UPBRIGHT 26V AC Adapter Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your UPBRIGHT 26V AC Adapter. This adapter is designed to power and charge compatible Apollo Kinetics Pulse Portable Massager models, including APO-MAS101, APO-MAS101-4A, and APO-MAS101-4A-GM. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: The UPBRIGHT 26V AC Adapter. This image displays the main view of the black AC adapter with its attached power cord and barrel connector. The adapter features a standard two-prong US plug.

2. Safety Information

• Use only with specified Apollo Kinetics Pulse Portable Massager models.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to severe impact.
• Do not attempt to open or modify the adapter.
• Ensure the power outlet voltage matches the adapter's input specifications (100-240VAC).
• Unplug the adapter from the power outlet when not in use or during electrical storms.
• Keep out of reach of children.

3. Setup and Connection

Follow these steps to properly connect and begin using your UPBRIGHT AC Adapter:

1. Inspect the Adapter: Before first use, visually inspect the adapter and cable for any signs of damage. Do not use if damaged.
2. Connect to Massager: Locate the DC input port on your Apollo Kinetics Pulse Portable Massager. Insert the barrel connector of the UPBRIGHT adapter firmly into this port.
3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
4. Verify Connection: Once connected, your massager should indicate that it is receiving power or charging, typically via an LED indicator on the massager itself.

Figure 2: Side view of the UPBRIGHT 26V AC Adapter. This image shows the adapter from a different angle, highlighting the robust construction of the power brick and the connection point for the cable.

4. Operating Instructions

The UPBRIGHT 26V AC Adapter is designed for straightforward operation:

• Charging: Connect the adapter as described in the "Setup and Connection" section. The adapter will automatically begin charging your Apollo Kinetics Pulse Portable Massager's internal battery. Refer to your massager's manual for specific charging indicators and times.
• Powering: If your massager supports direct operation while connected to power, the adapter will supply the necessary 26V DC power.
• Overload Protection: The adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard both the adapter and your device.

5. Maintenance and Storage

• Cleaning: Disconnect the adapter from both the power outlet and the massager before cleaning. Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Cable Care: Avoid sharp bends, kinks, or excessive pulling on the power cord. Do not place heavy objects on the cable.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Coil the cable loosely to prevent damage.

6. Troubleshooting

If you encounter issues with your UPBRIGHT AC Adapter, please refer to the following common solutions:

• Device Not Charging/Powering On:
  • Ensure the adapter is securely plugged into both the wall outlet and the massager.
  • Try a different wall outlet to rule out a faulty power source.
  • Verify that the massager's DC input port is clean and free of debris.
  • Important Note: Rechargeable batteries typically have a lifespan of 2-3 years. If your massager's battery is old or decayed, it may no longer accept a charge, even with a functional adapter. Consider if the massager's battery needs replacement.
• Adapter Feels Warm: It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot or emits a burning smell, immediately unplug it and discontinue use.
• Loose Connection: If the barrel connector feels loose in the massager's port, ensure it is fully inserted. If the issue persists, the port on the massager or the connector on the adapter may be damaged.

7. Specifications

8. Warranty and Support

Your UPBRIGHT 26V AC Adapter comes with the following warranty and support:

• Refund Policy: UPBRIGHT offers a 30-day refund period from the date of purchase.
• Exchange Policy: A 24-month exchange policy is provided for defective units.
• Customer Support: For further assistance or warranty claims, please refer to the UPBRIGHT brand store or contact your retailer.