Corona SL 4364

Download PDF
Contents

Corona Tools DualLINK Extendable Bypass Loppers

Model: SL 4364

1. Introduction

Thank you for choosing the Corona Tools DualLINK Extendable Bypass Loppers, Model SL 4364. This manual provides essential information for the safe and effective operation, maintenance, and care of your new loppers. Please read this manual thoroughly before first use and retain it for future reference. These loppers are designed for pruning branches up to 1 3/4 inches in diameter, featuring extendable handles for increased reach and leverage.

2. Product Overview and Features

The Corona DualLINK Extendable Bypass Loppers are engineered for efficient and comfortable pruning. Key features include:

  • Extendable Handles: Handles extend from 27 1/2 inches to 37 1/2 inches for extended reach and leverage.
  • Power SOURCE Cutting Action: Utilizes DualLINK power-compounding technology for easier cutting of limbs up to 1 3/4 inches.
  • Durable Construction: Features strong, trapezoid steel handles for long-lasting performance.
  • ShockGUARD Bumper System: Reduces fatigue during prolonged use.
  • ComfortGEL+ Grip: Ergonomically designed grips provide enhanced comfort and control.
  • Two-Zone Blade: A specialized blade design for efficiently cutting both small and large branches.
Corona DualLINK Extendable Bypass Loppers SL 4364

Figure 1: The Corona DualLINK Extendable Bypass Loppers (Model SL 4364) in their fully assembled state, featuring silver handles with red ComfortGEL+ grips and a black and silver blade head.

Close-up of Corona Lopper's 4-Bar Linkage and ShockGUARD Bumper

Figure 2: A detailed view of the lopper's head, highlighting the 4-Bar Linkage for PowerSOURCE cutting action and the orange ShockGUARD Bumper designed to reduce user fatigue.

Corona Lopper's Two-Zone Blade for Small and Large Cuts

Figure 3: A close-up of the lopper's bypass blade, illustrating its two-zone design optimized for efficiently cutting both small and large branches.

Corona Lopper's ComfortGEL+ Grip

Figure 4: A close-up of the red ComfortGEL+ grip on one of the lopper handles, designed for enhanced comfort and control during use.

3. Setup

Your Corona DualLINK Extendable Bypass Loppers come pre-assembled and ready for use. No complex assembly is required.

3.1 Extending the Handles

  1. Locate the orange locking mechanisms on each handle.
  2. Push the locking mechanism away from the blade head to unlock the handle.
  3. Gently pull the handle outwards to extend it to the desired length. The handles can extend up to 37 1/2 inches.
  4. Once the desired length is achieved, push the locking mechanism back towards the blade head to secure the handle in place. Ensure both handles are securely locked before use.

3.2 Retracting the Handles

  1. Push the locking mechanism away from the blade head to unlock the handle.
  2. Push the handle inwards until it reaches its fully retracted position (27 1/2 inches).
  3. Push the locking mechanism back towards the blade head to secure the handle.

4. Operating Instructions

Always wear appropriate safety gear, including gloves and eye protection, when operating loppers.

4.1 General Pruning Tips

  • Inspect the branch: Ensure the branch to be cut is within the lopper's capacity (up to 1 3/4 inches). Attempting to cut larger branches can damage the tool or cause injury.
  • Positioning: Place the branch as deep as possible into the jaws of the loppers, close to the pivot point, for maximum leverage.
  • Clean cuts: Aim for a single, clean cut. Avoid twisting or wrenching the loppers during the cut.
  • Bypass action: Bypass loppers are designed for making clean cuts on live wood, with one blade passing by the other.

4.2 Using the Two-Zone Blade

The loppers feature a two-zone blade design:

  • Tip Zone: Use the tip of the blade for smaller, more delicate cuts.
  • Base Zone: Use the base of the blade, closer to the pivot, for larger, tougher branches to utilize the full power of the DualLINK mechanism.

4.3 Safety Precautions

  • Keep hands and fingers clear of the blades at all times.
  • Do not use loppers near electrical wires.
  • Ensure stable footing when operating, especially when using extended handles.
  • Store loppers in a safe place, out of reach of children.

5. Maintenance

Regular maintenance will prolong the life and performance of your loppers.

5.1 Cleaning

  • After each use, clean sap and debris from the blades and pivot area using a stiff brush and warm, soapy water.
  • Rinse thoroughly and dry completely to prevent rust.

5.2 Lubrication

  • Apply a light machine oil to the pivot points and blade surfaces periodically, especially after cleaning or if the action feels stiff.

5.3 Sharpening

  • The blades may require sharpening over time. Use a sharpening stone or file designed for garden tools.
  • Follow the original bevel angle of the blade. Sharpen only the cutting edge, not the bypass blade.
  • If you are unsure, consult a professional for sharpening services.

5.4 Storage

  • Store loppers in a dry place to prevent rust.
  • Consider applying a thin coat of oil to the blades before long-term storage.
  • Keep the blades closed and secured when not in use.

6. Troubleshooting

  • Problem: Loppers are difficult to close or open.
    Solution: Clean the pivot area thoroughly to remove any debris or sap. Apply a lubricating oil to the pivot points. Check if any parts are bent or damaged.
  • Problem: Blades are not cutting cleanly.
    Solution: The blades may be dull. Sharpen the cutting blade as described in Section 5.3. Ensure the blades are clean and free of sap buildup.
  • Problem: Handles are not extending or retracting smoothly.
    Solution: Ensure the locking mechanisms are fully disengaged. Clean any dirt or debris from the telescoping sections of the handles. Apply a dry lubricant if necessary.
  • Problem: Excessive play in the handles or blade.
    Solution: Check all bolts and fasteners for tightness. Do not overtighten. If the issue persists, contact customer support.

7. Specifications

BrandCorona
Model NumberSL 4364
StyleExtendable DualLINK
ColorSilver
Blade TypeBypass
Blade MaterialAlloy Steel
Handle MaterialAlloy Steel
Cutting CapacityUp to 1 3/4 inches (1.75 inches)
Handle Extension Range27 1/2 inches to 37 1/2 inches
Item Weight4.01 pounds
Product Dimensions (collapsed)30 x 10 x 2 inches
UPC038313043643

8. Warranty and Support

8.1 Limited Lifetime Warranty

Corona Tools offers a limited lifetime warranty on this product, covering defects in material and workmanship. This warranty does not cover normal wear and tear, misuse, or damage resulting from improper maintenance. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For further assistance, questions, or warranty claims, please contact Corona Tools customer service. Refer to the official Corona Tools website for the most current contact information.

© 2025 Corona Tools. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.