TayMac MW2500W

Download PDF
Contents

TayMac MW2500W Single-Gang Decorator Duplex Wall Plate

Model: MW2500W | Brand: TayMac

Introduction

White TayMac MW2500W Single-Gang Decorator Duplex Wall Plate.

Image: White TayMac MW2500W Single-Gang Decorator Duplex Wall Plate.

The TayMac MW2500W Decorator Cover Wall Plate is designed to provide a contemporary and designer look to your electrical outlets. This non-metallic wall plate is engineered for easy installation, allowing you to cover old, outdated, discolored, or paint-stained outlets and switches without the need for complex rewiring. Its durable polycarbonate construction ensures longevity and resistance to cracking or distortion.

Key Features

  • Enhanced Aesthetics: Instantly improves the appearance of any room by covering older, discolored, or paint-stained fixtures.
  • Easy Installation: Designed for quick and simple replacement of existing cover plates, requiring no rewiring.
  • Contemporary Design: Features a smooth, decorative finish for a modern and unobtrusive look.
  • Durable Construction: Made from high-quality, nearly-unbreakable polycarbonate plastic that resists wear, cracking, and distortion.
  • Covers Imperfections: Effectively conceals overpainted edges and discolored areas around outlets.

Setup & Installation

The TayMac MW2500W wall plate is designed for straightforward installation over existing single-gang duplex outlets. No electrical rewiring is necessary.

  1. Safety First: Before beginning, ensure the power to the outlet you are working on is turned off at the circuit breaker.
  2. Remove Old Plate: Carefully unscrew and remove the existing wall plate from the outlet.
  3. Position New Plate: Align the TayMac MW2500W wall plate over the existing outlet, ensuring the openings match the receptacles.
  4. Secure Plate: Use the provided screws to firmly attach the new wall plate to the electrical box. Do not overtighten.
  5. Restore Power: Once the new plate is securely installed, restore power at the circuit breaker.
TayMac MW2500W wall plate on a tiled wall, highlighting quick and easy installation, no rewiring needed, unbreakable, and high-impact plastic.

Image: TayMac MW2500W wall plate on a tiled wall, highlighting quick and easy installation, no rewiring needed, unbreakable, and high-impact plastic.

TayMac MW2500W wall plate superimposed on a house exterior, emphasizing its ability to upgrade room appearance and cover old fixtures.

Image: TayMac MW2500W wall plate superimposed on a house exterior, emphasizing its ability to upgrade room appearance and cover old fixtures.

Operating Instructions

The TayMac MW2500W wall plate serves as a protective and aesthetic cover for your electrical outlets. Once installed, the functionality of your outlet remains unchanged. Simply use your electrical devices as you normally would by plugging them into the covered receptacles.

Maintenance

To maintain the appearance and cleanliness of your TayMac MW2500W wall plate, follow these simple guidelines:

  • Cleaning: Wipe the surface with a soft, damp cloth. For stubborn marks, a mild soap solution can be used.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish of the wall plate.
  • Regular Inspection: Periodically check the wall plate for any signs of damage or loosening. Ensure screws remain snug.
Two TayMac MW2500W wall plates, one installed and one being held, illustrating the highly durable, nearly-unbreakable plastic construction.

Image: Two TayMac MW2500W wall plates, one installed and one being held, illustrating the highly durable, nearly-unbreakable plastic construction.

Troubleshooting

ProblemPossible CauseSolution
Wall plate does not fit correctly.Incorrect size or style for the existing outlet/switch.Verify the existing outlet/switch type (e.g., duplex, toggle, decorator) and ensure the wall plate matches. Check dimensions.
Wall plate appears loose after installation.Screws are not tightened sufficiently.Gently tighten the mounting screws until the plate is snug against the wall. Do not overtighten.
Scratches or marks on the plate.Abrasive cleaning materials or sharp objects.Clean only with a soft, damp cloth. Avoid abrasive materials. Minor scratches may be permanent.

Specifications

AttributeDetail
Model NumberMW2500W
BrandTayMac
Switch TypeDecorator
MaterialPolycarbonate (PC)
ColorWhite
Product Dimensions (W x H)3.3" x 5.1"
Finish TypePlastic, Polycarbonate
ConfigurationSingle
Installation TypeScrew-In
Item Weight3.2 ounces
UPC092326100540
ManufacturerHubbell Electrical Products
Included ComponentsDecorator wall plate, screws
Number Of Pieces5 (for the pack)
Dimensions diagram of the TayMac MW2500W wall plate, showing 5.1 inch height, 3.3 inch width, and 0.8 inch depth.

Image: Dimensions diagram of the TayMac MW2500W wall plate, showing 5.1 inch height, 3.3 inch width, and 0.8 inch depth.

TayMac MW2500W wall plate with a cULus certification logo, indicating safety compliance.

Image: TayMac MW2500W wall plate with a cULus certification logo, indicating safety compliance.

Warranty & Support

For specific warranty information or technical support regarding your TayMac MW2500W wall plate, please refer to the packaging or contact TayMac customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.

© 2023 TayMac. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.