Introduction
The GOgroove BlueSYNC TYM is a versatile digital alarm clock speaker designed to enhance your audio experience and daily routine. It features advanced stereo drivers for rich sound, Bluetooth and NFC for wireless audio streaming, a built-in microphone for speakerphone functionality, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.
Front view of the GOgroove BlueSYNC TYM, displaying the time and date.
Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid placing the device near heat sources or in direct sunlight.
- Use only the provided power adapter to prevent damage.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep out of reach of children.
Product Overview
Familiarize yourself with the various components and controls of your BlueSYNC TYM.
Detailed view of the GOgroove BlueSYNC TYM, highlighting all buttons, ports, and the display.
Controls and Ports:
- Time Display: Front LED display for current time.
- Date Display: Front LED display for current date.
- NFC Tap-to-Pair: Top surface for quick NFC pairing.
- Multifunction Button: Top surface, typically for play/pause, answer/end calls.
- Volume Down Button: Top surface, decreases audio volume.
- Volume Up Button: Top surface, increases audio volume.
- Snooze Button: Top surface, for alarm snooze.
- Microphone: Integrated for speakerphone calls.
- USB Charging Port: Rear panel, for charging external devices (DC 5V 1A).
- DC 5V Port: Rear panel, for power input.
- AUX Line-In Button: Rear panel, for 3.5mm audio input.
- Alarm Button: Rear panel, for setting alarms.
- Time Button: Rear panel, for setting time.
- Down Button: Rear panel, for navigating menus or decreasing values.
- Up Button: Rear panel, for navigating menus or increasing values.
- 12/24H Button: Rear panel, for switching time format.
Setup
Power Connection:
- Connect the provided AC power adapter to the DC 5V port on the rear of the BlueSYNC TYM.
- Plug the other end of the power adapter into a standard wall outlet.
- The LED display will illuminate, indicating the device is powered on.
Operating Instructions
Setting Time and Date:
- Press and hold the TIME button on the rear panel until the time display begins to flash.
- Use the UP and DOWN buttons to adjust the hour. Press the TIME button again to confirm and move to minutes.
- Adjust minutes using the UP and DOWN buttons. Press TIME to confirm.
- Continue this process to set the year, month, and day.
- Press the 12/24H button to toggle between 12-hour and 24-hour time formats.
Setting Alarms:
- Press and hold the ALARM button on the rear panel until the alarm time display begins to flash.
- Use the UP and DOWN buttons to set the desired alarm hour and then minutes, pressing ALARM to confirm each step.
- After setting the time, you may be prompted to set the alarm recurrence (e.g., daily, weekdays). Use UP/DOWN to select and ALARM to confirm.
- To activate or deactivate an alarm, short press the ALARM button. The display will show an alarm icon when active.
- When the alarm sounds, press the SNOOZE button on the top panel to temporarily silence it.
Bluetooth Pairing:
The BlueSYNC TYM supports both standard Bluetooth pairing and NFC for quick connection.
The GOgroove BlueSYNC TYM can play music wirelessly from your device up to 30 feet away.
Standard Bluetooth Pairing:
- Ensure the BlueSYNC TYM is powered on.
- Activate Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for new Bluetooth devices. Select "BlueSYNC TYM" from the list.
- Once paired, the device will confirm the connection, and you can begin streaming audio.
NFC Tap-to-Pair:
Simply tap your NFC-enabled device to the designated area on the BlueSYNC TYM for instant pairing.
- Ensure NFC is enabled on your smartphone or tablet.
- Gently tap your NFC-enabled device to the NFC logo area on the top surface of the BlueSYNC TYM.
- Your device will automatically attempt to pair with the BlueSYNC TYM. Confirm the connection if prompted.
AUX Connection:
For devices without Bluetooth, use the 3.5mm AUX input.
Connect non-Bluetooth devices using the included 3.5mm AUX cable.
- Connect one end of a 3.5mm audio cable (not included) to the AUX port on the rear of the BlueSYNC TYM.
- Connect the other end of the cable to the headphone jack or audio output of your external device.
- The BlueSYNC TYM will automatically switch to AUX mode, or you may need to press the AUX Line-In button.
USB Charging:
The integrated USB port allows you to charge your mobile devices.
The BlueSYNC TYM features a built-in USB charging port for your devices.
- Connect your device's USB charging cable (not included) to the USB charging port on the rear of the BlueSYNC TYM.
- Connect the other end of the cable to your smartphone, MP3 player, or other USB-chargeable device.
- The BlueSYNC TYM will provide power to charge your connected device.
Speakerphone Function:
When paired via Bluetooth, the built-in microphone allows for hands-free calls.
- When a call comes in, press the Multifunction Button to answer.
- Speak towards the front of the unit for clear audio transmission.
- Press the Multifunction Button again to end the call.
Maintenance
- To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the speaker grilles free from dust and debris to maintain sound quality.
- Store the device in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| No power/Display is blank. | Ensure the power adapter is securely connected to both the device and a working wall outlet. Try a different outlet. |
| Cannot pair via Bluetooth. | Ensure Bluetooth is enabled on your device and the BlueSYNC TYM is in pairing mode. Move your device closer to the speaker. Forget "BlueSYNC TYM" from your device's Bluetooth list and try pairing again. |
| No sound or distorted sound. | Increase the volume on both the BlueSYNC TYM and your connected device. Ensure the audio cable is fully inserted for AUX connection. Check for obstructions around the speaker grilles. |
| USB charging is slow or not working. | Ensure the BlueSYNC TYM is powered on. The USB port provides 1A output; some devices may charge slower or require higher amperage. |
| Date format is incorrect (DD/MM vs MM/DD). | The device may have a fixed date display format. Refer to the Time and Date Setting section for available options. |
Specifications
| Feature | Detail |
|---|---|
| Brand | GOgroove |
| Model Number | GO-BSTYM220BDUS |
| Connectivity | Bluetooth, NFC, AUX (3.5mm), USB (charging) |
| Display Type | Digital LED |
| Power Source | Corded Electric |
| Material | Wood |
| Dimensions (L x W x H) | 5.6 x 4.1 x 2.9 inches |
| Item Weight | 1.75 pounds (794 Grams) |
| Special Features | Built-in microphone, Alarm clock, USB charging port |
Warranty and Support
The GOgroove BlueSYNC TYM is backed by a 3-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.
The GOgroove BlueSYNC TYM comes with a 3-Year Limited Warranty.
For warranty claims, technical assistance, or customer support, please visit the official GOgroove store or contact their customer service directly. You can find more information and support resources at the GOgroove Store on Amazon.