Severin Smoothie Mix & Go Blender SM 3735

1. Introduction

Thank you for choosing the Severin Smoothie Mix & Go Blender SM 3735. This appliance is designed for preparing fresh smoothies, shakes, and sauces quickly and conveniently. Its compact design and included portable drinking containers make it ideal for use at home, in the office, or on the go. Please read this manual carefully before first use to ensure safe operation and optimal performance.

This manual provides important information on safety, setup, operation, maintenance, and troubleshooting. Keep it in a safe place for future reference.

2. Important Safety Instructions

WARNING: Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

• Read all instructions before operating the appliance.
• Do not immerse the motor unit in water or other liquids. Clean only with a damp cloth.
• Always unplug the appliance from the power outlet before cleaning, assembling, or disassembling parts.
• Avoid contact with moving parts. Blades are sharp. Handle with extreme care.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not use attachments not recommended or sold by the manufacturer.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Ensure the appliance is placed on a stable, flat surface during operation.
• Do not process hot liquids. Allow hot ingredients to cool before blending.
• Do not operate the blender continuously for more than 1 minute to prevent overheating. Allow a cooling period between cycles.

3. Product Overview and Components

The Severin Smoothie Mix & Go Blender SM 3735 consists of the following main components:

1. Motor Unit (Base)
2. Blade Attachment
3. 600 ml Drinking Bottles (x2)
4. Drinking Lids (x2)

4. Setup and Initial Use

Before using your blender for the first time, please follow these steps:

1. Unpack: Carefully remove all components from the packaging.
2. Clean: Wash the drinking bottles, lids, and blade attachment in warm, soapy water. Rinse thoroughly and dry. The bottles and lids are dishwasher safe. The blade attachment should be cleaned carefully due to sharp blades. The motor unit should only be wiped with a damp cloth.
3. Assemble:
   • Place the motor unit on a stable, flat, and dry surface.
   • Fill one of the drinking bottles with your desired ingredients. Do not exceed the MAX fill line.
   • Screw the blade attachment firmly onto the open end of the filled drinking bottle. Ensure it is securely tightened to prevent leaks.

5. Operating the Blender

Once the bottle with ingredients and blade attachment is securely placed on the motor unit:

1. Connect Power: Plug the power cord into a suitable electrical outlet (230V).
2. Start Blending: Press and hold the power button or rotate the bottle to engage the blending mechanism. The blender operates with one speed level and an additional pulse function.
3. Blend Time: Blend until your desired consistency is achieved. For optimal results and to prevent motor overheating, do not operate the blender continuously for more than 1 minute. If more blending is needed, allow the motor to rest for a few minutes before continuing.
4. Stop Blending: Release the power button or rotate the bottle counter-clockwise to disengage. Unplug the appliance from the power outlet.
5. Remove Bottle: Carefully lift the bottle from the motor unit.
6. Prepare for Drinking: Unscrew the blade attachment from the bottle. Screw on one of the drinking lids.

6. Maintenance and Cleaning

Regular cleaning ensures the longevity and hygienic operation of your blender.

1. Always unplug the appliance before cleaning.
2. Drinking Bottles and Lids: These are dishwasher safe. Alternatively, wash them by hand with warm, soapy water and a soft brush. Rinse thoroughly and dry.
3. Blade Attachment: Unscrew the blade attachment from the bottle. Rinse the blades carefully under running water immediately after use to prevent food from drying on them. Use a brush to clean around the blades if necessary. Exercise extreme caution as blades are very sharp. Do not immerse the entire blade attachment in water if it contains electrical components (though for this model, it's typically just the blade assembly).
4. Motor Unit: Wipe the motor unit with a damp cloth. Do not immerse it in water or any other liquid. Do not use abrasive cleaners or scouring pads.
5. Storage: Ensure all parts are completely dry before storing. Store the blender in a dry place.

7. Troubleshooting

If you encounter issues with your Severin Smoothie Mix & Go Blender, refer to the following table for common problems and solutions:

8. Technical Specifications

9. Warranty and Customer Support

Severin products are manufactured to high-quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage.

For technical assistance, spare parts, or warranty claims, please contact Severin customer support. You can find contact information on the official Severin website or on your product packaging.

Online Resources: For additional recipes and product information, you may visit the official Severin website or scan any QR codes provided with your product.

10. Product Videos

No official product videos are available for embedding at this time based on the provided data.