Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SmartSign "Speed Limit 5 MPH" sign. Designed for durability and high visibility, this sign is an essential tool for traffic management and safety in various environments.
Figure 1: Front view of the SmartSign "Speed Limit 5 MPH" sign, displaying clear black text on a reflective white background.
Product Features
The SmartSign "Speed Limit 5 MPH" sign is engineered with high-quality materials and advanced features to ensure long-lasting performance and effective communication.
- Durable Aluminum Construction: Made from 63 mil thick rustproof aluminum, ensuring resilience against environmental factors.
- 3M High-Intensity Grade Reflectivity: Utilizes 3M reflective film, providing up to three times more reflectance than engineer grade signs, enhancing visibility, especially at night and from various angles.
- Laminated Protection: Features a clear UV laminate that protects graphics from weather, abuse, chemicals, and UV rays, also allowing for easy cleaning of graffiti.
- Pre-Drilled Holes: Equipped with rounded, burr-free corners and 3/8 inch punched, pre-cleared holes for straightforward installation.
- Industrial Grade & UV Resistant: Designed for outdoor life with a wide temperature range tolerance (-40°F to +176°F).
Figure 2: Key features of the SmartSign, highlighting its robust construction and reflective properties.
Figure 3: Illustration of the sign's 63 mil thick heavy-duty aluminum construction, comparable to the thickness of a US quarter.
Setup and Installation
Proper installation ensures the sign's effectiveness and longevity. The sign is designed for easy mounting on various surfaces.
Mounting Instructions:
- Prepare Mounting Surface: Ensure the surface (U-channel post, square or round galvanized post, wooden post, or chain-link fence) is clean and stable.
- Align Sign: Position the sign at the desired height and location. The sign features pre-drilled 3/8 inch holes for convenience.
- Secure Fasteners: Use appropriate fasteners (not included) such as bolts, screws, or zip ties, depending on the mounting surface, to secure the sign through the pre-drilled holes. Ensure the fasteners are tightened sufficiently to prevent movement but do not overtighten to avoid damaging the sign.
Figure 4: Dimensional diagram of the sign, indicating 12" x 18" size and 3/8" pre-drilled holes for mounting.
Operation
The SmartSign "Speed Limit 5 MPH" sign operates passively by clearly displaying the speed limit. Its primary function is to provide visual communication to drivers and pedestrians, promoting safety and adherence to designated speed zones.
Visibility:
- Daytime: The bold black text on a white background ensures high contrast and readability in daylight conditions.
- Nighttime: The 3M High-Intensity Grade reflective material significantly enhances visibility in low-light conditions and at night when illuminated by vehicle headlights. This ensures the sign remains effective 24/7.
Figure 5: The sign's reflective properties are clearly visible, demonstrating its effectiveness during nighttime conditions.
Maintenance
To ensure your SmartSign maintains its optimal appearance and functionality, follow these simple maintenance guidelines:
- Cleaning: Periodically clean the sign surface with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the laminate or reflective material.
- Graffiti Removal: The laminated surface allows for easy removal of graffiti. Use appropriate graffiti cleaning solutions as recommended for laminated surfaces, wiping gently to avoid scratching.
- Inspection: Regularly inspect the sign for any signs of damage, such as bends, cracks, or fading. Ensure mounting hardware remains secure.
Figure 6: The sign's durable construction and laminated finish contribute to its long-term appearance and ease of maintenance.
Troubleshooting
While the SmartSign is designed for durability, here are some common issues and their potential solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Reduced Reflectivity at Night | Dirt, grime, or debris on the sign surface. | Clean the sign surface thoroughly with mild soap and water. |
| Sign Appears Loose or Wobbly | Loose mounting hardware or damaged post. | Check and tighten all mounting fasteners. Inspect the mounting post for damage and repair or replace if necessary. |
| Fading or Discoloration | Extreme prolonged exposure to harsh UV rays (unlikely due to UV laminate). | While highly resistant, extreme conditions over many years might cause minimal fading. No direct solution other than replacement if significant. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | K-2079-HI-12x18 |
| Dimensions | 12" x 18" (0.08 x 12 x 18 inches) |
| Material | 63 mil Thick Rustproof Aluminum |
| Reflectivity Grade | 3M High-Intensity Grade |
| Lamination | Clear UV Laminate |
| Item Weight | 1.34 pounds |
| Mounting Type | Wall Mount (pre-drilled holes) |
| Temperature Range | -40°F to +176°F |
| Outdoor Life Expectancy | More than 10 years durability |
Warranty Information
SmartSign products are manufactured to high standards, ensuring long-term performance. This sign is designed for more than 10 years of durability under normal outdoor conditions, backed by the quality of 3M materials and SmartSign's manufacturing expertise.
For specific warranty claims or details, please refer to the official SmartSign website or contact their customer service directly.
Support and Contact
For further assistance, technical support, or inquiries regarding your SmartSign "Speed Limit 5 MPH" sign, please visit the official SmartSign store or contact their customer service department.
SmartSign Official Store: Visit SmartSign Store on Amazon
Please have your model number (K-2079-HI-12x18) ready when contacting support for faster service.
