Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your MICROTEK UPS-XP 2300 (24V) Pure Sine Wave Inverter. Please read this manual thoroughly before using the product and retain it for future reference.
The MICROTEK UPS-XP 2300 (24V) is a heavy-duty pure sine wave inverter designed to provide reliable power backup for homes, offices, and shops. It features advanced digital technology, intelligent load sensing, and comprehensive protection for various appliances.
Setup and Installation
1. Unpacking and Inspection
- Carefully unpack the inverter and check for any physical damage.
- Ensure all components listed in the "What's in the Box" section are present.
- Retain the packaging material for future transportation or service needs.
2. Placement
- Place the inverter in a well-ventilated area, away from direct sunlight, moisture, and flammable materials.
- Ensure adequate clearance around the unit for proper airflow.
- Avoid placing the inverter near heat sources or in dusty environments.
3. Battery Connection
The UPS-XP 2300 (24V) inverter requires a 24V battery bank. This typically involves connecting two 12V batteries in series, or a single 24V battery. The inverter is compatible with 12V batteries with capacities between 100 Ah and 200 Ah. It supports various battery types including Flat Plate, Tubular, and SMF batteries.
- Ensure the inverter is switched OFF before connecting batteries.
- Connect the positive (+) terminal of the first 12V battery to the negative (-) terminal of the second 12V battery (for series connection).
- Connect the remaining positive (+) terminal of the battery bank to the positive (+) terminal of the inverter.
- Connect the remaining negative (-) terminal of the battery bank to the negative (-) terminal of the inverter.
- Ensure all connections are tight and secure to prevent sparking or poor performance.
Image: Microtek Inverter and compatible battery. This image illustrates the inverter's capability for fast charging and heavy load handling, emphasizing the use of Microtek batteries for optimal performance.
4. Mains Power Connection
- Connect the inverter's input power cord to a properly grounded AC mains outlet.
- Ensure the mains voltage is within the specified operating range of the inverter.
5. Load Connection
- Connect your appliances (lights, fans, computers, refrigerators, etc.) to the output sockets of the inverter.
- Do not exceed the maximum rated load of 1600 Watts.
Operating Instructions
1. Powering On/Off
- To power on the inverter, press the ON/OFF switch located on the front panel.
- To power off, press the ON/OFF switch again.
2. Digital LED Display
The inverter features a digital LED display that provides real-time status information. This includes:
- Mains ON: Indicates that the inverter is receiving power from the AC mains.
- UPS ON: Indicates that the inverter is providing power to the connected load.
- Charging: Shows when the battery is being charged.
- Battery Low: Warns when the battery charge is critically low.
- Overload: Indicates that the connected load exceeds the inverter's capacity.
- Fault Indication: Signals various operational faults.
- Power Back-up/Battery Charging Time: Displays estimated time in hours and minutes.
Image: Microtek Intelligent UPS with Load Sensing Capability. This image highlights the various indicators on the inverter's display, such as Fault Indication, UPS ON, Overload, Mains ON, Charging, and Battery Low, demonstrating its intelligent monitoring features.
3. Operating Modes
The inverter operates in two primary modes:
- UPS Mode: Provides uninterrupted power supply to connected appliances during power outages.
- Inverter Mode: Converts DC power from batteries to AC power for appliances.
4. Appliance Compatibility
The UPS-XP 2300 (24V) provides complete protection and power for a range of household and office appliances, including:
- Fans
- LED/CFL Lights
- Computers & Laptops
- Refrigerators
- Mixer Grinders
- And other similar electrical loads within the specified wattage.
Image: Microtek Inverter providing complete protection for a range of appliances. This image demonstrates the inverter's versatility in powering common household items like fans, lights, computers, refrigerators, and mixer grinders.
5. Safety Features
The inverter is equipped with several safety features:
- In-built Bypass Switch: Allows direct mains supply to connected loads in case of inverter malfunction or maintenance.
- Fast Charging at 90V: Ensures quick battery charging even at low input voltages.
- Total Safety from Short Circuit: Integrated protection against short circuits.
- In-built MCB: Miniature Circuit Breaker for enhanced safety.
Image: Microtek Inverter highlighting safety features. This image illustrates the inverter's total safety from short circuits with an in-built MCB, fast charging capability, and the presence of an in-built bypass switch.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
1. General Care
- Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
- Ensure ventilation openings are not blocked.
- Avoid spilling liquids on the inverter.
2. Battery Maintenance
- For lead-acid batteries, regularly check the electrolyte level and top up with distilled water as needed.
- Keep battery terminals clean and free from corrosion. Apply petroleum jelly if necessary.
- Ensure batteries are fully charged periodically, especially if the inverter is not used for extended periods.
3. Periodic Checks
- Inspect all cables and connections for any signs of wear or damage.
- Listen for any unusual noises from the inverter or batteries.
Troubleshooting
This section provides solutions to common issues you might encounter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not turning ON | No mains power; Battery not connected or discharged; ON/OFF switch off. | Check mains supply; Ensure battery connections are secure and charged; Turn ON the inverter switch. |
| "Battery Low" indicator ON | Battery discharged; Mains power not available for charging. | Connect to mains power to charge the battery; Reduce load to conserve battery. |
| "Overload" indicator ON | Connected load exceeds inverter capacity. | Disconnect some appliances to reduce the load. |
| Appliances not working in inverter mode | Inverter OFF; Battery discharged; Fault condition. | Check inverter status; Charge battery; Refer to fault indications. |
| Flickering lights or unstable output | Poor battery connection; Inverter internal issue (less common). | Check battery terminals; Contact service if issue persists. |
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | MICROTEK |
| Model Name | UPS-XP 2300 (24V) |
| Model Number | UPS XP 2300 (24V) |
| Electrical Output Waveform | Pure Sine Wave |
| VA Rating | 2000VA (as per product title) |
| Wattage | 1600 Watts |
| Voltage | 24 Volts |
| Battery Compatibility | 2 x 12V batteries (100 Ah - 200 Ah each) or 1 x 24V battery. Supports Flat Plate, Tubular, SMF. |
| Power Source | AC |
| Recommended Uses | Home, Office, Shops |
| Standby Power Shutoff | 90% |
| Item Dimensions (L x W x H) | 42 x 45 x 22 CM |
| Item Weight | 18 Kg (18000 Grams) |
| Colour | Grey |
| Box Contents | 1 Extra Power UPS XP 2300 |
Warranty & Support
1. Product Warranty
The MICROTEK UPS-XP 2300 (24V) Inverter comes with a 2-year warranty from the date of purchase. For detailed terms and conditions of the warranty, please refer to the warranty card supplied along with the product.
Extended warranty plans may be available from third-party providers. For example, 1-Year and 2-Year Extended Warranty Plans by Onsitego are offered.
2. Customer Support
For any technical assistance, service requests, or inquiries, please contact the manufacturer:
- Manufacturer: UNIVERSAL POWER PRODUCT
- Address: PLOT NO. 20 & 20B, Sector-2, Parwanoo Distt : Solan HIMACHAL PRADESH 173220
- Contact Number: +91 7283838383
Please have your product model number (UPS-XP 2300 (24V)) and purchase details ready when contacting support.