Einhell TE-SD 3.6 Li Cordless Screwdriver User Manual

1. Introduction

The Einhell TE-SD 3.6 Li cordless screwdriver is a versatile and practical tool designed for various DIY projects. Featuring a powerful lithium-ion battery, a pivoting handle for enhanced accessibility, and multiple torque settings, this screwdriver provides efficient and comfortable operation. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your Einhell TE-SD 3.6 Li cordless screwdriver.

2. Safety Instructions

Always observe the following basic safety precautions when using electric tools to reduce the risk of electric shock, injury, and fire.

2.1 General Safety Rules

• Read the entire manual: Familiarize yourself with the controls and proper use of the tool.
• Keep work area clean: Cluttered areas invite accidents.
• Avoid dangerous environments: Do not use power tools in damp or wet locations, or expose them to rain. Keep work area well lit.
• Keep children away: All visitors should be kept at a safe distance from the work area.
• Store idle tools: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.

2.2 Electrical Safety

• Charging: Only use the charger supplied with the tool. Do not charge the battery in damp or wet conditions.
• Avoid body contact with grounded surfaces: For example, pipes, radiators, ranges, and refrigerators.

2.3 Personal Safety

• Wear eye protection: Always wear safety glasses.
• Dress properly: Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts.
• Stay alert: Watch what you are doing, use common sense. Do not operate tool when you are tired.

2.4 Tool Use and Care

• Use the correct tool: Do not force small tool or attachment to do the job of a heavy-duty tool.
• Secure workpiece: Use clamps or a vise to hold the workpiece. It is safer than using your hand and it frees both hands to operate the tool.
• Maintain tools with care: Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.
• Disconnect tools: Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.

3. Product Overview

The Einhell TE-SD 3.6 Li cordless screwdriver is designed for efficient and precise screwing tasks. Below are its key features and included components.

3.1 Key Features

• Powerful Motor & High Torque: Delivers 3.5 Nm of torque for various screwing applications.
• Lithium-Ion Battery: Provides 30% more capacity for extended operating time.
• Softgrip Handle: Ensures comfortable and secure handling during use.
• Pivoting Handle: Allows conversion from pistol grip to straight screwdriver for access in confined spaces.
• Locking Ring: Securely fastens screwdriver bits, preventing accidental detachment.
• Magnetic Screw Holder: Located at the top of the screwdriver for convenient screw retention.
• Dual LED Lights: Illuminates the work area for optimal visibility in all conditions.
• 3-Level LED Battery Indicator: Displays the current charge status of the battery.
• 7-Level Torque Adjustment: Allows precise power adaptation for different screwing tasks.

3.2 Included Components

• 1x Einhell TE-SD 3.6 Li Cordless Screwdriver
• 1x Charger
• 1x Protective Metal Case
• 1x 32-piece Accessory Bit Set (including 10 standard bits, 13 Torx bits, 7 Allen bits, 1 adapter, 1 bit holder)

Image: Einhell TE-SD 3.6 Li Cordless Screwdriver shown with its included 32-piece bit set in a transparent case.

4. Setup

4.1 Charging the Battery

1. Ensure the screwdriver is switched off.
2. Connect the charger to a suitable power outlet.
3. Plug the charger into the charging port on the screwdriver.
4. The battery indicator LEDs will show the charging status. Allow the battery to fully charge before first use.
5. Once fully charged, disconnect the charger.

4.2 Inserting and Changing Bits

1. Ensure the screwdriver is switched off and the forward/reverse switch is in the neutral (locked) position.
2. Pull the locking ring forward to unlock the bit holder.
3. Insert the desired screwdriver bit firmly into the bit holder.
4. Release the locking ring to secure the bit in place. Gently pull on the bit to ensure it is properly locked.
5. To remove a bit, pull the locking ring forward and extract the bit.

4.3 Adjusting the Pivoting Handle

1. Locate the handle pivot button or mechanism on the tool.
2. Press and hold the button, then rotate the handle to either the pistol grip or straight screwdriver configuration.
3. Release the button once the handle is in the desired position and ensure it locks securely.

5. Operating Instructions

5.1 Turning On/Off and Forward/Reverse Operation

• To turn on: Press the trigger switch. The LED work lights will illuminate.
• To turn off: Release the trigger switch.
• Forward rotation: Push the forward/reverse switch to the left (when viewed from the rear of the tool).
• Reverse rotation: Push the forward/reverse switch to the right.
• Lock position: Place the switch in the center position to prevent accidental activation and for bit changes.

5.2 Adjusting Torque Settings

1. The torque adjustment ring is located near the bit holder.
2. Rotate the ring to select the desired torque level from 1 to 7.
3. Lower settings are for smaller screws and softer materials, while higher settings are for larger screws and harder materials.
4. Start with a lower setting and increase if necessary to avoid overtightening or damaging the screw head.

5.3 Using the Magnetic Screw Holder

The integrated magnetic screw holder allows you to temporarily hold screws on the top of the tool, providing convenience and preventing screws from being misplaced during work.

5.4 Battery Charge Indicator

The 3-level LED indicator shows the remaining battery charge. Press the battery indicator button to check the current status. Recharge the battery when the indicator shows a low charge to ensure uninterrupted operation.

Image: A person using the Einhell TE-SD 3.6 Li cordless screwdriver in a pistol grip configuration to perform a task on a motorcycle.

6. Maintenance

6.1 Cleaning

• Always remove the battery before cleaning.
• Keep the ventilation slots clean to prevent overheating.
• Wipe the tool housing with a soft, damp cloth. Do not use harsh cleaning agents or solvents.
• Clean the bit holder regularly to ensure smooth bit insertion and removal.

6.2 Battery Care and Storage

• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery to approximately 50% capacity.
• Avoid fully discharging the battery, as this can reduce its lifespan.
• Do not store the tool with the battery connected for extended periods.

6.3 General Inspection

• Regularly check for any signs of damage to the tool, charger, or battery.
• Ensure all screws and fasteners are tight.
• If any damage is found, do not use the tool and contact qualified service personnel for repair.

7. Troubleshooting

This section addresses common issues you might encounter with your cordless screwdriver.

8. Specifications

9. Warranty and Support

Specific warranty terms and conditions for the Einhell TE-SD 3.6 Li cordless screwdriver are not provided within this manual. For detailed warranty information, product support, or service inquiries, please refer to the documentation included with your purchase, visit the official Einhell website, or contact your retailer.