1. Introduction
The Xaralyn Flandria is an electric LED built-in fireplace designed to provide both decorative ambiance and supplemental heating. This unit features a realistic LED flame effect and adjustable heat settings, making it suitable for various room sizes without the need for a chimney. Its design allows for easy integration into custom fireplace surrounds or existing structures.
Key benefits include low energy consumption when used for decorative purposes only, and a maintenance-free operation. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your fireplace.
2. Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, observe the following instructions:
- Read all instructions before installing or using this fireplace.
- This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the fireplace.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the fireplace is left operating and unattended.
- Always unplug the fireplace when not in use.
- Do not operate any fireplace with a damaged cord or plug, or if the fireplace has malfunctioned, been dropped, or damaged in any manner.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This fireplace is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate fireplace where it may fall into a bathtub or other water container.
- Connect to properly grounded outlets only.
- Do not cover the heater. The warning label "Do Not Cover" is present on the unit.
Image 2.1: The Xaralyn Flandria electric fireplace, showing the internal components and the 'Do Not Cover' warning label above the heating element. This label indicates that the unit's ventilation openings must remain unobstructed to prevent overheating.
3. Package Contents
Please check that all items are present and undamaged upon opening the package. If any items are missing or damaged, contact your retailer.
- Xaralyn Flandria Electric LED Built-in Fireplace Unit
- Remote Control
- User Manual (this document)
4. Setup and Installation
The Xaralyn Flandria is designed for built-in installation. It requires a suitable recess or custom-built mantelpiece for proper integration. Ensure the installation location is stable, level, and can support the weight of the unit.
4.1 Dimensions and Clearance
Refer to the technical drawing below for precise dimensions and recommended clearances. It is crucial to maintain adequate space around the unit for proper ventilation and safe operation.
- Overall Dimensions (H x W x D): Approximately 434 mm x 600 mm x 176 mm
- Recess Dimensions: Consult the technical drawing for exact opening requirements.
- Electrical Connection: Ensure a dedicated, grounded electrical outlet is available within reach of the power cord.
Image 4.1: Technical drawing illustrating the front, side, and top views of the Xaralyn Flandria electric fireplace, complete with detailed measurements in millimeters. This diagram is essential for planning the built-in installation and ensuring correct fit and clearances.
4.2 Installation Steps
- Prepare the recess or mantelpiece opening according to the dimensions provided in the technical drawing.
- Carefully lift the fireplace unit and slide it into the prepared opening.
- Secure the unit in place using appropriate fasteners (not included) through the designated mounting points, if applicable.
- Ensure the unit is level and stable.
- Plug the power cord into a grounded electrical outlet.
Image 4.2: Two views of the Xaralyn Flandria electric fireplace integrated into a decorative white mantelpiece. The left image shows a side perspective, highlighting the depth of the unit within the surround. The right image provides a front view, demonstrating the seamless appearance of the installed fireplace.
5. Operation
The Xaralyn Flandria fireplace can be operated using the controls located on the unit or via the included remote control.
5.1 Controls
The control panel is typically located on the top right side of the unit, behind the front panel. The remote control duplicates these functions for convenience.
- Power Button: Turns the unit on or off.
- Flame Effect Button: Activates or deactivates the LED flame effect. The flame intensity may be adjustable.
- Heat Settings Button: Cycles through heating modes: Off, 750 Watt, and 1500 Watt.
Image 5.1: A close-up view of the Xaralyn Flandria electric fireplace showcasing its realistic LED flame effect and glowing log set. The vibrant orange and yellow hues simulate a traditional wood-burning fire, providing ambiance without actual combustion.
5.2 Using the Remote Control
Point the remote control directly at the fireplace unit. Ensure there are no obstructions between the remote and the unit.
- Insert batteries into the remote control (if not pre-installed).
- Press the corresponding buttons to control power, flame effect, and heat settings.
5.3 Heating Function
The fireplace offers two heat settings: 750 Watt and 1500 Watt. The 1500 Watt setting is sufficient to provide supplemental heating for rooms up to approximately 22 square meters (237 sq ft) with standard ceiling heights. For larger rooms, it serves as an additional heat source.
When only the flame effect is active (heating off), the energy consumption is negligible (approximately 10 Watt), making it an energy-efficient decorative feature.
6. Maintenance
The Xaralyn Flandria electric fireplace is designed to be maintenance-free. Regular cleaning is recommended to keep the unit in optimal condition.
6.1 Cleaning
- Always unplug the fireplace from the power outlet before cleaning.
- Wipe the exterior surfaces with a soft, dry cloth.
- Do not use abrasive cleaners, chemical sprays, or harsh detergents, as these may damage the finish.
- Ensure that no moisture enters the internal components of the fireplace.
7. Troubleshooting
If you experience issues with your Xaralyn Flandria fireplace, please consult the following troubleshooting guide before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power supply. | Check if the power cord is securely plugged into a grounded outlet. Verify the wall outlet is functional. Check the circuit breaker. |
| Flame effect is not visible. | Flame effect is turned off. | Press the flame effect button on the unit or remote control to activate. |
| No heat output. | Heating function is off or set to low. | Press the heat settings button to cycle to 750W or 1500W. Ensure the air intake/exhaust is not blocked. |
| Remote control not working. | Dead batteries or obstruction. | Replace batteries in the remote control. Ensure there is a clear line of sight between the remote and the fireplace. |
8. Specifications
| Brand | Xaralyn |
| Model | Flandria (03.WL.FLANDR01) |
| Manufacturer | RubyFires |
| Dimensions (H x W x D) | 434 mm x 600 mm x 176 mm |
| Weight | 11.7 kg |
| Power Consumption (Decorative) | 10 Watt |
| Heating Power | 0 - 750 - 1500 Watt (Adjustable) |
| Max Wattage | 1800 Watt |
| Energy Source | Electric (Wired) |
| Material | Metal |
| Finish | Lacquered |
| Installation Type | Built-in / Wall-mount |
| Special Features | Flame effect, Remote control |
| Color | Black |
| Ventilation Type | Ventless |
9. Warranty and Support
Specific warranty terms and conditions for the Xaralyn Flandria electric fireplace may vary depending on your region and retailer. Please consult your purchase documentation or contact your point of sale for detailed warranty information.
For technical support, service, or warranty claims, please contact your authorized Xaralyn retailer or the manufacturer directly. Ensure you have your model number (Flandria 03.WL.FLANDR01) and proof of purchase available when seeking assistance.
