TC Electronic DITTO X2 LOOPER Pedal Instruction Manual

1. Introduction and Overview

The TC Electronic DITTO X2 LOOPER is a highly intuitive looper pedal designed for guitarists, offering a dedicated stop button and versatile loop effects. This manual provides comprehensive instructions for setting up, operating, and maintaining your DITTO X2 LOOPER pedal.

Key Features:

• Dedicated Start/Stop Button
• Loop Import/Export and Backing tracks
• Looper effects: Stop, Reverse and Half Speed

2. Product Components and Controls

Familiarize yourself with the layout of your DITTO X2 LOOPER pedal:

Image: Top view of the DITTO X2 LOOPER pedal, highlighting the Loop Level knob, Loop footswitch, FX footswitch, and FX/Store toggle switches.

• Loop Level Knob: Controls the playback volume of your recorded loops.
• Loop Footswitch: Primary control for recording, playback, overdubbing, and clearing loops.
• FX Footswitch: Activates/deactivates selected loop effects (Reverse, Half Speed, Stop).
• FX Toggle Switch: Selects the function of the FX footswitch: Reverse, Half Speed, or dedicated Stop.
• Store Toggle Switch: Used for storing and deleting backing tracks.

Image: Rear view of the DITTO X2 LOOPER pedal, showing the Mono/Stereo Input and Output jacks, 9V DC power input, and Mini-USB port.

• Input Jacks (Mono/Stereo): Connect your instrument(s) here.
• Output Jacks (Mono/Stereo): Connect to your amplifier or audio interface.
• 9V DC Power Input: Connect a 9V DC power adapter (100mA minimum, center negative).
• Mini-USB Port: Used for connecting to a computer for loop import/export and firmware updates.

3. Setup

1. Power Connection: Connect a 9V DC power adapter (not included) to the 9V DC input jack on the rear of the pedal. The pedal does not support battery operation.
2. Audio Connections:
   • Connect your instrument (e.g., guitar) to the INPUT jack(s). For mono, use the MONO input. For stereo, use both STEREO inputs.
   • Connect the OUTPUT jack(s) to your amplifier or audio interface. For mono, use the MONO output. For stereo, use both STEREO outputs.
3. Initial Settings: Set the Loop Level knob to a comfortable starting position (e.g., 12 o'clock).

4. Operating Instructions

The DITTO X2 LOOPER offers intuitive operation for creating and manipulating loops.

4.1 Basic Looping Functions

• Record: Press the LOOP footswitch once. The LED will turn RED, indicating recording has started.
• Playback: Press the LOOP footswitch again to stop recording and start playback. The LED will turn GREEN.
• Overdub: During playback, press the LOOP footswitch once to start overdubbing. The LED will turn RED. Press again to stop overdubbing and return to playback (GREEN LED).
• Undo/Redo Overdub: During playback, hold the LOOP footswitch to undo the last overdub. Hold again to redo it.
• Stop:
  • If the FX toggle switch is set to 'STOP', press the FX footswitch once.
  • Alternatively, double-tap the LOOP footswitch. The GREEN LED will flash.
• Clear Loop: Double-tap and hold the LOOP footswitch. The loop will be deleted.

4.2 Loop Effects (Reverse, Half Speed, Stop)

The DITTO X2 offers creative effects to enhance your loops:

• Select Effect: Use the FX toggle switch to choose between 'REVERSE', '1/2 SPEED', or 'STOP'.
• Activate/Deactivate Effect: Press the FX footswitch once to activate the selected effect. Press again to deactivate it. The FX LED will indicate activation.

4.3 Backing Tracks

The DITTO X2 allows you to import and export backing tracks for practice or performance:

• Import/Export: Connect the pedal to your computer via the Mini-USB port. The pedal will appear as a removable drive, allowing you to drag and drop audio files (WAV format recommended).
• Store/Delete Backing Track: Use the 'STORE' toggle switch to manage your backing tracks. Refer to the official TC Electronic software for detailed management.

4.4 Video Demonstration

Watch this official video for a visual guide on the DITTO X2 LOOPER's functionality:

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the pedal. Avoid abrasive cleaners or solvents.
• Storage: Store the pedal in a dry environment away from extreme temperatures.
• Firmware Updates: Periodically check the TC Electronic website for any available firmware updates for your DITTO X2 LOOPER. Updates can be installed via the Mini-USB port.

6. Troubleshooting

• No Sound:
  • Ensure all cables are securely connected.
  • Check the Loop Level knob is not set to minimum.
  • Verify power supply is correctly connected and functional.
• LED Not Lighting Up:
  • Confirm the power adapter is working and correctly connected.
• Loop Not Recording/Playing Back:
  • Ensure the input signal is present.
  • Check that the correct footswitch actions are being performed for record/playback.

7. Specifications

• Item Weight: 0.635 ounces (18 Grams)
• Product Dimensions: 6 x 7 x 3 inches
• Item Model Number: 000-DE800-00010
• Batteries: 1 9V batteries required (for internal dip switch access, not primary power).
• Hardware Interface: USB
• Signal Format: Analog
• Voltage: 9V
• Amperage: 0.1 Milliamps (100mA)
• First Available: January 16, 2014

8. What's in the Box

• TC Electronic DITTO X2 LOOPER, Highly Intuitive Looper Pedal with Dedicated Stop Button and Loop Effects

9. Warranty and Support

This product is covered by the manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official TC Electronic website or contact their customer support directly. Keep your purchase receipt for warranty claims.