Everbilt Universal Lid Support Hinge Model 15543 Instruction Manual

1. Product Overview

The Everbilt Universal Lid Support Hinge is designed to provide reliable support for lids on various items such as craft boxes, small boxes, cabinets, and chests. This hinge allows the lid to open up to 65 degrees and features a durable steel construction with an antique bronze finish, ensuring both functionality and aesthetic appeal.

It offers universal mounting options, allowing installation on the left, center, or right side of the application.

2. Safety Information

• Always wear appropriate personal protective equipment, such as safety glasses, when installing hardware.
• Ensure the mounting surface is stable and capable of supporting the hinge and the lid's weight.
• Keep small parts, such as screws, out of reach of children to prevent choking hazards.
• Do not overtighten screws, as this may strip the wood or damage the hinge.
• If using power tools, follow the manufacturer's safety guidelines for their operation.

3. Package Contents

Verify that all components are present before beginning installation:

• 1 x Everbilt Universal Lid Support Hinge (Antique Bronze)
• Mounting Screws (quantity may vary, typically included for installation)

4. Setup and Installation

Follow these steps to properly install your Everbilt Universal Lid Support Hinge:

Tools Required:

• Pencil
• Drill with appropriate drill bit for pilot holes
• Screwdriver (manual or power)
• Measuring tape or ruler

Installation Steps:

1. Determine Mounting Position: The hinge can be mounted on the left, center, or right side of the lid and cabinet/box. Choose the position that best suits your application and provides optimal support.
2. Position the Hinge: Place the hinge in the desired mounting location. Ensure the hinge mechanism is oriented correctly to allow the lid to open to the desired angle (up to 65 degrees). The longer arm typically attaches to the lid, and the shorter arm to the side of the cabinet/box.
3. Mark Pilot Holes: Using a pencil, mark the locations for the screw holes through the hinge's mounting plates.
4. Drill Pilot Holes: Carefully drill pilot holes at the marked locations. The pilot holes should be slightly smaller than the screw diameter to prevent wood splitting, but large enough to allow the screws to enter smoothly.
5. Attach the Hinge: Align the hinge with the pilot holes. Insert the provided mounting screws and tighten them securely with a screwdriver. Do not overtighten.
6. Test Operation: Slowly open and close the lid to ensure the hinge operates smoothly and supports the lid at the desired open angle. Adjust screw tightness if necessary.

An image showing the Everbilt Universal Lid Support Hinge in Antique Bronze. The hinge is designed to support lids and features a durable steel construction with an antique brass finish.

5. Operation

Once installed, the Everbilt Universal Lid Support Hinge functions automatically. When the lid is opened, the hinge mechanism will engage to hold the lid in an open position, up to a maximum angle of 65 degrees. To close the lid, simply apply gentle downward pressure. The hinge is designed for smooth and controlled movement.

6. Maintenance

The Everbilt Universal Lid Support Hinge requires minimal maintenance:

• Cleaning: Wipe the hinge periodically with a soft, dry cloth to remove dust and dirt. Avoid abrasive cleaners or harsh chemicals, as these may damage the antique bronze finish.
• Lubrication: If the hinge action becomes stiff over time, a small amount of silicone-based lubricant can be applied to the pivot points.
• Inspection: Periodically check all mounting screws to ensure they remain tight. Retighten if any looseness is detected.

7. Troubleshooting

• Lid does not stay open: Ensure the hinge is installed correctly and the mounting screws are tight. Verify that the hinge is not obstructed by other components.
• Hinge feels loose: Check and tighten all mounting screws. If the screw holes are stripped, consider using slightly larger screws or wood filler to secure the existing screws.
• Lid movement is stiff or noisy: Apply a small amount of silicone lubricant to the hinge's pivot points. Ensure no debris is caught within the hinge mechanism.

8. Specifications

9. Warranty and Support

For specific warranty information or technical support regarding your Everbilt Universal Lid Support Hinge, please refer to the product packaging or contact Everbilt customer service directly. Keep your purchase receipt for warranty claims.