1. Product Overview
The Husqvarna Triple Lawn Mower Bagger is an attachment designed for 46-inch or 48-inch riding lawn mowers. This system efficiently collects grass clippings and leaves, featuring a 9-bushel (315-liter) capacity across three durable polyester mesh bins. It is engineered with improved airflow to ensure fuller bags and includes a full bag indicator for user convenience. The easy-glide bins are equipped with built-in handles for simple disposal of collected material.
Compatibility: This bagger is compatible with select Husqvarna riding mower models including YTH22V46, YTH24V48, TS 146X/XK/XD, and TS148X/XK, specifically those with stamped decks.
Figure 1.1: Compatible Husqvarna Tractor Models (TS 146XK, YTH22V46)
Figure 1.2: Husqvarna Triple Lawn Mower Bagger Assembly
2. Setup and Installation
Assembly of the Husqvarna Triple Lawn Mower Bagger typically requires minimal tools. Follow these steps for proper installation:
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list provided in your product manual. Note that some small hardware like screws and bolts may be included separately, even if instructions imply they are pre-installed on the tractor.
- Prepare Tractor: Ensure your riding mower is turned off, the engine is cool, and the spark plug wire is disconnected for safety.
- Install Mounting Bracket: Attach the main mounting bracket to the rear of your Husqvarna tractor. Some bolts may require extra effort to thread if paint has accumulated in the holes. Using a 1/2 inch or 13 mm socket can help to squarely start these bolts.
- Attach Bagger Unit: Slide the main bagger unit onto the drawbar that connects to the back of your mower.
- Connect Chute: Connect the grass collection chute from the mower deck discharge to the bagger unit. When attaching the chute to the mower deck, ensure the back spring is attached first, as these springs have strong tension.
- Secure Bags: Place the three polyester mesh collection bags into their respective compartments within the bagger housing.
- Final Checks: Ensure all connections are secure and the dome surrounding the bags is fully closed and latched to prevent debris from escaping during operation.
3. Operating Instructions
Proper operation of your Husqvarna Triple Lawn Mower Bagger ensures efficient grass and leaf collection.
- Optimal Conditions: For best results and to prevent clogging, operate the bagger when grass is dry and not excessively long. Mowing damp or wet grass significantly increases the likelihood of chute blockages.
- Full Bag Indicator: The bagger is equipped with a red spinning wheel indicator. This wheel will spin slowly as bags fill, then faster, and will eventually stop spinning when the bags are full. Empty the bags promptly when the indicator stops to prevent clogging of the chute. Continuing to mow after the indicator stops will likely result in a clogged chute.
- Emptying Bins: The easy-glide bins feature built-in handles. To empty, simply lift the bins out of the bagger housing and dispose of the clippings. The bags can also be used without lawn bags if preferred.
- Even Filling: If you notice one bag filling more quickly than others, you can adjust the position of the chute end slightly to direct clippings more evenly across the bins.
- Secure Dome: Always ensure the top dome cover of the bagger is fully closed and latched before and during operation. An improperly secured dome can lead to debris blowing out.
Figure 3.1: Full Bag Indicator Operation
Figure 3.2: Easy-Glide Bin for Disposal
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your bagger.
- Chute Cleaning: Periodically inspect and clean the collection chute. If mowing damp grass, clogs are more likely. The chute can often be disassembled at a central joining point for easier cleaning. Remove any remaining grass or debris to prevent future blockages.
- Bag Cleaning: The polyester mesh bags can be cleaned with water and mild soap. Ensure they are thoroughly dry before re-installation or storage to prevent mold or mildew.
- General Inspection: Regularly check all connections, bolts, and springs for tightness and wear. Replace any damaged components immediately.
- Storage: For winter or extended storage, the soft bags can collapse, allowing the unit to take up less space. The entire bagger unit can be easily removed from the tractor for storage.
5. Troubleshooting
Refer to the following common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chute Clogging Frequently | Mowing wet or damp grass; grass is too long; bags are full. | Mow only when grass is dry. Cut tall grass in multiple passes. Empty bags when the full bag indicator stops spinning. Clean the chute thoroughly. |
| Full Bag Indicator Not Working Accurately | Indicator mechanism is dirty or obstructed; bags are overfull. | Clean the indicator mechanism. Empty bags as soon as the indicator stops spinning to prevent overfilling and chute blockage. |
| One Bag Fills Faster Than Others | Uneven distribution of clippings from the chute. | Slightly adjust the end of the collection chute to direct clippings more evenly into all three bins. |
| Debris Blowing Out from Bagger | Bagger dome cover is not fully closed or latched; seals are damaged. | Ensure the dome cover is securely closed and latched. Inspect seals for damage and replace if necessary. |
6. Specifications
- Brand: Husqvarna
- Model Number: 960730037
- ASIN: B00I4OU1LC
- GTIN/UPC: 085388644305
- Style: 46-48 inch, 3-Bin
- Capacity: 9 Bushels (approximately 315 liters)
- Number of Bins: 3
- Material: Polyester (bags)
- Color: Black
- Item Weight: 62 Pounds
- Assembly Required: Yes
- Compatible Mower Deck Sizes: 46-inch or 48-inch
- Compatible Husqvarna Models: YTH22V46, YTH24V48, TS 146X/XK/XD, TS148X/XK (with stamped decks)
Figure 6.1: 9-Bushel Capacity Overview
7. Warranty Information
This Husqvarna Triple Lawn Mower Bagger comes with a manufacturer's warranty of 90 days from the date of purchase. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the warranty documentation included with your product or contact Husqvarna customer support.
8. Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Husqvarna customer service. Visit the official Husqvarna website for contact details and additional resources.