace batteries if necessary.
  • Heating system not responding:
    • Ensure the thermostat is set to a temperature higher than the current room temperature.
    • Verify that the heating system's power supply is on.
    • Check wiring connections at the thermostat and heating system.
  • Inaccurate temperature reading: The thermostat may have a slight deviation from actual room temperature. This can often be calibrated through the advanced settings menu. Consult the specific menu options for temperature calibration.
  • Difficulty with programming: Review the programming section of this manual carefully. The thermostat uses time phases rather than hour-by-hour programming.

6. Specifications

BRAVO Digital Weekly Programmable Thermostat with dimensions labeled

Figure 3: Dimensions of the BRAVO Digital Weekly Programmable Thermostat: 11.5 cm width, 9 cm height, 2.8 cm depth.

FeatureSpecification
Model Number93003100
Display TypeLCD, 3.8-inch, backlit
Power Source2x AA Batteries (not included)
Voltage24 Volt (control circuit)
Dimensions (L x W x H)11.5 x 9 x 2.8 cm
Weight9.07 grams
Mounting TypeWall Mount
Special FeaturesAutomatic Programming, Anti-freeze Function
ColorWhite

7. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact BRAVO customer service. Keep your proof of purchase for warranty claims.

Manufacturer: BRAVO

Model Number: 93003100

First Available: March 15, 2014

© 2023 BRAVO. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.