Product Overview
The Aquascape UltraKlean 3500 Biological Pressure Filter is designed to provide powerful and efficient filtration for ponds up to 3,500 gallons. This system combines mechanical and biological filtration with an integrated 28-watt UV clarifier to ensure crystal clear and healthy pond water. Its self-cleaning backwash system simplifies maintenance, making pond care more manageable.
Figure 1: Aquascape UltraKlean 3500 Biological Pressure Filter.
Key Features:
- Powerful Filtration: Effectively filters ponds up to 3,500 gallons, removing debris and maintaining optimal water conditions.
- Integrated 28W UV Clarifier: Eliminates suspended algae to prevent green water and enhance pond clarity.
- Self-Cleaning Backwash System: Easy-to-use feature allows for quick maintenance without disassembling the filter.
- Sponge-Free Biological Media: Reduces maintenance while promoting beneficial bacteria for natural filtration.
- Complete Installation Kit: Includes all necessary fittings for quick and hassle-free setup in new or existing ponds.
Figure 2: Comparison of Aquascape UltraKlean 2000 and 3500 models.
Setup and Installation
The UltraKlean filter is designed for straightforward installation. It can be placed next to your pond or partially buried to blend into the landscape. Ensure all connections are secure to prevent leaks.
Figure 3: Front view of the filter, highlighting inlet and outlet connections.
Installation Steps:
- Positioning: Place the filter on a stable, level surface near your pond. It can be partially buried for aesthetic integration.
- Connect Pump: Attach the pond pump's discharge hose to the filter's inlet connection.
- Connect Return Line: Connect a hose from the filter's outlet to your pond's return line or waterfall.
- Backwash Line: Connect a hose to the backwash discharge port, directing it to a suitable drainage area.
- Secure Connections: Use hose clamps to secure all hose connections to prevent leaks.
- Power Connection: Plug the filter's power cord into a GFCI-protected outdoor outlet.
Video 1: Official Aquascape guide to setting up and operating the UltraKlean Pond Filter.
Operating Instructions
Once installed, the UltraKlean filter operates continuously to maintain water quality. The filtration process involves mechanical and biological media, followed by UV clarification.
Figure 4: Internal components and water flow path within the UltraKlean filter.
UV Clarifier Operation:
The integrated UV clarifier helps eliminate green water algae. The control panel allows you to adjust the UV bulb's operating time to conserve energy and extend bulb life.
Figure 5: Control panel for adjusting UV clarifier settings and monitoring filter status.
- UV Time Settings: Use the 'Select UV Time' button to choose between 6, 12, or 24 hours of UV operation per day. This feature helps optimize bulb life and energy consumption.
- UV Clarifying Indicator: A blue LED light indicates when the UV clarifier is active.
Maintenance
The UltraKlean filter features a convenient self-cleaning backwash system, eliminating the need to open the filter for routine cleaning.
Backwash Cleaning Procedure:
- Monitor Clean Indicator: The control panel includes a 'Clean' indicator light (red/yellow LED) that signals when it's time to perform a backwash.
- Initiate Backwash: Turn the knob at the top of the filter to the "CLEAN" setting. This reverses the water flow and agitates the biological media, dislodging trapped debris.
- Discharge Waste: Dirty water will be expelled through the backwash discharge hose. Continue until the water runs clear.
- Reset Filter: Turn the knob back to the "FILTER" setting. Press the 'Reset Clean' button on the control panel to reset the indicator.
This process typically takes less than 5 minutes and should be performed as indicated by the 'Clean' light or when water flow significantly decreases.
Troubleshooting
This section addresses common issues you might encounter with your UltraKlean filter.
- Green Water Persists: Ensure the UV clarifier is operating for an adequate duration (e.g., 24 hours initially for severe cases). Check if the UV bulb needs replacement (typically annually). Verify proper water flow through the filter.
- Reduced Water Flow: This often indicates the filter media is clogged. Perform a backwash cleaning as described in the Maintenance section. Ensure your pump is operating correctly and is appropriately sized for your pond and filter.
- Leaking Connections: Check all hose clamps and fittings for tightness. Ensure O-rings are properly seated and not damaged.
- UV Light Not On: Check the power connection and the UV Clarifying indicator light on the control panel. If the bulb is old, it may need replacement.
Specifications
Figure 6: Detailed technical specifications for UltraKlean filter models.
| Feature | Detail |
|---|---|
| Brand | Aquascape |
| Model Number | 95054 |
| Color | Black |
| Material | Plastic |
| Product Dimensions | 14"L x 14"W x 22"H |
| Item Weight | 1 pounds (16 ounces) |
| Power Source | Corded Electric |
| Maximum Flow Rate | 19684 Liters Per Hour (5,200 GPH) |
| Voltage | 120 Volts |
| UV Wattage | 28 Watt |
| Recommended Pond Size | Up to 3,500 Gallons |
Warranty and Support
Warranty Information:
The Aquascape UltraKlean 3500 Biological Pressure Filter is backed by a 3-year limited warranty. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, replacement parts, or warranty inquiries, please contact Aquascape customer support directly. Refer to the product packaging or the official Aquascape website for the most current contact information.
