Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your Schonbek La Scala Chandelier Model 5073-26. Please read all instructions carefully before proceeding with installation or use. Retain this manual for future reference.
Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about wiring procedures.
- Ensure the mounting surface can support the weight of the fixture.
- Do not connect this fixture to an ungrounded electrical system.
- Handle crystals with care to prevent damage or injury.
- This fixture is rated for indoor use only.
Package Contents
Verify that all components are present before beginning installation:
- Lighting Fixture (Chandelier frame)
- Mounting Hardware (Canopy, chain, screws, wire nuts)
- Instruction Sheets
- Certificate of Authenticity
- Manufacturer Warranty Certificate
- Crystal Components (Drops, rosettes, bobeches)
Setup and Installation
1. Pre-Installation
- Turn off power at the main circuit breaker or fuse box.
- Unpack all components carefully and inspect for any damage.
- Gather necessary tools: screwdriver, wire strippers, pliers, ladder, safety glasses.
2. Mounting the Fixture
The chandelier mounts to a standard electrical box. It is suspended from a canopy using 80 inches of included chain in a matching finish. The chain length can be adjusted during installation. The fixture includes 180 inches of total wire for a maximum suspension up to 213 inches with additional chain (sold separately). This fixture can be installed on a sloped ceiling up to a 45-degree angle.
- Secure the mounting bracket to the electrical box.
- Attach the chain to the fixture loop and the canopy loop, adjusting to the desired height.
- Thread the electrical wires through the chain and canopy.
- Connect the fixture's black wire to the supply's black wire, the fixture's white wire to the supply's white wire, and the fixture's ground wire to the supply's ground wire using wire nuts.
- Carefully tuck wires into the electrical box and secure the canopy to the mounting bracket.
Figure 1: An overview of the Schonbek La Scala chandelier, showcasing its French Gold finish and clear Heritage Handcut Crystals.
3. Crystal Assembly
The chandelier is adorned with crystal drops and rosettes. Attach the Heritage Handcut Crystals according to the provided diagram in the separate instruction sheets. Ensure each crystal is securely fastened.
Figure 2: Detailed view of the precisely cut Heritage crystals, highlighting their facets and clarity.
Figure 3: A closer look at the crystal drops and bobeches, demonstrating the intricate design and quality.
Operating Instructions
- After installation is complete and verified, restore power at the circuit breaker.
- The chandelier requires 8 x E12 base, B10 shape 120V light bulbs (60W maximum incandescent or LED, sold separately).
- For dimming functionality, use a compatible dimmer switch (sold separately) for smooth and continuous dimming.
Figure 4: The Schonbek La Scala chandelier illuminating a bedroom, demonstrating its scale and aesthetic impact within a living space.
Maintenance
Cleaning the Fixture
- Always turn off power to the fixture before cleaning.
- For the metal frame, use a soft, dry cloth to gently wipe away dust. Avoid abrasive cleaners or solvents, as they may damage the finish.
- For the crystals, use a soft, lint-free cloth dampened with distilled water or a specialized crystal cleaner. Gently wipe each crystal to remove dust and fingerprints. Do not spray cleaner directly onto the fixture.
- Regular cleaning will maintain the chandelier's brilliance and appearance.
Troubleshooting
If your chandelier is not functioning as expected, refer to the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty bulb | Check circuit breaker. Verify all wire connections are secure (with power off). Replace bulb(s). |
| Lights flicker | Loose bulb Incompatible dimmer Loose wiring | Tighten bulbs. Ensure dimmer is compatible with LED/incandescent bulbs. Check wiring connections (with power off). |
| Crystals appear dull | Dust or residue buildup | Clean crystals as per maintenance instructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5073-26 |
| Brand | Schonbek |
| Style | La Scala, Clear Heritage Handcut Crystals |
| Color/Finish | French Gold |
| Material | Alloy Steel, Crystal |
| Product Dimensions | 25"L x 25"W x 28.5"H |
| Item Weight | 27 Pounds |
| Number of Lights | 8 |
| Bulb Base | E12 |
| Max Wattage (per bulb) | 60W (Incandescent or LED equivalent) |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor use only |
| Assembly Required | Yes |
| Mounting Type | Single Circuit, Chain Suspended |
| Slope Ceiling Compatible | Up to 45 degrees |
| Standards | UL, cUL, CSA rated |
| UPC | 771857211153 |
Warranty and Support
Warranty Information
This Schonbek La Scala Chandelier is covered by a 5-year manufacturer's warranty. Please refer to the included Manufacturer Warranty Certificate for specific terms and conditions.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Schonbek customer service. Contact information can typically be found on the manufacturer's website or on the warranty certificate.
