1. Introduction
This manual provides essential information for the safe and efficient operation of your Tannoy Reveal 802 8-inch Powered Studio Monitor. The Reveal 802 is a reference monitor designed for personal studio monitoring, offering active 2-way amplification with an 8-inch woofer and a 1-inch tweeter.
Please read this manual thoroughly before using the product and retain it for future reference.
2. Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or damage to the unit.
- Power Source: Connect the unit only to the specified power supply voltage.
- Ventilation: Ensure adequate ventilation around the unit. Do not block ventilation openings.
- Water and Moisture: Do not expose the unit to rain or moisture. Do not place objects filled with liquids on the unit.
- Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
- Cleaning: Unplug the unit from the power outlet before cleaning. Use a dry cloth only.
3. Package Contents
Verify that all items are present and in good condition upon unpacking.
- Tannoy Reveal 802 Studio Monitor Unit
- Power Cable
- User Manual (this document)
4. Product Features
The Tannoy Reveal 802 is engineered to deliver accurate sound reproduction for studio environments.
- Active 2-way Studio Reference Monitor with 8-inch Woofer
- 1-inch Tweeter for clear high-frequency response
- Front-firing Bass Port for optimized low-frequency performance
- Bi-amplification for efficient power delivery to individual drivers
- Connectivity options: XLR, 1/4 inch Jack, and 1/8 inch TRS Aux Input
- Compatible with various devices including smartphones, tablets, MP3 players, desktops, and laptops.
5. Setup
Follow these steps to properly set up your studio monitor.
- Placement: Position the monitors on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position. Ensure the front-firing bass port is not obstructed.
- Power Connection: Connect the provided power cable to the monitor's power input and then to a suitable AC power outlet.
- Audio Connection:
- For professional audio equipment, use an XLR or 1/4 inch Jack cable to connect your audio interface or mixer to the monitor's input.
- For consumer devices like smartphones or laptops, use a 1/8 inch TRS Aux cable to connect to the monitor's auxiliary input.
- Initial Power On: Ensure the volume control on the monitor is set to a minimum before powering on your audio source and the monitor. Power on the monitor, then your audio source.
6. Operating
This section details the basic operation of your Tannoy Reveal 802 monitor.
6.1 Volume Control
The monitor features a volume control knob, typically located on the front or rear panel. Rotate clockwise to increase volume and counter-clockwise to decrease. Always adjust volume gradually to avoid sudden loud sounds.
6.2 Input Selection (if applicable)
If your monitor has multiple input options and a selector, ensure the correct input is chosen to match your audio source. Refer to the rear panel for input labels.
6.3 Power On/Off
The power switch is usually located on the rear panel. It is recommended to power off the monitors when not in use for extended periods.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your monitor.
- Cleaning: Use a soft, dry cloth to clean the exterior of the monitor. Do not use liquid cleaners or aerosols.
- Dust: Regularly dust the speaker cones and ports to prevent accumulation, which can affect sound quality.
- Environment: Avoid exposing the monitor to extreme temperatures, humidity, or direct sunlight.
- Transportation: When moving the monitor, ensure it is powered off and disconnected from all cables. Use original packaging if available for protection.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound |
|
|
| Distorted sound |
|
|
| Humming or buzzing noise |
|
|
If the problem persists after trying these solutions, please contact customer support.
9. Specifications
Detailed technical specifications for the Tannoy Reveal 802 Studio Monitor.
| Model Name | REVEAL 802 |
| Speaker Type | Monitor |
| Special Feature | Bi amplification |
| Woofer Diameter | 8 Inches |
| Tweeter Diameter | 25 Millimeters (1 Inch) |
| Speaker Amplification Type | Active |
| Output Wattage | 140 Watts |
| Connectivity Technology | XLR, 1/4 inch Jack, Mini Jack (1/8" TRS Aux Input) |
| Audio Output Mode | Stereo |
| Product Dimensions (D x W x H) | 11.81"D x 9.96"W x 15.35"H |
| Item Weight | 26.01 Pounds |
| Power Source | Corded Electric |
| Color | Black |
10. Warranty Information
The Tannoy Reveal 802 Studio Monitor comes with a Lifetime Warranty. This warranty covers manufacturing defects and ensures the product's quality and performance under normal use.
For specific terms and conditions, please refer to the official Tannoy warranty documentation or contact customer support.
11. Support
For further assistance, technical support, or warranty claims, please contact Tannoy customer service.
- Online Resources: An official User Manual (PDF) is available for download here.
- Manufacturer Website: Visit the official Tannoy website for product registration, FAQs, and contact information.
