BLACK+DECKER MTD100 Lawn Mower Removable Deck for String Trimmer

1. Product Overview

The BLACK+DECKER MTD100 Removable Mower Deck is designed to convert your compatible 12-inch BLACK+DECKER string trimmer/edger into a lightweight lawn mower. This attachment is ideal for maintaining smaller yards, navigating inclines, or reaching areas difficult for standard mowers.

Key Features:

• 3-in-1 Functionality: Easily converts a 12-inch string trimmer/edger into a mower.
• Adjustable Cutting Height: Features two height settings for optimal grass cutting.
• Compact Storage: Includes a wall-hanging option for convenient storage.
• Lightweight Design: Facilitates easy maneuverability and reduced user fatigue.

2. Important Safety Information

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always wear appropriate personal protective equipment, including eye protection, long pants, and sturdy footwear, when operating the string trimmer with or without the mower deck.
• Ensure the string trimmer is disconnected from its power source (battery removed or cord unplugged) before attaching, removing, or performing any maintenance on the mower deck.
• Keep hands and feet clear of the mowing area and the trimmer line at all times.
• Do not operate the unit in wet grass or damp conditions to avoid electrical hazards.
• Inspect the mower deck and string trimmer for any damage or loose parts before each use. Do not use if damaged.
• Keep children and pets away from the operating area.

3. Package Contents

Your BLACK+DECKER MTD100 package includes:

• 1 x MTD100 Detachable Mower Deck

Note: String trimmer is not included and must be purchased separately.

4. Setup and Assembly

4.1 Compatibility

The MTD100 Mower Deck is compatible with the following BLACK+DECKER 12-inch string trimmer/edger models:

• NST2118
• LST220
• LST300
• LST400
• LST522
• LSTE522
• LSTE523
• LSTE525

4.2 Attaching the Mower Deck

1. Ensure your string trimmer is turned off and the battery is removed (or unplugged).
2. Place the MTD100 mower deck on a flat, stable surface.
3. Align the head of your compatible string trimmer with the opening in the mower deck. The trimmer head should fit securely into the designated slot.
4. Gently push the trimmer down into the deck until it clicks into place. Verify that the orange tab (if present on your trimmer model) is fully engaged and locked.

Figure 1: String trimmer securely attached to the MTD100 mower deck.

4.3 Adjusting Cutting Height

The mower deck offers two adjustable cutting height settings. To adjust:

1. With the trimmer detached, locate the height adjustment levers on the mower deck.
2. Move the levers to your desired cutting height position.
3. Re-attach the string trimmer as described in Section 4.2.

5. Operating Your Mower Deck

5.1 General Operation

1. Ensure the string trimmer is securely attached to the mower deck and the battery is fully charged or the cord is properly connected.
2. Start the string trimmer according to its specific operating instructions.
3. Push the mower deck across the grass in overlapping rows, similar to a traditional lawn mower. Maintain a steady pace for an even cut.
4. Avoid attempting to cut excessively tall or wet grass, as this can strain the trimmer and lead to an uneven cut.
5. To switch back to string trimmer mode, turn off the trimmer, remove the battery/unplug the cord, and press the release tab to detach the trimmer from the mower deck.

Figure 2: Top-down view of the MTD100 mower deck.

6. Maintenance and Care

• Cleaning: After each use, ensure the string trimmer is off and disconnected from power. Clean any grass clippings or debris from the mower deck and trimmer head using a brush or cloth. Do not use water directly on electrical components.
• Storage: Store the mower deck in a dry, protected area. Utilize the integrated wall-hanging option for space-saving storage.
• Inspection: Regularly inspect the wheels, height adjustment mechanisms, and the trimmer attachment points for wear or damage. Replace any worn or damaged parts immediately.

7. Troubleshooting

8. Product Specifications

9. Warranty and Support

9.1 Manufacturer's Warranty

This BLACK+DECKER MTD100 Mower Deck is covered by a 2-year limited manufacturer's warranty. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official BLACK+DECKER website.

9.2 Customer Support

For technical assistance, replacement parts, or further information, please visit the BLACK+DECKER Store on Amazon or contact BLACK+DECKER customer service directly.