1. Introduction and Overview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Harmony E24506-91PC LED Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The ET2 Harmony pendant light features multiple bubble glass balls, each illuminated by an integrated LED. The individual pendants are suspended by adjustable cables, allowing for customization of the fixture's overall design and drop height. The fixture is designed for indoor use and is fully dimmable.
Image 1.1: The ET2 Harmony E24506-91PC LED Pendant Light, showcasing its design with multiple bubble glass spheres.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any components. Consult a qualified electrician if you are unsure about the installation process.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only UL Listed wire connectors.
- Do not exceed the specified voltage (120 Volts).
- Do not modify the fixture in any way.
- Keep combustible materials away from the light fixture.
- Wear safety glasses and gloves during installation.
3. Package Contents
Carefully unpack the fixture and check that all components are present and undamaged. Retain all packaging materials until installation is complete.
- Pendant Light Fixture (Canopy with integrated LED pendants)
- Mounting Hardware (Mounting plate, screws, wire nuts)
- Instruction Manual (This document)
4. Setup and Installation
Installation should be performed by a qualified electrician or a person with experience in electrical wiring.
4.1 Tools Required (Not Included)
- Phillips head screwdriver
- Flathead screwdriver
- Wire strippers
- Electrical tape
- Ladder
4.2 Installation Steps
- Turn Off Power: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Surface: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 11.07 pounds).
- Attach Mounting Plate: Secure the fixture's mounting plate to the junction box using the provided screws.
- Make Electrical Connections:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Ensure all connections are secure and insulated with electrical tape if necessary.
- Secure Fixture Canopy: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws.
- Adjust Pendant Lengths: The individual pendant cables are adjustable. To adjust, gently push the cable into the canopy's cable grip and pull to the desired length. Ensure all pendants are securely set before proceeding.
- Install Glass Balls: The bubble glass balls are pre-installed with LED bulbs. Ensure they are securely attached to their respective pendant cables.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image 4.1: Dimensional drawing of the ET2 Harmony E24506-91PC, indicating a 12.75-inch width and a maximum overall height of 126 inches.
Image 4.2: Detail of the fixture's polished chrome canopy and the attachment points for the adjustable pendant cables.
5. Operating Instructions
The ET2 Harmony E24506-91PC LED Pendant Light is designed for simple operation.
- Power On/Off: Control the light using a standard wall switch connected to the fixture's circuit.
- Dimming Function: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult your electrician for dimmer compatibility.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light.
- Cleaning: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the polished chrome finish and glass spheres. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Replacement: The integrated LED bulbs are designed for long life. If replacement is ever needed, contact ET2 customer support for guidance on obtaining compatible replacement parts. Do not attempt to replace LEDs with standard bulbs.
7. Troubleshooting
If you experience issues with your pendant light, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty wall switch | Check circuit breaker/fuse. Ensure power is on. Verify all wire connections are secure (with power off). Test wall switch or replace if necessary. |
| Light flickers or dims improperly | Incompatible dimmer switch Loose wiring connection | Ensure an LED-compatible dimmer switch is used. Check all wire connections (with power off). |
| Pendants are not level | Cable lengths are uneven | Adjust individual pendant cable lengths as described in Section 4.2. |
If the problem persists after attempting these solutions, contact ET2 customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ET2 |
| Model Number | E24506-91PC |
| Dimensions (L x W x H) | 12.75" x 12.75" x 3.75" (Canopy) Max Overall Height: 126" |
| Item Weight | 11.07 pounds |
| Material | Glass, Steel |
| Finish Type | Polished Chrome / Bubble Glass |
| Light Source Type | LED |
| Number of Light Sources | 9 |
| Wattage | 13.5W (Total) |
| Voltage | 120 Volts |
| Brightness | 945 Lumens |
| Light Color | Warm White (3000K) |
| Color Rendering Index (CRI) | 80+ |
| Installation Type | Semi Flush Mount / Ceiling Mount |
| Special Feature | Dimmable, Adjustable Cables |
| Indoor/Outdoor Usage | Indoor |
| Certification | UL Listed |
| Assembly Required | Yes |
9. Warranty and Support
9.1 Warranty Information
This ET2 Harmony E24506-91PC LED Pendant Light is covered by a 1-year manufacturer's limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
9.2 Customer Support
For technical assistance, warranty claims, or to order replacement parts, please contact ET2 customer support. Have your model number (E24506-91PC) and proof of purchase ready when contacting support.
You can find contact information for ET2 by visiting their official website or the retailer where the product was purchased.