Modway Track 36-inch Round Dining Table User Manual

1. Introduction

This manual provides essential information for the assembly, operation, maintenance, and care of your Modway Track 36-inch Round Dining Table. Please read these instructions thoroughly before assembly and retain them for future reference.

The Modway Track Dining Table features a minimalist modern design with solid beechwood legs and a smooth veneer round top, suitable for various dining and kitchen environments.

2. Safety Information

• Always assemble the table on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight recommendation of 40 pounds (18.1 kg) on the tabletop.
• Keep small parts away from children during assembly to prevent choking hazards.
• Avoid standing or sitting on the table.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Modway customer support.

• Round Tabletop (1)
• Table Legs (4)
• Hardware Pack (Screws, Spring Washers, Flat Washers, Allen Wrench)
• Assembly Manual (This document)

4. Setup and Assembly

Assembly requires a screwdriver (not included) in addition to the provided Allen wrench.

1. Unpack Components: Carefully remove all items from the packaging. Place the tabletop upside down on a clean, soft, non-abrasive surface (e.g., a blanket or carpet) to protect its finish.
2. Identify Leg Attachment Points: Locate the pre-drilled holes on the underside of the tabletop where the legs will attach.
3. Attach Legs: For each leg, place one spring washer onto a screw, followed by one flat washer. Insert this assembly into the designated hole on the tabletop and align with a leg. Securely fasten each leg to the tabletop using the provided Allen wrench. Ensure all four legs are firmly attached.
4. Verify Stability: Once all legs are attached, carefully turn the table upright. Gently press down on the tabletop to ensure it is stable and does not wobble. Adjust the non-marking foot caps on the bottom of the legs if necessary to achieve a level surface.

5. Operating and Usage

The Modway Track 36-inch Round Dining Table is designed for indoor use as a dining or kitchen table. It comfortably seats 2-4 individuals.

• Place the table on a flat, stable surface.
• Distribute weight evenly across the tabletop to prevent tipping or damage.
• Avoid placing excessively hot items directly on the surface; use coasters or placemats.

6. Maintenance and Care

Proper care will extend the life and appearance of your dining table.

• Cleaning: The white laminate surface is designed for easy cleaning. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or polishes that may damage the finish.
• Leg Care: The solid beechwood legs can be wiped clean with a dry or slightly damp cloth. Avoid excessive moisture.
• Protection: Use placemats and coasters to protect the tabletop from scratches, heat, and moisture rings.
• Foot Caps: The non-marking foot caps help protect your flooring. Ensure they are clean and free of debris.

7. Troubleshooting

Table wobbles after assembly:

Ensure all leg attachment screws are fully tightened. Check if the floor is uneven; adjust the non-marking foot caps on the bottom of the legs to compensate for uneven surfaces.

Missing parts or hardware:

If any components are missing upon delivery, please contact Modway customer support immediately for assistance. Do not attempt to assemble the table with incomplete parts.

Surface smudges or fingerprints:

The white laminate surface may show smudges easily. Clean with a soft, damp cloth and a mild, non-abrasive cleaner. For stubborn marks, a glass cleaner or a diluted all-purpose cleaner can be used, followed by wiping dry.

8. Specifications

9. Warranty and Support

Manufacturer Warranty: This Modway product is covered by a one-year warranty against manufacturer defects from the date of purchase.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support: For warranty claims, missing parts, or any questions regarding your Modway Track Dining Table, please contact Modway customer support through their official website or the retailer where the product was purchased. Please have your model number (AMZ-1055-WHI) and proof of purchase available.