Rok SCD103
Rok Hardware SCD103 Soft Close Damper for Cabinet Doors Instruction Manual
Model: SCD103 | Brand: Rok Hardware
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Rok Hardware SCD103 Soft Close Damper. Designed to prevent cabinet doors from slamming, this damper ensures a quiet and gentle closure, enhancing the longevity of your cabinetry.
Image: The Rok Hardware SCD103 Soft Close Damper shown with its single mounting screw.
Key Features
- Functionality: Works with face frame cabinets on all door overlays and frameless cabinets on full overlay doors.
- Adjustable Closing Speed: Features a sleek and compact design that allows for easy adjustment to achieve the desired closing speed.
- Protection: Includes a scratch protector and a front bumper with a cushion for noiseless and gentle closure.
- Easy Installation: Designed for simple mounting with a single screw per damper.
- Versatile: Non-handed design allows installation on either the left or right side of the cabinet.
- Durable Material: Constructed from high-grade plastic with a polished nickel finish.
Compatibility
The Rok Hardware SCD103 Soft Close Damper is designed for specific cabinet hinge types. Ensure your cabinet doors meet the following criteria for proper function:
- Works exclusively with cabinets featuring fully concealed self-closing hinges.
- Compatible with European and compact style hinges where the entire hinge is hidden when the door is closed.
Image: Visual guide for hinge compatibility. The damper works with hinges that are fully concealed when the door is closed (marked YES) and not with exposed hinges (marked NO).
Image: Examples of compatible European and compact style hinges (marked with green checkmarks) and an incompatible exposed hinge (marked with a red X).
Setup and Installation
Follow these steps to properly install your soft close damper:
- Identify Mounting Location: The damper should be mounted in the corner of the cabinet on the hinge side. It is non-handed, meaning it can be installed on either the left or right side.
- Prepare Pilot Hole: To prevent damage to your cabinet, pilot drill a 2.3 mm (3/32") hole, 1/4" deep only, for a #6 x 3/4" pan head screw. The diagram below illustrates the recommended 65-degree angle for the pilot hole, which can be guided by the damper itself.
- Secure the Damper: Position the damper firmly in the corner, ensuring the flat metal plate hangs over the edge of the cabinet door for secure placement. Use the provided mounting screw to attach the damper. Only one screw is needed per damper.
- Cabinet Type Considerations: The damper works for face frame cabinets on all door overlays and frameless cabinets on full overlay doors.
Image: Step-by-step installation showing the damper being screwed into the cabinet frame. Illustrations of face frame and frameless cabinet types are also included.
Image: Diagram illustrating the universal application of the damper and the recommended 65-degree angle for drilling the pilot hole.
Image: Detailed diagrams for mounting, showing dimensions, and illustrating the number of dampers per door and adjustment mechanism.
Operating and Adjustment
The soft close damper operates by slowing down the cabinet door's closing motion, preventing abrupt impacts. The closing speed can be adjusted to suit different door weights and preferences.
- How it Works: The plunger at the end of the damper extends to meet the cabinet door as it closes, providing resistance that slows its movement.
- Adjusting Closing Strength: Turn the adjustment screw located at the rear of the damper. Turning the screw in increases the damper's extension, making it suitable for heavier doors. Turning the screw out reduces the extension, ideal for lighter doors. This adjustment fine-tunes the soft-closing speed.
Image: The damper highlighting the adjustment screw for fine-tuning the soft-closing strength.
Image: A detailed view of the adjustment screw, indicating how to turn it for heavier or lighter doors.
Maintenance
To ensure optimal performance and longevity of your Rok Hardware SCD103 Soft Close Dampers, consider the following maintenance tips:
- Regular Cleaning: Wipe the dampers periodically with a soft, dry cloth to remove dust and debris. Avoid abrasive cleaners.
- Check Fasteners: Occasionally inspect the mounting screw to ensure it remains tight. A loose screw can affect performance and potentially lead to damage.
- Inspect Plunger: Ensure the damper's plunger moves freely without obstruction.
Troubleshooting
If you encounter issues with your soft close dampers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Door still slams or closes too quickly. | Damper not adjusted correctly for door weight; insufficient number of dampers. | Adjust the rear screw to increase damper extension (turn in). For heavier doors, consider installing a second damper (trial mount recommended). |
| Door bounces off the damper. | Door closed with excessive force; damper not fully extended or adjusted. | Ensure the damper is properly adjusted for the door's weight. Avoid slamming doors forcefully. |
| Damper does not engage or seems ineffective. | Incorrect hinge type; improper installation (loose screw, wrong angle). | Verify that your cabinet uses fully concealed self-closing hinges. Check that the mounting screw is tight and the damper is installed at the correct angle (65 degrees). |
| Damper breaks or fails prematurely. | Improper installation (out of place, loose screw); exceeding product lifespan. | Ensure correct and secure installation. If the damper has been in use for several years, it may have reached the end of its operational lifespan and require replacement. |
Specifications
- Brand: Rok
- Model Number: SCD103
- Material: Plastic
- Finish Type: Polished Nickel
- Product Dimensions: 2.38"L x 1.19"W
- Mounting Type: Door Mount, Face
- Hole Count: 2 (for mounting plate, though only 1 screw is typically used for installation)
- Unit Count: 10 Count (as per product variant)
- Color: Silver
- Item Weight: 5.6 ounces (for the pack)
- Installation Method: Screw-In
- Style: Soft-Closing
- UPC: 862255000040
Image: Technical drawing with detailed dimensions of the soft close damper.
Warranty and Support
Specific warranty information for the Rok Hardware SCD103 Soft Close Damper is not provided in this manual. For warranty details, technical support, or further assistance, please refer to the product packaging or contact Rok Hardware directly through their official website or customer service channels.
Related documentsSCD103
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.