Product Overview
The Connex Hexagon Bolts M10 x 110 mm set is designed for stable and heavy-duty constructions. This assortment includes all necessary components for secure fastening: hexagon head screws, body washers, spring rings, and hex nuts. These galvanized fasteners offer excellent corrosion protection and high strength under both tensile and compressive loads, making them suitable for a wide range of construction applications, including the attachment of impact ground sleeves and post supports.
Image: A clear plastic bag containing ten M10 x 110 mm galvanized hexagon bolts, ten body washers, ten spring washers, and ten hex nuts. The product label is visible, indicating size and quantity.
Package Contents
Each package of Connex Hexagon Bolts M10 x 110 mm (Model B30019) contains the following components:
- 10 x Galvanized Hexagon Screws (M10 x 110 mm)
- 10 x Body Washers
- 10 x Spring Rings
- 10 x Hex Nuts
Image: A detailed view of the individual components included in the set. From left to right: a single M10 x 110 mm hexagon bolt, a body washer, a spring washer, and a hex nut.
Setup and Installation
These hexagon bolts are designed for robust fastening in various construction scenarios. Their primary application includes securing structural elements where high strength and stability are required.
Typical Applications:
- Attaching impact ground sleeves.
- Securing post supports.
- General construction where strong, galvanized fasteners are needed.
Installation Steps:
- Preparation: Ensure the surfaces to be joined are clean and free from obstructions. Drill pilot holes of appropriate diameter if necessary, considering the M10 bolt size.
- Assembly: Insert the hexagon bolt through the components to be fastened. Place a body washer first, followed by a spring washer, and then thread the hex nut onto the bolt.
- Tightening: Use a suitable wrench or socket for the hexagonal head and nut. Tighten the assembly firmly to ensure a secure connection. The hexagonal drive allows for optimal power transmission during tightening and loosening. Avoid overtightening, which can strip threads or damage materials, and undertightening, which can lead to loose connections.
- Verification: After tightening, visually inspect the connection to ensure all components are properly seated and the joint is stable.
Image: An example of the hexagon bolt in use, securing a wooden post within a metal post support. Two bolts are visible, demonstrating a typical application for stable construction.
Maintenance
The Connex Hexagon Bolts are galvanized, providing good corrosion protection for outdoor use and extended durability. While minimal maintenance is required, periodic inspection of fastened joints is recommended, especially in environments exposed to moisture or extreme weather conditions. Check for any signs of loosening or corrosion and re-tighten or replace components as necessary to maintain structural integrity.
Troubleshooting
Most issues related to fasteners can be resolved by ensuring proper installation techniques.
- Loose Connection: If a connection feels loose, ensure the bolt and nut are fully engaged and tightened to the appropriate torque. The spring washer helps maintain tension.
- Difficulty Tightening: Check for thread alignment. Ensure the bolt and nut threads are clean and undamaged. Do not force tightening if resistance is met, as this can strip threads.
- Corrosion: While galvanized for protection, prolonged exposure to harsh chemicals or extreme conditions can lead to corrosion. If significant corrosion occurs, replacement of the affected components is recommended.
Specifications
| Feature | Detail |
|---|---|
| Brand | Connex |
| Model Number | B30019 |
| Fastener Type | Bolt |
| Head Style | Hex |
| Finish Type | Zinc (Galvanised) |
| Shape | Hexagonal |
| Item Diameter | 10 Millimeters (M10) |
| Thread Size | M10 |
| Number of Pieces (per pack) | 10 (bolts, washers, spring washers, nuts each) |
| Material | Alloy Steel |
| Item Weight (per pack) | 930 g |
| Product Dimensions | 25 x 14 x 2.8 cm |
| Measurement System | Metric |
| Specification Met | DIN931 |
| GTIN (Global Trade Identification Number) | 04004722582383 |
Warranty and Support
For specific warranty information regarding your Connex Hexagon Bolts, please refer to the documentation provided at the time of purchase or contact the retailer. As a general guideline, Connex products are manufactured to high-quality standards.
For technical support or inquiries, please reach out to the manufacturer, Connex, or your product supplier. Ensure you have your product model number (B30019) and purchase details available when contacting support.
