Bed Head Epic Volume Curling Wand Iron User Manual

1. Introduction and Product Overview

The Bed Head Epic Volume Curling Wand Iron is designed to help you achieve amazing loose curls with ease. Featuring a 1-inch Tourmaline Ceramic barrel, this curling wand ensures softer, shinier curls while minimizing frizz. Its clamp-free wrap-and-go design promotes even heat distribution for styles without kinks.

Key features include a 30-second fast heat-up time, instant heat recovery, a tangle-free swivel cord, automatic shut-off for safety, dual voltage capability for international travel, and a heat protective glove for comfortable use.

Figure 1: The Bed Head Epic Volume Curling Wand Iron (green handle) shown alongside its black heat protective glove.

2. Important Safety Information

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

• Always unplug the appliance immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• This appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use an extension cord with this appliance.
• This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
• Do not place the heated appliance directly on any surface while it is hot or plugged in.

3. Package Contents

Please check the package contents to ensure all items are present and in good condition.

• 1 x Bed Head Epic Volume Curling Wand Iron (1-inch barrel)
• 1 x Heat Protective Glove

Figure 2: The curling wand as it appears in its retail packaging.

4. Setup and First Use

1. Unpack the curling wand and the heat protective glove from the packaging.
2. Ensure your hair is clean, dry, and tangle-free before styling.
3. Plug the curling wand into a suitable electrical outlet. The appliance features dual voltage for international use, but an adapter may be required depending on your location.
4. Slide the power switch to the "ON" position. The indicator light will illuminate.
5. Allow the curling wand to heat up for approximately 30 seconds. The iron can reach temperatures up to 400°F (204°C).
6. Put on the heat protective glove on the hand you will use to wrap your hair around the barrel.

5. Operating Instructions

Follow these steps to achieve beautiful curls with your Bed Head Epic Volume Curling Wand:

1. Ensure the curling wand is heated to your desired temperature.
2. Wearing the heat protective glove, take a section of hair (approximately 1-inch wide) and wrap it around the heated barrel, starting from the root and working towards the tip. The clamp-free design allows for smooth wrapping.
3. Hold the hair in place for a few seconds (the exact time will vary based on hair type and desired curl intensity).
4. Carefully unwrap the hair from the barrel. Do not pull.
5. Repeat the process for all sections of hair.
6. For a more natural look, gently run your fingers through your curls after they have cooled.
7. When finished, slide the power switch to the "OFF" position and unplug the appliance.

Figure 3: Demonstrating the use of the curling wand with the heat protective glove for safe and effective styling.

6. Maintenance and Care

• Always unplug the appliance and allow it to cool completely before cleaning.
• Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the appliance is completely dry before storing.
• Store the curling wand in a cool, dry place, away from moisture.
• Do not wrap the cord around the appliance, as this can damage the cord.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or visit the official Bed Head website.

If you encounter any issues not covered in this manual, please contact Bed Head customer service for assistance.