Introduction
Thank you for choosing the SVAKOM Lester Warming Rabbit Vibe. This manual provides detailed instructions for the safe and effective use, maintenance, and care of your device. Please read this manual thoroughly before first use and retain it for future reference.
Product Features
- Material: Crafted from medical-grade silicone for safety and comfort.
- Design: Ergonomically curved for targeted stimulation.
- Vibration Modes: Features 8 distinct vibration modes for varied experiences.
- Operating Modes: Includes 4 operating modes to control vibration, speed, and intensity.
- Warming Function: Integrated self-heating core reaches approximately 104°F (40°C).
- Dual Motors: Equipped with two independent motors for comprehensive stimulation.
- Rechargeable: Utilizes 100% green technology with a polymer battery for extended use.
- Water Repellency: IPX4 rated for splash resistance.
- Quiet Operation: Designed for noiseless performance.
- Phthalate and Latex Free: Ensures user safety and comfort.
Setup
Charging
- Locate the charging port on the device.
- Connect the provided USB charging cable to the device and a suitable USB power source (e.g., computer, wall adapter).
- The indicator light will illuminate during charging.
- A full charge typically takes approximately 2.5 hours. The indicator light will change or turn off once charging is complete.
- Ensure the device is fully charged before its first use to maximize battery life.
First Use Preparation
Before the initial use, and after each subsequent use, clean the device thoroughly according to the 'Cleaning' instructions in the Maintenance section.
Operation
Power On/Off
- To power on the device, press and hold the power button (usually marked with the SVAKOM logo) for 2-3 seconds. The device will vibrate briefly to indicate it is on.
- To power off the device, press and hold the power button again for 2-3 seconds until the vibrations cease.
Vibration Modes
- Once powered on, short press the power button to cycle through the 8 distinct vibration modes.
- Each press will advance to the next mode. Find the mode that best suits your preference.
Warming Function
- The Lester features an internal heating core. To activate the warming function, refer to the specific button or combination of buttons indicated in your device's quick start guide (not detailed in product description, assuming a separate control).
- The device will gradually warm up to approximately 104°F (40°C).
- To deactivate the warming function, repeat the activation step.
SVAKOM Intelligent Mode
The SVAKOM Intelligent Mode offers a unique, adaptive experience. To activate this mode, consult your device's quick start guide for specific button presses. This mode is designed to provide varied patterns and intensities automatically.
Maintenance
Cleaning
- Always clean the device before and after each use.
- Wash the device with warm water and a mild, toy-friendly soap.
- Rinse thoroughly to remove all soap residue.
- Dry completely with a lint-free cloth or air dry.
- Do not use cleaners containing alcohol, petroleum, or acetone, as these can damage the silicone material.
- The device is IPX4 water repellent, meaning it is protected against splashing water from any direction. Do not submerge the device in water.
Storage
- Store the device in a clean, dry, and cool place, away from direct sunlight and extreme temperatures.
- Keep it separate from other toys made of different materials to prevent material degradation.
- Ensure the device is fully charged before long-term storage to maintain battery health.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. If the issue persists, try a different charging cable or power source.
- Vibrations are weak or inconsistent: The battery may be low. Recharge the device.
- Warming function not working: Ensure the device is powered on and the warming function is activated correctly. Check battery level.
- Charging indicator not lighting up: Verify the charging cable is securely connected to both the device and the power source.
If you experience any issues not covered here, please refer to the 'Warranty and Support' section for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | Lester |
| Material | Medical-grade Silicone |
| Color | Violet |
| Dimensions | 200 x 88 x 38mm (7.87 x 3.46 x 1.5 inches) |
| Weight | 190g (0.42 lbs) |
| Battery Type | Polymer Battery |
| Battery Capacity | 2200mAh |
| Charging Time | Approx. 2.5 hours |
| Maximum Continuous Use | Up to 48 hours |
| Vibration Modes | 8 |
| Warming Temperature | Approx. 104°F (40°C) |
| Water Repellency | IPX4 (Splash-proof) |
Safety Information
- This device is intended for adult use only.
- Do not use if the device appears damaged or defective.
- Discontinue use immediately if you experience any discomfort or pain.
- Consult a healthcare professional if you have any medical conditions or concerns before use.
- Keep out of reach of children.
- Use only water-based lubricants with this silicone product. Oil-based lubricants can damage the silicone material.
- Do not expose the device to extreme heat or open flames.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your SVAKOM Lester Warming Rabbit Vibe, please contact the retailer or manufacturer directly. Retain your proof of purchase for warranty claims.
