Vigor G-900 2T
Vigor G-900 2T 650W Generator User Manual
Model: G-900 2T | Brand: Vigor
Introduction
This manual provides essential information for the safe and efficient operation of your Vigor G-900 2T 650W portable generator. Please read these instructions carefully before use to ensure proper handling, maintenance, and to prevent injury or damage.
Safety Information
Always operate the generator in a well-ventilated outdoor area. Do not operate indoors. Keep children and pets away from the generator during operation. Fuel is highly flammable; handle with extreme care. Ensure the generator is off and cooled before refueling or performing maintenance.
Product Overview and Components
Familiarize yourself with the main components of your Vigor G-900 2T generator.

Image: Vigor G-900 2T Generator showing overall dimensions. The generator features a yellow and black casing with a top handle, fuel cap, control panel, and exhaust. Dimensions are approximately 37.5cm (length), 33.5cm (width), and 32.5cm (height).
- Fuel Tank Cap: For adding fuel mixture.
- Control Panel: Includes power outlets and switches.
- Pull Start Handle: For manual engine starting.
- Exhaust: Vents engine fumes.
- Air Filter Cover: Protects the air filter.
- Spark Plug: Essential for engine ignition.
- 12V-7A Battery Charger Output: For charging external 12V batteries.
- 230V AC Outlets: For connecting electrical devices.
Setup and First Use
- Unpacking: Carefully remove the generator from its packaging. Inspect for any shipping damage.
- Placement: Place the generator on a firm, level surface in a well-ventilated outdoor area, away from combustible materials.
- Fuel Mixture Preparation: This generator uses a 2-stroke engine. It requires a specific gasoline-oil mixture.
- Mixture Ratio: 50:1 (50 parts gasoline to 1 part 2-stroke engine oil).
- Fuel Type: Use unleaded gasoline.
- Oil Type: Use high-quality 2-stroke engine oil.
- Mixing: Mix the fuel and oil thoroughly in a separate, approved fuel container before pouring into the generator's fuel tank.
- Add Fuel: Open the fuel tank cap and carefully pour the prepared fuel mixture into the tank. Do not overfill. Securely close the fuel cap. The fuel tank capacity is 1.5 liters.
- Check Connections: Ensure all electrical connections are secure and free from damage.
Operating Instructions
Starting the Generator
- Ensure the generator is on a level surface and all connected devices are switched off or unplugged.
- Open the fuel valve (if applicable).
- Set the choke lever to the "START" or "CHOKE" position (cold engine).
- Turn the engine switch to the "ON" position.
- Grasp the pull start handle firmly and pull it slowly until resistance is felt, then pull quickly and smoothly to start the engine. Repeat if necessary.
- Once the engine starts, gradually move the choke lever to the "RUN" position as the engine warms up.
- Allow the generator to run for a few minutes before connecting any electrical loads.
Connecting Electrical Devices
- Plug your 230V AC devices into the generator's outlets.
- For 12V battery charging, connect the 12V-7A battery charger cable to the appropriate output and to your battery.
- Do not overload the generator. The maximum continuous output is 650 Watts.
Stopping the Generator
- Disconnect all electrical loads from the generator.
- Allow the generator to run for a few minutes without load to cool down.
- Turn the engine switch to the "OFF" position.
- Close the fuel valve (if applicable) for storage.
Maintenance
Regular maintenance ensures the longevity and reliable operation of your generator. Always ensure the generator is off and cooled before performing any maintenance.
- Air Filter: Check and clean the air filter regularly, especially in dusty conditions. Replace if damaged.
- Spark Plug: Inspect the spark plug periodically. Clean or replace if fouled or worn.
- Fuel System: If storing the generator for an extended period, drain the fuel tank and carburetor to prevent fuel degradation and clogging.
- General Cleaning: Keep the generator clean and free of debris. Wipe down the exterior with a damp cloth.
- Storage: Store the generator in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel or incorrect fuel mixture Engine switch OFF Choke not set correctly Spark plug fouled or faulty | Add correct fuel mixture Turn engine switch to ON Adjust choke Clean or replace spark plug |
| Low power output | Overload Dirty air filter Incorrect fuel mixture | Reduce electrical load Clean air filter Ensure correct 50:1 fuel-oil mixture |
| Engine stops during operation | Out of fuel Overheating Faulty spark plug | Refuel Allow to cool, check ventilation Check/replace spark plug |
If problems persist after attempting these solutions, please contact qualified service personnel.
Technical Specifications
| Model | G-900 2T |
| Brand | Vigor |
| Engine Type | 2-stroke |
| Engine Displacement | 63 cc |
| Fuel Type | Gasoline (50:1 gasoline-oil mixture) |
| Fuel Tank Volume | 1.5 Liters |
| Rated Output Power | 650 Watts |
| Peak Output Power | 650 Watts |
| Voltage | 220V / 230V AC |
| Frequency | 50 Hz |
| Current Rating | 2.83 A |
| Total Electrical Outlets | 2 |
| DC Output | 12V-7A (Battery Charger) |
| Run Time (at rated load) | Approximately 1 hour |
| Dimensions (L x W x H) | 37 cm x 35 cm x 42 cm |
| Weight | 17 kg |
| Material | Aluminum |
| Recommended Use | Camping |
Warranty Information
Specific warranty details are not provided in the product information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, spare parts, or service inquiries, please contact your authorized Vigor dealer or the retailer where the product was purchased. Provide your model number (G-900 2T) and purchase date when contacting support.
Manufacturer: Viglietta Group
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

