Introduction
This manual provides comprehensive instructions for the Versa Quad Watch Winder, model G088-Black. Designed to keep your automatic timepieces accurately wound and ready for wear, this winder features advanced settings for optimal watch care. It is suitable for all kinds of automatic watches, ensuring they remain wound and precise.
Image: Front view of the Versa Quad Watch Winder, showcasing its sleek black design and four individual winding modules.
Key Features
- Longer lasting direct-drive motor specifically designed for watch winders. Watch winder motor has 3 settings for clockwise, counter clockwise, and bi-directional. 4 settings for Turns Per Day (650-850-1050-1250). The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
- Independently control the settings for each winder. One watch per winder compared to other watch winders that hold two watches per winder which can risk damage to the watches when turning.
- Spring action pillow to support various watch sizes with additional adapter to fit larger size watches.
- Plenty of interior space for large and oversize watches.
- Power adapter included (110-240V). 1 yr warranty. Please contact us if you need assistance with your watch winder.
Image: Detailed view highlighting the multiple settings on the control panel, the adjustable spring-action watch pillow, and the ample space within each winding compartment.
Setup Guide
1. Power Connection
Connect the provided power adapter (110-240V) to the DC input port on the back of the winder and then plug it into a suitable electrical outlet. Ensure the connection is secure.
2. Placing Your Watch
Gently place your automatic watch onto the adjustable watch pillow. Ensure the watch is securely fitted around the pillow. The spring-action pillow accommodates various watch sizes, with an additional adapter provided to fit larger watches comfortably.
Image: The watch winder with four automatic watches securely placed in their individual winding modules, ready for operation.
Image: A diagram illustrating how the adjustable watch pillow can be used with or without an additional adapter to fit different wristband sizes, from 6 to 8 inches.
Operating Instructions
Turns Per Day (TPD) Settings
The Versa Quad Watch Winder offers four Turns Per Day (TPD) settings to accommodate various automatic watch movements. Select the appropriate TPD for your watch's specific requirements. The winder operates in cycles, turning for approximately 5 minutes and then resting, to prevent overwinding and ensure optimal winding efficiency.
| TPD Setting | Description |
|---|---|
| 650 | Minimum recommended turns for watches requiring less winding. |
| 850 | Standard turns for many common automatic movements. |
| 1050 | Higher turns for watches with more complex movements or lower power reserves. |
| 1250 | Maximum turns for watches with high winding demands. |
Directional Settings
Choose from three directional settings based on your watch's winding requirements. Consult your watch manufacturer's specifications for the recommended winding direction.
| Direction | Description |
|---|---|
| Clockwise (CW) | Winds the watch in a clockwise rotation. |
| Counter-Clockwise (CCW) | Winds the watch in a counter-clockwise rotation. |
| Bi-directional | Winds the watch in both clockwise and counter-clockwise rotations. |
Independent Control
Each of the four winder modules can be controlled independently. This allows you to customize the TPD and directional settings for different watches simultaneously, ensuring each timepiece receives its optimal winding.
Maintenance
To maintain your Versa Quad Watch Winder, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the winder is unplugged before cleaning. Keep the winder in a clean, dust-free environment to prevent debris from affecting its operation.
Troubleshooting
Watch Not Winding
If a watch is not winding, verify the power connection and ensure the winder is turned on. Check that the watch is securely seated on the pillow and that the correct TPD and directional settings are selected for your watch model. Some watches may require specific TPD or directional settings; consult your watch's manual.
Unusual Noise
A slight hum from the motor is normal during operation. If unusual or excessive noise occurs, ensure the winder is on a stable, flat surface and that no objects are obstructing the rotating mechanism. If the issue persists, contact customer support.
Watch Damage Prevention
This winder is designed with individual modules to prevent watches from hitting each other during operation. To avoid potential damage, always place only one watch per winder module.
Image: A visual warning demonstrating the risk of damage when two watches are placed on a single winding motor, emphasizing the importance of using one watch per module.
Product Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 7 x 9.5 x 10 inches |
| Item Weight | 6.24 Pounds |
| Item Model Number | G088-Black |
| Manufacturer | Versa |
| Power Input | 110-240V (Power adapter included) |
| Winding Capacity | 4 automatic watches (independent control) |
| TPD Settings | 650, 850, 1050, 1250 |
| Directional Settings | Clockwise, Counter-Clockwise, Bi-directional |
Warranty and Support
The Versa Quad Watch Winder comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures proper functioning under normal use. Please retain your proof of purchase for warranty claims.
For assistance, technical support, or warranty inquiries, please contact Versa customer support through the retailer where the product was purchased or visit the official Versa website for contact information.
Extended Protection Plans
Extended protection plans are available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind and can cover repairs or replacements for a longer duration.
- 2-Year Protection Plan: Available for $18.99
- 3-Year Protection Plan: Available for $25.99
- Complete Protect: Monthly plan for $16.99, covering all eligible past and future purchases.
