Roppe 700 Series Rubber/Vinyl Covebase Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the proper installation, maintenance, and care of the Roppe 700 Series Rubber/Vinyl Covebase. Adhering to these guidelines will ensure optimal performance and longevity of your covebase.

2. Product Overview

The Roppe 700 Series Covebase is a high-quality wall base product designed for various flooring applications. It is manufactured from a unique blend of thermoplastic rubber and vinyl, offering enhanced flexibility and durability compared to traditional vinyl base products. Its design prevents shrinking, gapping, or cupping, ensuring a clean and professional finish.

Figure 1: Roppe 700 Series Rubber/Vinyl Covebase, 120-foot coil in Brown. This image shows the full coil of the covebase, highlighting its uniform color and flexible material.

3. Features

• Extremely Durable and Flexible: Engineered for resilience and ease of installation around curves.
• Will not Shrink, Gap or Cup: Maintains its integrity and appearance over time.
• Recyclable (IMPACT Recycling Program): Environmentally conscious product.
• Qualifies for LEED Credits & FloorScore Certified: Meets high standards for indoor air quality and sustainable building.

4. Installation

4.1. Preparation

• Ensure the wall surface is clean, dry, smooth, and free of dust, grease, or loose paint.
• Acclimate the covebase to room temperature for at least 24 hours prior to installation.
• Gather necessary tools: measuring tape, utility knife, straightedge, adhesive spreader, and manufacturer-approved adhesive (e.g., Roppe WB-600 Epoxy Nose Filler).

4.2. Adhesive Application

Apply a uniform layer of manufacturer-approved adhesive to the back of the covebase or directly to the wall using an appropriate spreader. Follow the adhesive manufacturer's instructions for open time and curing.

4.3. Installation Steps

1. Begin installation in a corner or at a doorway.
2. Press the covebase firmly against the wall, ensuring full contact with the adhesive. Work in sections, smoothing out any air bubbles or inconsistencies.
3. For inside and outside corners, the flexibility of the 700 Series allows for easy bending. For a cleaner finish, consider using Roppe Inside Corner Block (B084Q18Y1S) or Outside Corner Block (B084RBSB4R) accessories.
4. Trim excess material with a sharp utility knife and straightedge.
5. Roll the installed covebase with a hand roller to ensure maximum adhesion.
6. Allow the adhesive to cure completely before exposing the covebase to heavy traffic or cleaning, as per adhesive manufacturer's guidelines.

Figure 2: Roppe 700 Series Rubber/Vinyl Covebase installed along a wall. This image demonstrates the finished appearance of the covebase, showing its smooth curve and integration with the floor and wall.

5. Maintenance and Care

The Roppe 700 Series Covebase is designed for low maintenance. Regular cleaning with a damp cloth and mild, non-abrasive cleaner is sufficient to maintain its appearance. Avoid harsh chemicals or abrasive cleaning tools, as these can damage the surface.

6. Troubleshooting

6.1. Covebase Not Adhering Properly

• Cause: Insufficient adhesive, improper surface preparation, or inadequate pressure during installation.
• Solution: Ensure surfaces are clean and dry. Apply sufficient, uniform adhesive. Apply firm, consistent pressure during installation and use a roller.

6.2. Gaps Appearing After Installation

• Cause: Improper trimming, insufficient adhesive, or extreme temperature fluctuations.
• Solution: Ensure precise cuts. Verify adequate adhesive application. Allow covebase to acclimate to room temperature before installation.

7. Specifications

8. Warranty Information

The Roppe 700 Series Rubber/Vinyl Covebase comes with a 2 Year Limited Warranty. For specific terms and conditions, please refer to the official Roppe warranty documentation or contact customer support.

9. Customer Support

For further assistance, technical support, or warranty claims, please contact Roppe customer service. While specific contact details are not provided in this manual, general customer support information can often be found on the Roppe brand page on Amazon or the official Roppe website.