Introduction
The Vivitar Tag & Blast Wireless Bluetooth Speaker is designed for portable audio enjoyment. This speaker features Bluetooth technology for wireless connectivity with compatible devices, offering a digital stereo sound experience. Its compact design makes it suitable for use in various outdoor and indoor settings. The speaker includes a rechargeable battery for extended use.
What's in the Box
- Vivitar Tag & Blast Wireless Bluetooth Speaker
Product Overview
The Vivitar Tag & Blast speaker is engineered for simplicity and portability. Below is an image of the speaker, highlighting its general appearance.
Key features include:
- Bluetooth technology for wireless audio streaming.
- Compatibility with various Bluetooth-enabled devices such as iPod, iPhone, iPad, smartphones, and tablets.
- Designed for ultimate portability, allowing you to take your music anywhere.
Setup
Charging the Speaker
The Vivitar Tag & Blast speaker is powered by a rechargeable battery. Before initial use, ensure the speaker is fully charged.
- Locate the charging port on the speaker.
- Connect the appropriate charging cable (not specified in product details, typically USB) to the speaker and a power source.
- Allow the speaker to charge until the charging indicator (if present) shows a full charge.
Bluetooth Pairing
To connect your speaker to a Bluetooth-enabled device:
- Ensure the speaker is powered on and in pairing mode. (Refer to the speaker's physical controls for specific pairing button/indicator, if available).
- On your device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
- Enable Bluetooth and search for available devices.
- Select "Vivitar Tag & Blast" or a similar name from the list of found devices.
- Once connected, the speaker will indicate a successful pairing (e.g., an audible tone or LED indicator).
Operating Instructions
Power On/Off
To power the speaker on or off, locate the power button (control method is 'Touch' as per specifications) and press and hold it until the speaker indicates power status (e.g., LED light, sound cue).
Audio Playback
Once paired with your device, audio played on your device will stream through the Vivitar Tag & Blast speaker. Use your connected device to control playback (play/pause, skip tracks) and volume.
Maintenance
To ensure the longevity and optimal performance of your Vivitar Tag & Blast speaker:
- Keep the speaker clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- While designed for outdoor use, the speaker is not waterproof. Avoid submerging it in water or exposing it to heavy rain.
- Store the speaker in a cool, dry place when not in use.
Troubleshooting
If you encounter issues with your Vivitar Tag & Blast speaker, try the following solutions:
- No Power: Ensure the speaker is fully charged. Connect it to a power source and allow it to charge for at least 30 minutes before attempting to power it on again.
- Cannot Pair with Device:
- Make sure the speaker is in pairing mode.
- Ensure Bluetooth is enabled on your device and it is within range (typically 10 meters or 33 feet).
- Turn off and on both the speaker and your device's Bluetooth.
- If previously paired, try forgetting the speaker from your device's Bluetooth list and re-pairing.
- No Sound or Low Volume:
- Check the volume levels on both the speaker and your connected device.
- Ensure the speaker is properly paired and connected to your device.
- Try playing audio from a different application or source on your device.
- Poor Audio Quality:
- Move the speaker closer to your device to reduce interference.
- Ensure there are no obstructions between the speaker and your device.
- Check for other active Bluetooth devices in the vicinity that might cause interference.
Specifications
| Feature | Detail |
|---|---|
| Model Name | BTSP-TAG |
| Brand | Vivitar |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Speaker Type | Bookshelf (Portable) |
| Audio Output Mode | Stereo |
| Surround Sound Channel Configuration | 2.0 |
| Control Method | Touch |
| Power Source | Battery Powered |
| Batteries | 2 Lithium Ion batteries required (included) |
| Compatible Devices | MP3 Player, Smartphone, Tablet |
| Recommended Uses | For Smartphones or Tablets, For Outdoor Use |
| Color | Silver |
| Product Dimensions | 5 x 2.5 x 5 inches |
| Item Weight | 7.2 ounces (0.45 Pounds) |
| Is Waterproof | FALSE |
| Manufacturer | Sakar International, Inc. |
Warranty and Support
The Vivitar Tag & Blast Wireless Bluetooth Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and how to obtain service, please refer to the warranty card included with your product or contact Vivitar customer support directly. Contact information for support can typically be found on the manufacturer's official website or on the product packaging.
