1. Introduction
Thank you for choosing the Eveready General Purpose LED Flashlight. This manual provides important information on the safe and effective use of your new flashlight. Designed for basic lighting needs, this flashlight features bright, energy-efficient LED technology that is up to 5 times brighter than ordinary LED technology, offering a strong beam and extended runtime. Its ribbed design ensures a secure grip, and the convenient push-button switch allows for easy operation.
This image displays the Eveready General Purpose LED Flashlight 2-Pack, featuring one red and one blue flashlight, alongside two Eveready D-cell batteries. The packaging highlights 'LED Technology' and '60h of runtime'.
2. Safety Information
Please read all instructions and cautionary markings on the package and the flashlight before use. Failure to follow these instructions may result in fire, explosion, or leakage.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Do not dispose of batteries in fire; batteries may explode or leak.
- Remove batteries from the product before extended storage to prevent leakage.
- Do not look directly into the LED light source, as this may cause eye damage.
This image shows the reverse side of the Eveready flashlight packaging, detailing important safety warnings regarding battery usage and disposal, along with manufacturing and contact information.
3. Package Contents
Your Eveready General Purpose LED Flashlight package includes:
- 2 x Eveready General Purpose LED Flashlights (one red, one blue)
- 2 x Eveready D Batteries
4. Setup: Battery Installation
To install or replace batteries:
- Unscrew the head of the flashlight counter-clockwise to open the battery compartment.
- Insert one D-cell battery into the flashlight with the positive (+) end facing towards the head of the flashlight.
- Screw the head back onto the flashlight clockwise until it is securely tightened.
This image shows a red Eveready flashlight alongside two D-cell batteries, illustrating the type of battery required for operation.
5. Operating Instructions
The Eveready General Purpose LED Flashlight is designed for simple and straightforward use.
- Turning On/Off: Locate the push-button switch on the side of the flashlight. Press the button once to turn the flashlight ON. Press the button again to turn the flashlight OFF.
- Secure Grip: The flashlight features a ribbed design along its body, providing a secure and comfortable grip during use.
- Bright Illumination: The advanced LED technology delivers a bright, long-lasting beam suitable for various general purpose lighting tasks.
This close-up image highlights the bright, long-lasting LED light emitted by the Eveready flashlight, emphasizing its 25 lumens output.
This composite image demonstrates the Eveready flashlight's utility in different settings, including illuminating a fuse box and providing light for plumbing work under a sink.
This image shows a man and a child using an Eveready flashlight to illuminate a car tire at night, demonstrating its practical use in low-light conditions.
6. Maintenance
- Cleaning: Wipe the exterior of the flashlight with a soft, dry cloth. Do not use abrasive cleaners or immerse the flashlight in water.
- Battery Replacement: Replace batteries when the light dims significantly or stops working. Always use fresh D-cell batteries. Refer to Section 4 for battery installation instructions.
- Storage: For extended storage, remove the batteries from the flashlight to prevent potential leakage and damage to the device. Store in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Dead or incorrectly inserted batteries. | Check battery orientation. Replace with fresh D-cell batteries. |
| Light is dim. | Low battery power. | Replace with fresh D-cell batteries. |
| Light flickers. | Loose battery connection or low battery. | Ensure battery compartment is tightly closed. Replace batteries if needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 30039800120831 |
| Power Source | Battery Powered |
| Light Source Type | LED |
| White Brightness | 9 Lumens (up to 25 lumens as per packaging) |
| Runtime | 40 hours (up to 60 hours as per packaging) |
| Battery Type | 2 x D batteries (Zinc Carbon / Alkaline) |
| Material | Plastic |
| Color | Multicolor (Red, Blue) |
| Product Dimensions | 2.6"D x 7.25"W x 9.5"H |
| Item Weight | 11.7 ounces |
| Water Resistance Level | Not Water Resistant |
| Manufacturer | Energizer Battery Company, inc. |
9. Warranty and Support
This Eveready flashlight comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact Energizer Battery Company, Inc. directly.
For customer support or inquiries, please visit the official Eveready website or contact their customer service department. Contact information can typically be found on the product packaging or their official website.
Manufacturer: Energizer Battery Company, inc.
UPC: 039800120830
