Introduction
Thank you for choosing the OttLite F23WG3 Flex & Store Desk Lamp. This lamp is designed to provide clear, low-heat, and low-glare OttLite Illumination, which helps reduce eyestrain. Its innovative Flex-Neck and convenient storage compartment enhance functionality and organization for your workspace. Please read this manual thoroughly before use to ensure proper setup and operation.
Product Overview
Key Features:
- Innovative Flex-Neck: Allows for precise positioning of light.
- Convenient Storage Pocket: Helps keep your workspace organized.
- Expansive Shade: Provides broad illumination for your work area.
- OttLite Illumination: Low heat, low glare lighting designed to reduce eyestrain.
- Long-Lasting Bulb: Includes a bulb rated to last up to 10,000 hours (Replacement bulb type E).
This lamp combines practical design with advanced lighting technology to create an optimal environment for tasks requiring detailed vision.
Setup
- Unpack the Lamp: Carefully remove all components from the packaging. Ensure all parts are present: the lamp base, flexible neck with shade, and AC/DC power adapter.
- Position the Lamp: Place the lamp on a stable, flat surface such as a desk or table. Ensure there is enough space for the flexible neck to be adjusted freely.
- Connect Power: Insert the small end of the AC/DC power adapter into the power input jack located on the back or base of the lamp. Plug the other end of the power adapter into a standard electrical outlet.
- Verify Bulb Installation: The lamp comes with a bulb pre-installed. Ensure it is securely seated in the socket. If not, gently twist it clockwise until snug.
Operating Instructions
- Turning On/Off: Locate the power switch, typically on the base of the lamp. Press or toggle the switch to turn the lamp on. Press or toggle it again to turn the lamp off.
- Adjusting the Light: Gently bend and twist the flexible neck to position the light exactly where needed. Avoid excessive force when adjusting the neck to prevent damage.
- Using the Storage Compartment: Utilize the integrated storage pocket in the base to keep small items like pens, paper clips, or other desk accessories organized and within reach.
Maintenance
Cleaning:
- Always unplug the lamp before cleaning.
- Wipe the lamp's exterior surfaces with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement:
- The lamp uses a Type E replacement bulb.
- Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it.
- Carefully unscrew the old bulb counter-clockwise.
- Screw in the new Type E bulb clockwise until it is snug. Do not overtighten.
- Dispose of old bulbs according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
| Lamp is unstable. |
|
|
Specifications
- Model Number: F23WG3
- Product Dimensions: 5.48"D x 9.87"W x 14.03"H
- Item Weight: 3.2 Pounds
- Lamp Type: Desk Lamp
- Base Material: Metal
- Bulb Base: E26 Medium
- Wattage: 12 watts
- Power Source: Corded Electric
- Included Components: Lamp, AC/DC Power Adapter
- Manufacturer: OttLite Technologies
- UPC: 761712007205
Warranty and Support
Warranty Information:
The warranty covers OttLite bulbs for 1 year from the date of purchase. OttLite lamps and accessories (excluding batteries) are covered for 2 years from the date of purchase. This warranty does not cover damages resulting from using the product for any purpose other than its intended use. Warranty coverage also excludes items purchased "as is" or from unauthorized retailers.
Customer Support:
For further assistance, troubleshooting not covered in this manual, or warranty claims, please contact OttLite Customer Support. Refer to the official OttLite website or product packaging for the most current contact information.





