UpBright 26V AC/DC Adapter User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your UpBright 26V AC/DC Adapter. This adapter is specifically designed to be compatible with the VYBE Premium Vibration Massager Device Model 8806, including models with Li-ion batteries and professional percussion muscle deep tissue massage guns requiring a 26V power supply.

2. Safety Information

• Ensure the adapter's voltage and current ratings match your device's requirements. This adapter provides 26V output.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to strong impacts.
• Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
• Unplug the adapter from the power outlet when not in use or during electrical storms.
• Keep out of reach of children.
• Important: This adapter is NOT compatible with VYBE Pro models.

3. Product Overview

The UpBright 26V AC/DC Adapter is a reliable power supply designed for specific VYBE massage devices. It features a standard AC input (100-240VAC, 50/60Hz) for worldwide use and provides a stable 26V DC output.

Figure 3.1: The UpBright 26V AC/DC Adapter, showing the main unit and attached power cord with a barrel connector.

Figure 3.2: Visual representation of the UpBright AC Adapter's compatibility with VYBE massage guns, including the VYBE Premium and VYBE X Professional models.

4. Setup Instructions

1. Verify Compatibility: Confirm that your device is a VYBE Premium Vibration Massager Device Model 8806 or a compatible VYBE X Professional Percussion Massager requiring a 26V power supply. This adapter is not for VYBE Pro models.
2. Connect to Device: Insert the barrel connector end of the adapter cable firmly into the charging port of your VYBE massage device.


Figure 4.1: A close-up view of the barrel connector, which plugs into the device's charging port.

3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
4. Observe Charging Indicator: Your device should indicate that it is receiving power or charging. Refer to your device's manual for specific charging indicators.

5. Operating Instructions

Once connected, the adapter will supply power to your device. For charging, ensure the device is powered off to optimize charging time. The adapter is designed for continuous use within its specified voltage and current limits.

The adapter features OVP (Over Voltage Protection), OCP (Over Current Protection), and SCP (Short Circuit Protection) to ensure safe operation and protect your device from electrical damage.

6. Maintenance

• Keep the adapter clean and free from dust. Use a dry, soft cloth for cleaning.
• Store the adapter in a cool, dry place when not in use.
• Avoid wrapping the cable too tightly around the adapter to prevent damage to the wiring.
• Regularly inspect the cable and connector for any signs of wear or damage. Discontinue use if damage is observed.

7. Troubleshooting

• Device Not Charging:
  • Ensure the adapter is securely plugged into both the wall outlet and the device.
  • Verify the wall outlet is functional by testing it with another device.
  • Check for any visible damage to the adapter cable or connector.
  • Confirm that your device is indeed the VYBE Premium Vibration Massager Model 8806 or a compatible model requiring 26V. This adapter is not for VYBE Pro models.
• Flashing Lights on Device When Connected: If your VYBE device displays a flashing light sequence when connected to this adapter, it may indicate an incompatibility or a charging issue specific to your device model. While this adapter is listed as compatible with Model 8806, some users have reported flashing lights and no charge. In such cases, verify the exact model number of your device and consult the device's original manual or manufacturer for clarification on charging behavior. If the issue persists, the adapter may not be suitable for your specific unit despite general compatibility claims.
• Adapter Feels Hot: It is normal for power adapters to become warm during operation. If the adapter becomes excessively hot, unplug it immediately and discontinue use. Ensure adequate ventilation around the adapter.

8. Specifications

9. Warranty Information

UpBright products typically come with a 30-day refund policy and a 24-month exchange warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty certificate included with your product or contact UpBright customer support.

Figure 9.1: Example of an UpBright Limited Warranty Certificate.

10. Support

For further assistance, technical support, or warranty inquiries, please contact UpBright customer service through their official website or the retailer where the product was purchased. Please have your product model and purchase details ready.