Introduction
The Marantz SA8005 is a Super Audio CD player designed for high-fidelity audio reproduction. It features a reference-class D/A converter, HDAM technologies, and versatile digital audio inputs, including USB-A for portable devices and asynchronous USB-B for PC audio. This manual provides instructions for proper setup, operation, and maintenance of your SA8005 player.
The SA8005 incorporates discrete HDAM (Hyper Dynamic Amplifier Module) components, providing wide bandwidth and high slew rate for musical fidelity. It supports SACD and CD playback, along with digital audio files from various sources.
Setup
Unpacking
Carefully remove all components from the packaging. Ensure the following items are present:
- Marantz SA8005 Super Audio CD Player
- Remote Control
- Detachable Power Cord
- Owner's Manual (this document)
- Quick Start Guide
Connecting the Player
The rear panel of the SA8005 provides various connection options for integration into your audio system.
- Analog Audio Output: Connect the SA8005's analog audio output (RCA L/R) to the corresponding analog input on your amplifier or receiver using high-quality RCA cables.
- Digital Audio Inputs (Coaxial/Optical): Use these inputs to connect external digital audio sources, allowing the SA8005 to function as a standalone Digital-to-Analog Converter (DAC).
- USB-B Input: Connect a computer to this asynchronous USB-B port using a USB cable. This enables playback of high-resolution PCM and DSD audio files stored on your PC, utilizing the SA8005's internal DAC.
- Power Connection: Connect the detachable power cord to the AC IN port on the rear panel and then to a suitable AC wall outlet.
Remote Control Setup
The included remote control requires batteries for operation.
- Open the battery compartment on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment.
Operation
Basic CD/SACD Playback
- Press the POWER button to turn on the SA8005.
- Press the OPEN/CLOSE button to open the disc tray.
- Place a CD or Super Audio CD onto the disc tray with the label side facing up.
- Press the OPEN/CLOSE button again to close the disc tray. The player will read the disc.
- Press the PLAY button to begin playback.
- Use the SKIP buttons (◀◀ / ▶▶) to navigate between tracks.
- Press the STOP button to stop playback.
USB-A Device Playback
- Connect your USB thumb drive, iPod, or iPhone to the USB-A port on the front panel.
- Select the USB input using the INPUT selector on the front panel or remote control.
- Use the player's controls or remote to browse and select audio files for playback.
Using as a Digital-to-Analog Converter (DAC)
- External Digital Sources: Connect your external digital audio device (e.g., TV, game console) to the COAXIAL IN or OPTICAL IN ports on the rear panel. Select the corresponding input on the SA8005.
- PC Connection (USB-B): Connect your computer to the USB-B port on the rear panel. Ensure any necessary drivers are installed on your computer (refer to Marantz support for specific driver information if required). Select the USB-B input on the SA8005. Your computer will recognize the SA8005 as an audio output device.
Headphone Output
- Connect your headphones to the PHONES jack on the front panel.
- Adjust the headphone volume using the LEVEL knob located next to the headphone jack.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your SA8005.
- Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the player. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Disc Handling: Always handle discs by their edges to prevent fingerprints and scratches. Store discs in their cases when not in use.
- Ventilation: Ensure adequate ventilation around the unit to prevent overheating. Do not block ventilation openings.
- Servicing: Do not attempt to open or service the unit yourself. Refer all servicing to qualified Marantz service personnel.
Troubleshooting
If you encounter issues with your SA8005, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; wall outlet not active. | Ensure power cord is securely connected. Check if the wall outlet is functioning. |
| No sound or intermittent sound | Audio cables not connected correctly; incorrect input selected on amplifier; volume too low. | Verify all audio cable connections. Select the correct input on your amplifier. Increase volume on both the SA8005 and amplifier. |
| Disc not playing or skipping | Disc is dirty, scratched, or inserted incorrectly; disc format not supported. | Clean the disc with a soft cloth. Ensure the disc is inserted label-side up. Try a different disc. |
| USB device not recognized | Device not compatible; device not properly connected; file format not supported. | Ensure the USB device is compatible (e.g., FAT16/32 format for USB drives). Reconnect the device. Check supported file formats. |
| Noise (hiss/buzz) during playback or idle | Ground loop; interference from other electronics; faulty cables. | Ensure all components are properly grounded. Try disconnecting other electronics to isolate the source of interference. Replace audio cables if suspected faulty. |
| Headphone output volume too low | Headphones not fully plugged in; headphone impedance mismatch; headphone volume knob set too low. | Ensure headphones are fully inserted into the jack. Adjust the LEVEL knob on the front panel. Consider using headphones with appropriate impedance for the player. |
| Remote control not working | Batteries depleted or inserted incorrectly; obstruction between remote and player; remote sensor blocked. | Replace batteries, ensuring correct polarity. Remove any obstructions. Ensure the remote sensor on the player is not blocked. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (W x D x H) | 17 x 13 x 4 inches |
| Item Weight | 17.2 pounds |
| Model Number | SA-8005 |
| Connectivity Technology | USB (USB-A, USB-B) |
| Color | Black |
| Remote Control Batteries | 2 AAA batteries (required) |
| D/A Converter | CS4398 (supports 2.8/5.6 MHz DSD, up to 24-bit/192 kHz PCM) |
| HDAM Technology | Yes |
| Toroidal Power Supply | Yes |
Warranty and Support
Marantz products are designed for reliability and performance. For detailed warranty information, please refer to the separate warranty document included with your purchase or visit the official Marantz website.
For technical assistance, service, or further inquiries, please contact Marantz customer support. Contact details can typically be found on the Marantz official website or in the warranty documentation.