Selve SP 2/40 Tubular Motor for Awnings User Manual

1. Introduction

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your Selve SP 2/40 Tubular Motor for Awnings. Please read this manual thoroughly before beginning any work with the motor. Keep this manual for future reference.

The Selve SP 2/40 is a robust tubular motor designed for automating awnings, featuring a durable metal gear system for reliable performance. It simplifies the raising and lowering of your awning with convenient push-button control, eliminating the need for manual cranking.

Figure 1.1: Selve SP 2/40 Tubular Motor. This image shows the overall view of the tubular motor, a cylindrical device typically installed inside an awning's roller tube.

2. Safety Instructions

• Installation and electrical connections must be performed by qualified personnel in accordance with local regulations.
• Disconnect power before performing any maintenance or repair work.
• Ensure the awning system is free from obstructions before operation.
• Do not allow children to play with the motor or controls.
• Protect the motor from moisture and extreme temperatures.
• Regularly inspect the motor and awning for signs of wear or damage.

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your Selve SP 2/40 motor. Refer to the specific awning manufacturer's instructions for detailed mounting procedures.

3.1 Components Overview

Figure 3.1: Selve SP 2/40 Motor Side View. This image provides a side profile of the tubular motor, highlighting its elongated cylindrical shape and the end caps.

Figure 3.2: Selve SP 2/40 Motor End Cap. A close-up view of one end of the motor, showing the connection points and the mechanism for attaching to the awning's roller tube.

3.2 Mechanical Installation

1. Ensure the awning roller tube is clean and free of debris.
2. Insert the motor into the roller tube, ensuring it is securely seated and aligned with the tube's internal profile.
3. Attach the motor's drive adapter and crown to the roller tube according to the awning manufacturer's instructions.
4. Mount the motor's support bracket securely to the awning frame.
5. Ensure the motor is level and properly supported to prevent undue stress.

3.3 Electrical Connection

WARNING: Electrical work should only be performed by a licensed electrician.

• Identify the power supply wires (Live, Neutral, Earth) and the motor control wires (Up, Down, Common).
• Connect the motor to a suitable power supply (e.g., 230V AC, 50Hz) via a dedicated circuit breaker.
• Ensure all connections are secure and insulated.
• Verify correct wiring for Up/Down movement to prevent damage to the awning or motor.

3.4 Limit Switch Adjustment

The motor features adjustable limit switches to define the upper and lower stopping points of the awning. Refer to the specific instructions provided with your motor or control unit for precise adjustment procedures. This typically involves using an adjustment tool to set the desired end positions.

4. Operation

The Selve SP 2/40 motor is designed for simple operation via a wall switch or remote control (not included, sold separately). Ensure the motor is properly installed and the limit switches are set before first use.

4.1 Basic Control

• To Extend the Awning: Press and hold the "DOWN" button on your control unit. Release the button when the awning reaches the desired position or automatically stops at the lower limit.
• To Retract the Awning: Press and hold the "UP" button on your control unit. Release the button when the awning reaches the desired position or automatically stops at the upper limit.
• To Stop Movement: Press the opposite direction button or a dedicated "STOP" button (if available on your control unit) during operation.

4.2 Important Operating Notes

• Do not operate the awning in strong winds or heavy rain. Retract the awning immediately under such conditions to prevent damage.
• Ensure no objects or persons are in the path of the awning during movement.
• Avoid continuous operation for extended periods to prevent motor overheating. Allow the motor to cool down if it has been running for a long time.

5. Maintenance

The Selve SP 2/40 motor is designed for low maintenance. However, regular checks can extend its lifespan and ensure safe operation.

• Annual Inspection: Annually inspect the motor and awning system for any signs of wear, loose connections, or damage to cables.
• Cleaning: Keep the motor area clean and free from dust and debris. Do not use abrasive cleaners or solvents.
• Lubrication: The motor's internal components are factory-lubricated and generally do not require additional lubrication.
• Professional Service: If you notice any unusual noises, erratic behavior, or significant wear, contact a qualified technician for inspection and repair.

6. Troubleshooting

Before contacting customer support, please refer to the following troubleshooting guide:

7. Technical Specifications

8. Warranty and Support

For warranty information and technical support, please contact your Selve product dealer or visit the official Selve website. Keep your proof of purchase for warranty claims.

Manufacturer: Selve

Manufacturer Reference: 352400