Introduction
Thank you for choosing the Ansmann Agent 1 Focus LED Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
The Ansmann Agent 1 Focus is a high-performance LED flashlight featuring a 3W CREE LED, designed for strong, consistent illumination. Its robust aircraft-grade aluminum housing ensures durability and resistance to splashes (IP54) and impacts, making it suitable for various environments.
Safety Instructions
- Do not look directly into the LED beam. The intense light can cause temporary vision impairment or eye damage.
- Keep the flashlight out of reach of children.
- Do not attempt to disassemble or modify the flashlight. This may void the warranty and pose safety risks.
- Ensure batteries are inserted with correct polarity. Incorrect insertion can damage the device or cause battery leakage.
- Remove batteries if the flashlight will not be used for an extended period to prevent leakage and damage.
- Dispose of used batteries according to local regulations. Do not incinerate batteries.
- Avoid exposing the flashlight to extreme temperatures or direct sunlight for prolonged periods.
Package Contents
Verify that all items are present in the package:
- Ansmann Agent 1 Focus LED Flashlight
- 2 x AAA Batteries (pre-installed or included separately)
- Belt Clip
- Hand Strap
- User Manual (this document)
Setup
Battery Installation
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert two AAA batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align with the markings inside the flashlight.
- Screw the tail cap back on clockwise until it is securely tightened. Do not overtighten.
Operating Instructions
Power On/Off
To turn the flashlight on or off, firmly press the tactical switch located on the tail cap. A full press will toggle the power.
Focus Adjustment
The Ansmann Agent 1 Focus features a smooth, one-handed focus adjustment mechanism. To adjust the beam from a wide floodlight to a narrow spotlight, simply slide the head of the flashlight forward or backward. This allows for precise control over the light distribution.
Morse Function
With the flashlight turned on, a half-press of the tactical switch will momentarily activate the light. This allows for signaling using Morse code or for quick, temporary illumination.
Maintenance
Cleaning
- Wipe the flashlight's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Keep the lens clean for optimal light output. Use a lens cleaning cloth if necessary.
Battery Replacement
When the light output diminishes, replace both AAA batteries following the installation steps outlined in the "Battery Installation" section. Always replace both batteries simultaneously with new ones of the same type.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. |
|
|
| Light output is dim or flickers. |
|
|
| Focus mechanism is stiff. |
|
|
Specifications
| Model Number | 1600-0052 |
| Light Source | 3W CREE LED |
| Brightness | 160 Lumens / 6500 Lux |
| Beam Distance | 125 meters (ANSI FL 1) |
| Operating Time | Approximately 7 hours |
| Power Source | 2 x AAA Batteries (included) |
| Material | Aircraft-grade Aluminum |
| Ingress Protection (IP) Rating | IP54 (Splashproof) |
| Dimensions (L x D) | 131 x 31 mm (5.16 x 1.22 inches) |
| Weight | 170 g (6 ounces) |
Warranty and Support
Ansmann products are manufactured with quality and reliability in mind. For information regarding warranty coverage, technical support, or service, please refer to the official Ansmann website or contact their customer service department. Keep your purchase receipt as proof of purchase.
A customer review mentions a 5-year warranty. Please verify the exact warranty terms with the manufacturer or your retailer at the time of purchase.
For further assistance, you may visit the Ansmann Store on Amazon.
