Viper 5906V Color Remote Start & Security System User Manual

1. Introduction

The Viper 5906V is a comprehensive 2-way HD Color Security and Remote Start System designed to provide advanced protection and convenience for your vehicle. It features a brilliant OLED color display remote for real-time feedback and control from a significant distance.

2. Key Features

• Extended Range: Control the vehicle from up to 1 mile away using 900 MHz Spread Spectrum Technology. Actual range may vary based on environmental conditions.
• 2-Way Confirmation: Receive real-time status updates and confirmations via the Brilliant OLED Color Display remote.
• Intuitive User Interface: Features a jog wheel for easy navigation and control.
• Rechargeable Battery: The main remote includes a rechargeable battery with a Mini-USB Charging Port.
• Viper SmartStart Compatible: Allows for smartphone control with an optional SmartStart module.
• Multi-Vehicle Control: Capable of controlling up to two cars from a single remote.
• Active Temperature Check: Monitor your vehicle's interior temperature.
• Security Features: Includes Status LED Alerts, Failsafe Starter Kill, Stinger Double Guard Shock Sensor, and Revenger Six-Tone Siren for robust protection.
• Companion Remote: Comes with an additional remote for convenience.

3. Product Components

Figure 3.1: Viper 5906V Color Remote Start & Security System packaging and remotes.

Figure 3.2: Close-up of the Viper 5906V 2-way HD Color Remote with OLED display.

Figure 3.3: Close-up of the Viper 5906V 1-way Companion Remote.

Figure 3.4: All components included in the Viper 5906V system, including the main unit, siren, wiring harnesses, and remotes.

4. Setup and Installation

The Viper 5906V system requires professional installation. Due to the complexity of vehicle wiring and the advanced features of this security and remote start system, attempting self-installation may lead to product damage, vehicle damage, or improper functionality. It is strongly recommended to have this system installed by an experienced and certified automotive electronics technician.

Product does not come with vehicle-specific wire diagrams. Consult with your installer for detailed wiring and configuration specific to your vehicle model.

5. Operating Instructions

5.1. Main Remote (2-Way HD Color Display)

The main remote features an OLED color screen and an intuitive jog wheel for navigation. Functions are confirmed visually on the display and often with audible feedback from the vehicle.

• Arm and Disarm: Use the dedicated lock and unlock buttons to arm and disarm the security system and lock/unlock your car doors. The display will confirm the action.
• Remote Start: Press the remote start button to initiate engine start. The remote will display engine status and interior temperature.
• Auxiliary Functions: The AUX button and jog wheel allow control of various optional functions, such as trunk release.
• Menu Navigation: Rotate the jog wheel to access different menus and settings on the OLED display.

5.2. Companion Remote (1-Way)

The companion remote provides basic 1-way control for common functions.

• Lock/Arm: Press the lock button to lock doors and arm the security system.
• Unlock/Disarm: Press the unlock button to unlock doors and disarm the security system.
• Remote Start: Press the remote start button to activate the engine start function.
• Auxiliary: The AUX button can be configured for additional functions.

6. Maintenance

6.1. Remote Battery Charging

The main 2-way remote features a rechargeable internal battery. To charge, connect a standard Mini-USB cable to the charging port on the remote and a compatible USB power source (e.g., computer USB port, USB wall adapter). The remote's display will indicate charging status.

Battery life is approximately three weeks between charges, and a full recharge takes approximately one hour.

The companion remote requires 1 CR2 battery (not rechargeable).

6.2. General Care

• Keep remotes away from extreme temperatures and direct sunlight.
• Avoid exposing remotes to water or excessive moisture.
• Clean remotes with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

7. Troubleshooting

For most issues, it is recommended to consult with your professional installer. Complex diagnostic and repair procedures should only be performed by qualified technicians.

7.1. Remote Not Responding

• Check the battery level of your 2-way remote and recharge if necessary.
• Ensure you are within the operational range of the system. Obstructions and environmental factors can reduce range.
• Verify that the vehicle's battery is not depleted.

7.2. Security System Triggered Unexpectedly

• The Stinger Double Guard Shock Sensor sensitivity may need adjustment. Consult your installer.
• Ensure all doors, hood, and trunk are securely closed.

7.3. Remote Start Issues

• Confirm the vehicle is in a safe state for remote start (e.g., parking brake engaged, transmission in park for automatic, or proper manual transmission preparation).
• Check for any diagnostic trouble codes (DTCs) in the vehicle that might prevent remote start.

8. Specifications

9. Warranty and Support

9.1. Warranty Information

The Viper 5906V system comes with a One Year 3 Kings Warranty. For specific terms and conditions of this warranty, please refer to the documentation provided with your purchase or contact the seller directly.

Legal Disclaimer: Sound Security Online is not affiliated with Viper nor do they represent themselves as their authorized distributor. Merchandise offered carries Sound Security Online warranty only. Their name and trademark is for trademark recognition purpose only. Sound Security Online is not using logo nor they intend to free ride on their trademark.

9.2. Customer Support

For technical assistance, installation inquiries, or warranty claims, please contact your authorized Viper dealer or the point of purchase. Professional installation is crucial for proper system operation and support.