SUZUKI 07130-0525B Stator Bolt Product Information and Installation Guide

1. Introduction

This document serves as an informational guide for the SUZUKI 07130-0525B Stator Bolt. This component is a genuine Original Equipment Manufacturer (OEM) part designed specifically for Suzuki applications. It is crucial for securing the stator within the engine assembly, ensuring proper electrical system function. Adherence to proper installation procedures is essential for the longevity and performance of your vehicle or equipment.

2. Product Overview

The 07130-0525B is a high-quality bolt manufactured by Suzuki to precise specifications. Its primary function is to securely fasten the stator, a key component of the charging system, to the engine casing. Using genuine Suzuki parts ensures compatibility, reliability, and maintains the original performance standards of your Suzuki product.

This image displays the official Suzuki Genuine Parts packaging label for the 07130-0525B Stator Bolt. It confirms the authenticity of the part, featuring the Suzuki logo, part number, and 'ORIGINAL SUZUKI PART' text, along with manufacturing details.

3. Installation Guidelines

Proper installation of the stator bolt is critical. Always refer to the specific service manual for your Suzuki vehicle or equipment for detailed, model-specific instructions and torque specifications. The following are general guidelines:

1. Safety First: Ensure the vehicle/equipment is turned off, cooled down, and secured. Disconnect the battery if working near electrical components.
2. Tools: Use appropriate tools to prevent damage to the bolt head or surrounding components.
3. Removal: Carefully remove the old stator bolt(s). Inspect the threads in the engine casing for any damage.
4. Preparation: Clean the bolt hole and the mating surfaces thoroughly. Ensure no debris or old thread locker remains.
5. Installation: Insert the new SUZUKI 07130-0525B Stator Bolt. Hand-tighten initially to ensure proper thread engagement.
6. Torque Specification: Tighten the bolt to the exact torque specification provided in your vehicle's official Suzuki service manual. Over-tightening can strip threads or damage components, while under-tightening can lead to loosening and potential failure.
7. Thread Locker: If specified by the service manual, apply the recommended type and amount of thread-locking compound to the bolt threads before installation.

Warning: Failure to follow the manufacturer's specific installation and torque procedures can result in component damage, electrical system malfunction, or personal injury.

4. Maintenance

As a critical fastening component, the stator bolt itself requires minimal direct maintenance. However, during routine engine inspections or service, it is advisable to:

• Visually inspect the bolt head for any signs of damage or corrosion.
• Check for any signs of loosening. If a bolt appears loose, consult your service manual for re-torquing procedures.
• Ensure the stator remains securely mounted without excessive movement or vibration.

5. Troubleshooting

Issues related to a stator bolt typically stem from improper installation or material fatigue over extended periods. If you experience any of the following, investigate the stator and its mounting:

• Loose Stator: If the stator is not securely fastened, it can vibrate, leading to noise, damage to the stator windings, or failure of the charging system. This often indicates an improperly torqued or failed bolt.
• Oil Leaks: In some applications, a loose or damaged stator bolt can compromise the seal of the engine casing, leading to oil leaks.
• Electrical Malfunctions: While less direct, a severely loose stator could potentially affect its alignment and function, leading to charging system issues.

If any of these symptoms occur, it is recommended to consult a qualified mechanic or refer to your Suzuki service manual for diagnostic and repair procedures.

6. Specifications

7. Warranty Information

Genuine Suzuki OEM parts are typically covered by a limited warranty against defects in material and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase. For detailed warranty information, refer to the official Suzuki warranty policy provided with your vehicle or equipment, or contact an authorized Suzuki dealer.

8. Support

For further assistance, technical inquiries, or to locate an authorized service center, please contact your local authorized Suzuki dealer or visit the official Suzuki website for your region. When contacting support, please have your vehicle/equipment model information and the part number (07130-0525B) readily available.