Hobart N50-60

Hobart N50-60 Commercial Planetary Stand Mixer User Manual

Model: N50-60

1. Introduction

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Hobart N50-60 5-Quart Commercial Countertop Planetary Stand Mixer. Designed for heavy-duty commercial use, this mixer features a robust gear-driven transmission and three fixed speeds, making it suitable for a wide range of mixing applications. Please read this manual thoroughly before operating the mixer.

Hobart N50-60 Commercial Planetary Stand Mixer

Figure 1: Hobart N50-60 Commercial Planetary Stand Mixer. This image shows the complete mixer unit with the stainless steel bowl and a whisk attachment.

2. Safety Instructions

WARNING: To reduce the risk of serious injury, always follow these safety precautions.

  • Read all instructions before operating the mixer.
  • Ensure the mixer is placed on a stable, level, and dry surface to prevent tipping.
  • Always unplug the mixer from the electrical outlet before cleaning, assembling, disassembling parts, or performing any maintenance.
  • Keep hands, hair, clothing, and utensils away from moving parts during operation to prevent injury. Never use your hands to scrape the bowl while the mixer is running.
  • Do not immerse the mixer base in water or other liquids. Clean with a damp cloth only.
  • Use only attachments and accessories recommended by the manufacturer.
  • Do not operate the mixer with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact qualified service personnel.
  • Close supervision is necessary when any appliance is used by or near children.
  • Ensure the power supply matches the voltage specified on the mixer's rating label (100-120V/2.9A or 230V/1.4A).
  • Never attempt to bypass safety interlocks or modify the mixer.
Rear view of Hobart N50-60 mixer showing power cord and warning label

Figure 2: Rear view of the mixer, highlighting the power cord connection and a warning label. Always ensure the power cord is in good condition and properly connected.

3. Package Contents

Verify that all items are present in the package:

  • Hobart N50-60 Planetary Stand Mixer Unit
  • 5-Quart Stainless Steel Mixing Bowl
  • "D" Wire Whip (Balloon-shaped)
  • "B" Flat Beater (Cast Aluminum)
  • "ED" Dough Hook (Cast Aluminum)

4. Setup

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
  2. Placement: Position the mixer on a sturdy, level, and dry countertop or work surface capable of supporting its weight (approximately 55 lbs). Ensure adequate clearance around the mixer for ventilation and operation.
  3. Bowl Installation:
    • Lower the bowl support by pulling the hand lever located on the side of the mixer downwards.
    • Place the 5-quart stainless steel mixing bowl onto the bowl support, aligning the pins on the support with the slots on the bowl.
    • Raise the bowl support by pushing the hand lever upwards until it locks securely into place.
  4. Attachment Installation:
    • Ensure the mixer is OFF and unplugged.
    • Slide the desired attachment (wire whip, flat beater, or dough hook) onto the agitator shaft until it clicks into place. Rotate the attachment slightly if needed to engage the pin.
    • Gently pull down on the attachment to ensure it is securely locked.
  5. Power Connection: Plug the mixer's power cord into a grounded electrical outlet that matches the mixer's voltage requirements.
Front view of Hobart N50-60 mixer with whisk attachment and bowl

Figure 3: Front view of the mixer with the whisk attachment and stainless steel bowl correctly installed. Note the bowl lift lever on the right side.

Close-up of Hobart N50-60 mixer bowl and whisk attachment

Figure 4: Close-up view of the 5-quart stainless steel bowl and the whisk attachment, showing how they connect to the mixer head.

5. Operating Instructions

  1. Add Ingredients: With the mixer OFF and the bowl in the raised position, add your ingredients to the 5-quart stainless steel mixing bowl.
  2. Select Speed: The N50-60 features a three-speed transmission. Use the speed selector lever (typically labeled 1, 2, 3) to choose the desired mixing speed. It is generally recommended to start at a lower speed and gradually increase as needed.
  3. Start Mixer: Press the large ON button to start the mixer.
  4. Monitor Mixing: Observe the mixing process. If necessary, stop the mixer, scrape down the sides of the bowl, and restart.
  5. Stop Mixer: Press the large OFF button to stop the mixer.
  6. Remove Bowl and Attachment: Once mixing is complete, ensure the mixer is OFF. Lower the bowl support using the hand lever. Carefully remove the attachment by pushing it upwards and then sliding it off the agitator shaft. Then, remove the mixing bowl.
  7. Manual Reset Switch: In case of an overload or electrical issue, the mixer may automatically shut off. Locate the manual reset switch (often a small button on the mixer body) and press it to reset the circuit. If the issue persists, unplug the mixer and contact service.
Side view of Hobart N50-60 mixer showing speed selector and ON/OFF switch

Figure 5: Side view of the mixer, illustrating the location of the speed selector lever (1, 2, 3) and the prominent ON/OFF buttons for easy operation.

6. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hobart N50-60 mixer.

6.1 Daily Cleaning

  • Always unplug the mixer before cleaning.
  • Mixing Bowl and Attachments: The 5-quart stainless steel mixing bowl and the included attachments (wire whip, flat beater, dough hook) are dishwasher safe. Alternatively, wash them with warm, soapy water, rinse thoroughly, and dry immediately.
  • Mixer Body: Wipe down the exterior of the mixer with a damp cloth. For stubborn stains, use a mild detergent. Avoid abrasive cleaners or scouring pads, as these can damage the Hobart gray hybrid powder enamel finish. Ensure no water enters the motor housing or electrical components.
  • Attachment Hub: Clean the attachment hub area to prevent food buildup.

6.2 General Maintenance

  • Periodically inspect the power cord for any signs of damage. If damaged, it must be replaced by a qualified technician.
  • Ensure all moving parts operate smoothly. Do not attempt to lubricate internal components unless specified by the manufacturer.
  • Keep the mixer in a clean, dry environment when not in use.

7. Troubleshooting

This section addresses common issues you might encounter with your Hobart N50-60 mixer.

Problem Possible Cause Solution
Mixer does not turn on.
  • Not plugged in.
  • Power outlet not functioning.
  • Manual reset switch tripped.
  • Internal electrical fault.
  • Ensure power cord is securely plugged into a working outlet.
  • Test the outlet with another appliance.
  • Press the manual reset switch.
  • If problem persists, unplug and contact service.
Mixer stops during operation.
  • Overload (too much dough/heavy mixture).
  • Manual reset switch tripped.
  • Power interruption.
  • Reduce load or mixture consistency.
  • Press the manual reset switch.
  • Check power supply.
Attachments are difficult to install/remove.
  • Food residue buildup.
  • Incorrect alignment.
  • Clean the agitator shaft and attachment hub thoroughly.
  • Ensure attachment is correctly aligned with the pin on the shaft.
Unusual noise or vibration.
  • Mixer not on a level surface.
  • Attachment not properly secured.
  • Internal mechanical issue.
  • Ensure mixer is on a stable, level surface.
  • Verify attachment is securely locked.
  • Unplug and contact service if noise persists.

8. Specifications

Feature Detail
Model Name N50-60
Brand Hobart
Capacity 5 Quarts
Product Dimensions (D x W x H) 15"D x 11"W x 17"H
Material Aluminum, Stainless Steel
Color Gray (Hybrid Powder Enamel Finish)
Number of Speeds 3 Fixed Speeds
Voltage 100-120 Volts / 230 Volts
Wattage 348 watts
Controls Type Button (On/Off), Toggle (Speed)
Container Material Stainless Steel
Dishwasher Safe (Bowl) Yes
Included Components Mixer, 5-Qt Bowl, Wire Whip, Flat Beater, Dough Hook
Certifications UL listed, NSF certified
Dimensions diagram for Hobart N50-60 mixer

Figure 6: Dimensional diagram of the Hobart N50-60 mixer, showing its height (17"), width (11"), and depth (15").

9. Warranty Information

Warranty details for the Hobart N50-60 Commercial Planetary Stand Mixer are typically provided with your purchase documentation or can be obtained directly from the manufacturer's official website. Please retain your proof of purchase for warranty claims.

10. Support

For technical assistance, spare parts, or service inquiries, please contact Hobart customer support. You can typically find contact information on the official Hobart website or through your authorized dealer.

Visit the official Hobart Store for more information: Hobart Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.