1. Introduction
Thank you for choosing the Orbegozo TW 0745 Oscillating Tower Fan. This manual provides essential information for the safe and efficient operation of your new fan. Please read these instructions carefully before use and keep them for future reference.
The Orbegozo TW 0745 is designed to provide effective cooling with its 45W power, three speed settings, and oscillating movement. Its silent operation and convenient 2-hour timer make it ideal for various room environments.
2. Safety Instructions
- Always ensure the voltage indicated on the rating label corresponds to your mains voltage.
- Do not immerse the fan, plug, or cord in water or other liquids.
- Unplug the fan from the power outlet when not in use, before cleaning, or before moving.
- Keep the fan out of reach of children and pets.
- Do not insert any objects into the fan grilles.
- Do not operate the fan with a damaged cord or plug. Contact qualified service personnel for repair.
- Place the fan on a stable, flat surface to prevent it from tipping over.
- Do not use the fan near curtains, drapes, or other objects that could be drawn into the fan.
- This appliance is for indoor use only.
3. Product Overview
Figure 1: Orbegozo TW 0745 Tower Fan. This image shows the tall, slender white tower fan with a round base. The control panel with buttons is visible on the top surface of the fan.
Components:
- Tower Body: The main vertical structure of the fan.
- Base: Provides stability for the fan.
- Control Panel: Located on top of the fan, with buttons for operation.
- Air Outlet Grille: Vertical slats on the front of the tower where air is expelled.
- Carry Handle: Integrated into the back of the tower for easy transport.
4. Setup
The Orbegozo TW 0745 tower fan typically comes pre-assembled. If the base is detached, follow these steps:
- Carefully remove all packaging materials.
- Place the tower body upright.
- Align the base with the bottom of the tower body. Ensure the notches and grooves match.
- Secure the base to the tower body using the provided screws (if any) and a screwdriver. Ensure it is firmly attached and stable.
- Place the fan on a firm, level surface.
- Plug the power cord into a standard 230V, 50Hz electrical outlet.
5. Operating Instructions
The control panel is located on the top of the fan. Refer to the buttons on the control panel for the following functions:
Power On/Off:
- Press the Power button (often marked with I/O or a power symbol) to turn the fan on.
- Press the Power button again to turn the fan off.
Speed Selection:
The fan has 3 speed settings: Low, Medium, and High.
- Press the Speed button (often marked with +/- or fan blade symbols) repeatedly to cycle through the available speeds.
- Select the desired airflow intensity.
Oscillation Function:
The oscillation feature allows the fan to rotate from side to side, distributing air over a wider area.
- Press the Oscillation button (often marked with an arrow icon rotating left and right) to activate the oscillating movement.
- Press the button again to stop the oscillation at the desired direction.
Timer Function:
The fan features a 2-hour timer, allowing you to set it to automatically turn off after a specified period.
- Press the Timer button (often marked with a clock icon) repeatedly to set the desired operating time.
- Each press typically adds a specific time increment (e.g., 30 minutes or 1 hour) up to a maximum of 2 hours.
- The fan will automatically turn off once the set time has elapsed.
6. Maintenance
Regular cleaning will help maintain the fan's performance and extend its lifespan.
Cleaning:
- Always unplug the fan from the power outlet before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- For dust accumulation on the grilles, use a vacuum cleaner with a brush attachment or compressed air to gently remove dust.
- Ensure the fan is completely dry before plugging it back in and operating it.
Storage:
- If storing the fan for an extended period, clean it thoroughly.
- Store it in its original packaging or a suitable box in a cool, dry place.
7. Troubleshooting
If you encounter issues with your Orbegozo TW 0745 fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Power button not pressed. | Check if the plug is securely inserted into the outlet. Ensure the outlet is functional. Press the Power button firmly. |
| Weak airflow. | Fan speed set too low. Grilles are blocked by dust. | Increase the fan speed setting. Clean the air inlet and outlet grilles. |
| Fan is making unusual noise. | Fan not on a level surface. Internal obstruction. | Place the fan on a stable, flat surface. Unplug the fan and check for any visible obstructions in the grilles. Do not attempt to disassemble. |
| Oscillation not working. | Oscillation button not pressed. | Press the Oscillation button to activate the function. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Orbegozo |
| Model Number | TW 0745 |
| Color | White |
| Product Dimensions (L x W x H) | 16 x 22.5 x 77 cm |
| Item Weight | 3.31 Kilograms |
| Power | 45 Watts |
| Voltage | 230 Volts |
| Material | Plastic |
| Number of Speeds | 3 |
| Energy Class | A |
| Special Feature | Timer function, Oscillating movement, Carry handle |
| Power Source | Electric Cord |
| Recommended Uses | Ventilation |
9. Warranty and Support
Orbegozo products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or spare parts, please refer to the warranty card included with your purchase or visit the official Orbegozo website. Keep your proof of purchase for any warranty claims.
