DIRECTV RC66X Universal Remote Control User Manual

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of your DIRECTV RC66X Universal Remote Control. The RC66X is designed to replace older models such as the RC65X, RC23, RC32, RC64, and RC65, offering full compatibility with a wide range of DIRECTV receivers including H10, H20, D10, D11, D12, R15, H24, H25, HR24, and HR34. This infrared (IR) remote control allows you to manage your DIRECTV receiver and other home entertainment devices, reducing the need for multiple remotes.

2. Package Contents

• 1 x DIRECTV RC66X Universal Remote Control
• 2 x AA Batteries

3. Product Overview

The DIRECTV RC66X remote control features an ergonomic design with clearly labeled buttons for intuitive use. It operates using infrared technology and is powered by two AA batteries.

Image 1: Front view of the DIRECTV RC66X Universal Remote Control.

Button Functions:

• TV INPUT: Cycles through TV video inputs.
• PWR (Power): Turns the DIRECTV receiver on or off.
• ON/OFF (TV Power): Turns the television on or off.
• FORMAT: Changes the screen format.
• REW, PLAY, FF, PAUSE, STOP, REC: Standard media playback and recording controls.
• GUIDE: Displays the program guide.
• ACTIVE: Accesses the DIRECTV Active channel.
• LIST: Displays your recorded programs (Playlist).
• EXIT: Exits current menu or guide.
• BACK: Returns to the previous screen or menu.
• INFO: Displays program information.
• MENU: Accesses the main DIRECTV menu.
• Directional Pad (Up, Down, Left, Right) & SELECT: Navigates menus and selects items.
• Red, Green, Yellow, Blue Buttons: Context-sensitive function buttons, often used for interactive features.
• VOL (+/-): Adjusts television volume.
• CHAN PAGE (Up/Down): Changes channels or pages through guide.
• MUTE: Mutes television audio.
• PREV: Returns to the previous channel.
• Number Pad (0-9, DASH, ENTER): For direct channel entry and other numerical inputs.

4. Setup

4.1. Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards and lift it off.
3. Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Replace the battery cover by sliding it back into place until it clicks securely.

4.2. Programming the Remote for your DIRECTV Receiver

The RC66X remote is typically pre-programmed to control most DIRECTV receivers. If it does not work immediately, follow these steps:

1. Point the remote at your DIRECTV receiver.
2. Press and hold the MUTE and SELECT buttons simultaneously until the green light at the top of the remote flashes twice.
3. Enter 961. The green light will flash twice.
4. Press the CHAN UP button once.
5. Press the SELECT button. The green light will flash twice.
6. Test the remote by trying to change channels or access the guide.

4.3. Programming the Remote for your Television

To control your television's power and volume with the RC66X remote, you need to program it with your TV's brand code.

1. Turn on your television.
2. Press and hold the MUTE and SELECT buttons simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit TV code for your television brand. (Common codes can be found in your TV's manual or online. If you don't have a code, try the code search method below.) The green light will flash twice.
4. Point the remote at your TV and press the PWR (TV Power) button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat steps 2-4 with a different code for your TV brand.

Code Search Method (if you don't know your TV code):

1. Turn on your television.
2. Press and hold the MUTE and SELECT buttons simultaneously until the green light at the top of the remote flashes twice.
3. Enter 991. The green light will flash twice.
4. Press the CHAN UP button repeatedly (slowly, about every 2 seconds) while pointing the remote at your TV. Stop when your TV turns off.
5. Once the TV turns off, press the SELECT button to lock in the code. The green light will flash twice.
6. Test the remote by turning the TV on/off and adjusting the volume.

5. Operating Instructions

5.1. Controlling your DIRECTV Receiver

• Power On/Off: Press the PWR button.
• Change Channels: Use the CHAN PAGE buttons or the number pad to enter a channel number and press ENTER.
• Access Guide: Press the GUIDE button.
• Access Recorded Programs: Press the LIST button.
• Navigate Menus: Use the directional pad and SELECT button.
• Record Programs: Press the REC button while watching a program or from the guide.
• Playback Controls: Use PLAY, PAUSE, REW, FF, STOP for recorded content.

5.2. Controlling your Television

• Power On/Off: Press the ON/OFF (TV Power) button.
• Adjust Volume: Use the VOL (+/-) buttons.
• Mute Audio: Press the MUTE button.
• Change TV Input: Press the TV INPUT button.

6. Troubleshooting

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries when the remote's indicator light becomes dim or the remote becomes unresponsive. Always replace both batteries at the same time with new AA batteries.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

8. Specifications

9. Warranty and Support

Warranty information for the DIRECTV RC66X Universal Remote Control is typically provided by the retailer or manufacturer at the time of purchase. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support or further assistance, please contact DIRECTV customer service or visit their official support website. You may also refer to the support resources provided by your product retailer.