Introduction
This manual provides essential information for the proper use, installation, and maintenance of your WASP WWS800 Scanner Additional Battery. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Image: The WASP WWS800 Scanner Additional Battery, a compact black rectangular battery pack with gold contact pins on one end.
Safety Information
Observe the following safety precautions to prevent damage to the battery or scanner, and to avoid personal injury:
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Do not expose the battery to high temperatures (above 60°C / 140°F) or direct sunlight.
- Do not dispose of the battery in fire or water.
- Use only the charger specified for the WASP WWS800 scanner to charge this battery.
- Keep the battery away from children.
- If the battery leaks, avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water and seek medical attention.
Setup
To install the additional battery into your WASP WWS800 scanner:
- Ensure the WASP WWS800 scanner is powered off.
- Locate the battery compartment on the scanner. Refer to your scanner's main user manual for specific instructions on opening the compartment.
- Carefully insert the additional battery, ensuring the gold contact pins align correctly with the terminals inside the compartment.
- Close the battery compartment securely.
- It is recommended to fully charge the battery before first use.
Operating
The WASP WWS800 Scanner Additional Battery functions as a power source for your scanner. Once installed, the scanner will draw power from the battery. To charge the battery:
- Connect the WASP WWS800 scanner to its designated charging cable or cradle.
- Ensure the charging indicator on the scanner (if available) shows that charging is in progress.
- Charging time may vary depending on the battery's current charge level and the charger's specifications.
- The battery is designed to provide extended operational time for your WASP WWS800 scanner. Actual battery life will vary based on usage patterns and scanner settings.
Maintenance
Proper maintenance extends the life of your battery:
- Storage: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid storing fully charged or fully depleted batteries.
- Cleaning: Use a dry, soft cloth to clean the battery and its contacts. Do not use liquid cleaners or solvents.
- Handling: Avoid dropping the battery or subjecting it to strong impacts.
- Disposal: Dispose of used batteries according to local regulations. Do not discard with household waste.
Troubleshooting
If you encounter issues with your additional battery, consider the following:
- Battery not charging:
- Ensure the battery is correctly seated in the scanner's compartment.
- Verify the charging cable/cradle is properly connected to the scanner and a power source.
- Check if the scanner's main battery (if applicable) is also charging.
- Try cleaning the battery contacts and scanner terminals with a dry cloth.
- Scanner not powering on with new battery:
- Confirm the battery is fully charged.
- Re-install the battery to ensure proper connection.
- Test the scanner with its original battery (if applicable) to rule out scanner issues.
- Short battery life:
- Ensure the battery is fully charged before use.
- Environmental factors (extreme temperatures) can affect battery performance.
- Over time, all rechargeable batteries experience a decrease in capacity.
Specifications
| Feature | Detail |
|---|---|
| Brand | Wasp |
| Model Number | 6.33808E+11 |
| Product Dimensions | 4.75 x 2.3 x 0.6 inches |
| Item Weight | 0.01 ounces |
| ASIN | B00HOE0BKO |
| Date First Available | July 7, 2016 |
| Manufacturer | Yuaben |
Warranty Information
Specific warranty terms for the WASP WWS800 Scanner Additional Battery may vary. Please refer to the original product packaging or the official Wasp website for detailed warranty information. Keep your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your WASP WWS800 Scanner Additional Battery, please visit the official Wasp website or contact their customer service department. Contact details are typically available on the manufacturer's website or product documentation.
You can find more information at: Wasp Barcode Technologies Official Website