Storkcraft 06550-609

Storkcraft Premium Hoop Glider & Ottoman Instruction Manual

Model: 06550-609

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Storkcraft Premium Hoop Glider & Ottoman. Please read all instructions carefully before assembly and use to ensure safe and proper functioning of the product.

Safety Information

Important Safety Warnings:

  • For safe use, ensure proper assembly according to these instructions.
  • Do not exceed the maximum recommended weight capacity of 250 pounds.
  • Keep small parts away from children during assembly.
  • Regularly check all bolts and fasteners to ensure they are tight.
  • Do not allow children to play on or around the glider unsupervised.
  • Avoid placing the glider near windows where cords from blinds or drapes could pose a strangulation hazard.

Parts List

Before beginning assembly, verify that all components are present and undamaged. The package should contain:

  • Glider Chair Frame Components
  • Ottoman Frame (often pre-assembled)
  • Seat and Back Cushions
  • Arm Cushions with Side Pockets
  • Hardware Pack (bolts, washers, nuts, Allen wrench)
  • Assembly Instructions (this manual)

If any parts are missing or damaged, please contact Storkcraft Customer Care.

Setup and Assembly

Assembly typically takes approximately 30 minutes. Two people are recommended for easier assembly.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
  2. Assemble Glider Base: Follow the diagrams provided in the hardware pack to connect the glider's base components. Ensure all bolts are finger-tightened initially.
  3. Attach Backrest and Armrests: Secure the backrest to the glider base. Then, attach the armrests, ensuring the side pockets are correctly oriented.
  4. Tighten All Fasteners: Once all frame components are in place, use the provided Allen wrench to fully tighten all bolts. Do not overtighten.
  5. Install Cushions: Place the seat and back cushions onto the glider frame. Secure them using any ties or fasteners provided. Attach the arm cushions.
  6. Ottoman: The ottoman typically comes pre-assembled. If not, follow the specific instructions for its assembly.
Storkcraft Hoop Glider and Ottoman assembly diagram
Figure 1: Example of glider and ottoman components during assembly. This image illustrates the various parts that come together to form the complete glider and ottoman set.
Storkcraft Hoop Glider and Ottoman with cushions
Figure 2: The fully assembled Storkcraft Hoop Glider and Ottoman with all cushions in place, ready for use.

Operating Instructions

The Storkcraft Premium Hoop Glider & Ottoman is designed for smooth, comfortable motion.

  • Gliding Motion: Gently push off the floor with your feet to initiate the smooth forward-and-back gliding motion. The glider features enclosed metal ball bearings for consistent movement.
  • Ottoman Use: The accompanying ottoman glides in sync with the chair, providing coordinated leg support.
  • Side Pockets: Utilize the integrated side storage pockets on the arm cushions to keep small items such as books, remote controls, or baby essentials within easy reach.
Storkcraft Hoop Glider with side pocket
Figure 3: Close-up view of the glider's armrest, highlighting the convenient side storage pocket for holding small items.
Storkcraft Hoop Glider smooth gliding motion
Figure 4: Illustration demonstrating the smooth gliding mechanism of the Storkcraft Hoop Glider and Ottoman, emphasizing the forward and backward movement.

Maintenance

Proper care will extend the life and appearance of your glider and ottoman.

  • Cleaning: Spot clean cushions as needed. For the wood frame, wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Fastener Checks: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
  • Environmental Conditions: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the wood finish and fabric.

Troubleshooting

If you encounter any issues with your glider, consider the following:

  • Squeaking Noise: Ensure all assembly bolts are securely tightened. A small amount of silicone-based lubricant can be applied to the metal ball bearings if squeaking persists, but avoid oil-based lubricants.
  • Unstable Gliding: Verify that the glider is placed on a flat, even surface. Recheck all connections for tightness.
  • Cushion Shifting: Ensure cushions are properly secured with their ties or fasteners to prevent movement during use.

Specifications

BrandStorkcraft
Model Number06550-609
ColorEspresso/Gray
MaterialWood (Solid Wood Craftsmanship)
Product Dimensions (L x W x H)30.31 x 29.92 x 39.96 inches
Item Weight46 pounds
Maximum Weight Recommendation250 Pounds
Special FeaturesFoot Rest, Side Pocket, GREENGUARD Gold Certified
Storkcraft Hoop Glider and Ottoman dimensions diagram
Figure 5: Detailed dimensions of the Storkcraft Hoop Glider and Ottoman, including height, width, and depth for both the chair and the footrest.

Warranty and Support

The Storkcraft Premium Hoop Glider & Ottoman is backed by Storkcraft's 1-year limited warranty.

For warranty claims, missing parts, or any product-related inquiries, please contact the Storkcraft Customer Care team. Refer to the contact information provided in your product packaging or on the official Storkcraft website.

© 2025 Storkcraft. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.