Stanley 70-963 8-Piece Combination Spanner Set User Manual

1. Introduction

This user manual provides essential information for the safe and effective use, maintenance, and care of your Stanley 70-963 8-Piece Combination Spanner Set. Please read these instructions thoroughly before using the tools to ensure proper operation and to prevent injury or damage.

2. Product Overview

The Stanley 70-963 is an 8-piece combination spanner set designed for various fastening tasks. Each spanner features both an open-end and a ring-end (box-end) for versatility. The tools are manufactured from high-quality Chrome Vanadium Steel, ensuring durability and resistance to rust.

Figure 2.1: The complete Stanley 70-963 8-piece combination spanner set, neatly arranged in its yellow holder.

2.1 Key Features

• Material: Constructed from high-quality Chrome Vanadium Steel for strength and longevity.
• Durability: Designed to be strong, durable, and rust-free.
• Set Composition: Includes 8 combination spanners.
• Sizes Included: 8mm, 10mm, 11mm, 13mm, 14mm, 15mm, 17mm, and 22mm.
• Maxi-Drive System: Features a uniquely shaped jaw and ring-end that grips the fastener on its face rather than the corners, reducing the risk of slipping and rounding off nuts/bolts.
• Compliance: All tools are manufactured according to ANSI specifications.

Figure 2.2: Close-up view highlighting the strong build and corrosion-resistant nickel-chrome coating of the spanners.

Figure 2.3: Illustration of the Maxi-Drive feature, demonstrating how it distributes force away from fastener corners, preventing damage and allowing for greater torque.

3. Setup and Preparation

The Stanley 70-963 spanner set requires minimal setup. Upon receiving the product, perform the following steps:

1. Unpack: Carefully remove the spanners from their packaging.
2. Inspect: Examine each spanner for any signs of damage or manufacturing defects. Do not use damaged tools.
3. Familiarize: Identify the different sizes and the open-end and ring-end of each spanner. The yellow holder keeps the spanners organized by size.

Figure 3.1: The spanner set stored in its yellow plastic organizer, demonstrating easy access and size identification.

4. Operating Instructions

Follow these guidelines for safe and effective use of your combination spanners.

4.1 Safety Precautions

• Always wear appropriate personal protective equipment (PPE), such as safety glasses, when using hand tools.
• Ensure the spanner size matches the fastener size exactly to prevent slipping and damage to both the tool and the fastener.
• Do not use spanners with worn or damaged jaws.
• Never extend the handle of a spanner with a pipe or other leverage-increasing device, as this can overload the tool and cause breakage or injury.
• Pull on the spanner rather than push, whenever possible, to avoid injury if the spanner slips.
• Keep hands clear of pinch points.

4.2 Using the Spanners

1. Select Correct Size: Choose the spanner that precisely fits the nut or bolt you are working on. Using an incorrect size can round off the fastener.
2. Position the Spanner:
   • For the open-end, ensure it is fully seated on the fastener.
   • For the ring-end (box-end), slide it completely over the fastener. The Maxi-Drive design will engage the flats of the fastener for a secure grip.
3. Apply Force: Apply steady, firm pressure. For tightening, turn clockwise. For loosening, turn counter-clockwise. Ensure your stance is stable to prevent slipping.
4. Reposition: If the fastener requires more than a quarter turn, remove and reposition the spanner as needed.

Figure 4.1: A Stanley spanner being used to tighten a fastener, demonstrating its application for home, garage, or office tasks.

Figure 4.2: A gloved hand holding a Stanley combination spanner, illustrating proper grip and readiness for use in a workshop environment.

5. Maintenance and Storage

Proper maintenance and storage will extend the life of your Stanley spanner set.

• Cleaning: After each use, wipe the spanners clean with a dry cloth to remove dirt, grease, or moisture. For stubborn grime, use a mild solvent and then dry thoroughly.
• Rust Prevention: Although rust-resistant, prolonged exposure to moisture can cause corrosion. Ensure tools are dry before storage. A light coat of oil can be applied for long-term storage in humid environments.
• Storage: Store the spanners in their original yellow holder or a suitable toolbox in a dry environment. This prevents loss and protects them from damage.
• Inspection: Periodically inspect spanners for any signs of wear, cracks, or deformation. Replace any damaged tools immediately.

6. Troubleshooting

This section addresses common issues encountered during the use of combination spanners.

• Spanner Slipping:
  • Ensure the spanner size precisely matches the fastener.
  • Confirm the spanner is fully seated on the fastener.
  • Check if the fastener is rounded or damaged; if so, specialized tools may be required.
  • Avoid excessive force or improper angles.
• Fastener Damage (Rounding Off):
  • This often occurs when using an oversized spanner or a spanner with worn jaws. Always use the correct size.
  • Ensure the spanner's jaws are clean and free of debris.
  • The Maxi-Drive system is designed to minimize this risk by gripping the flats of the fastener.
• Tool Breakage:
  • Do not use spanners as pry bars or hammers.
  • Never use extension pipes to increase leverage beyond the tool's design limits.
  • Replace any spanner showing signs of cracks or bending.

7. Specifications

Detailed specifications for the Stanley 70-963 8-Piece Combination Spanner Set.

Figure 7.1: A full display of the 8 combination spanners, each marked with its size and the Stanley brand.

Figure 7.2: Detailed view of the open-end of a spanner, clearly showing the size marking (e.g., 19mm).

Figure 7.3: Detailed view of the ring-end (box-end) of a spanner, showcasing the Maxi-Drive design for enhanced grip.

8. Warranty and Support

Stanley is committed to providing quality tools and excellent customer service. For any inquiries, support, or warranty information, please use the contact details below.

Figure 8.1: Stanley Total Care contact information for sales, after-sales support, warranty, and service network.

8.1 Customer Care Contact

• Phone: 1800-203-0644 (Monday - Saturday, 09:00 AM - 06:00 PM IST, except government holidays)
• Email: SBD-CUSTOMERCOMMUNICATIONS@SBDINC.COM
• WhatsApp: +91 96060 55835
• Authorized Service Centers: Over 500+ service centers available.

For detailed warranty terms and conditions, please refer to the official Stanley website or contact customer support.