Sena Momentum Pro Dual Bluetooth Camera Helmet Instruction Manual

1. Introduction

Welcome to the Sena Momentum Pro Dual Bluetooth Camera Helmet instruction manual. This document provides essential information for the proper setup, operation, and maintenance of your new helmet. The Momentum Pro combines advanced safety features with integrated Bluetooth communication and a high-definition action camera, offering a comprehensive solution for riders.

Key features include:

• Integrated QHD (1440p, 30fps) / FHD (1080p, 60fps) action camera with 135-degree field of view.
• Bluetooth communication system for intercom, phone calls, and music.
• Streamlined design with easy-to-access camera button.
• Wi-Fi connectivity for instant footage preview and download.
• DOT Certified safety rating.

2. Setup

Before your first ride, ensure your Sena Momentum Pro helmet is properly set up and charged.

2.1 Initial Charging

Connect the helmet to a power source using the provided USB cable. The LED indicator will show charging status. A full charge is recommended before first use to optimize battery life.

2.2 Powering On/Off

• To Power On: Press and hold the main button for approximately 3 seconds until you hear an ascending tone.
• To Power Off: Press and hold the main button for approximately 5 seconds until you hear a descending tone.

2.3 Bluetooth Pairing

To pair your helmet with a smartphone or other Bluetooth device:

1. With the helmet powered off, press and hold the main button for 10 seconds until the LED flashes red and blue, indicating pairing mode.
2. On your smartphone, go to Bluetooth settings and select "Sena Momentum Pro" from the list of available devices.
3. Once paired, the LED will turn blue.

Image: The Sena Momentum Pro Dual Bluetooth Camera Helmet in glossy white, showcasing its integrated camera at the top and the sleek visor design.

3. Operating

This section covers the basic operation of the helmet's integrated features.

3.1 Bluetooth Communication

• Phone Calls: Tap the main button to answer/end a call. Double-tap to reject.
• Music Playback: Tap the main button to play/pause music. Use the jog dial to adjust volume or skip tracks.
• Intercom: Initiate intercom conversations with other Sena devices by tapping the intercom button. Refer to the full user guide for multi-way intercom setup.

3.2 Integrated Camera Operation

The QHD camera is designed for easy recording of your rides.

• Start/Stop Recording: Press the dedicated camera button located at the top of the helmet. A voice prompt will confirm recording status.
• Wi-Fi Connectivity: Activate Wi-Fi on the helmet and connect via the Sena Camera App on your smartphone to preview footage, download files, and configure camera settings.
• Video Looping: The camera supports looping video recording, ensuring continuous capture even when storage is full by overwriting the oldest files.

Note: No official product videos were available from the seller in the provided data to embed in this manual.

4. Maintenance

Proper maintenance ensures the longevity and performance of your helmet.

4.1 Cleaning the Helmet

• Exterior: Use a soft cloth and mild soap with water. Avoid harsh chemicals or abrasive cleaners.
• Visor: Clean with a soft, damp cloth and specialized visor cleaner if available. Do not use paper towels as they can scratch the surface.
• Interior Padding: Removable padding can be hand-washed with mild soap and air-dried. Ensure it is completely dry before reinserting.

4.2 Battery Care

• Charge the battery regularly, even if not in frequent use, to prevent deep discharge.
• Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures.

4.3 Firmware Updates

Periodically check the Sena website for firmware updates. Updates can improve performance, add new features, and fix bugs. Use the Sena Device Manager software on your computer to perform updates.

5. Troubleshooting

This section addresses common issues you might encounter.

• Helmet Not Powering On: Ensure the battery is charged. Connect to a power source and try again. If the issue persists, perform a factory reset (refer to the full user guide for instructions).
• Bluetooth Connection Issues: Ensure the helmet is in pairing mode. Delete previous pairings on your smartphone and try re-pairing. Move closer to your device.
• Camera Not Recording: Check if the SD card is properly inserted and has sufficient free space. Ensure the camera button is pressed firmly. Format the SD card if necessary (this will erase all data).
• No Audio: Check volume levels on both the helmet and your connected device. Ensure the helmet is properly connected via Bluetooth.

For more detailed troubleshooting, please consult the comprehensive Sena Momentum Pro User's Guide available on the Sena website.

6. Specifications

7. Warranty and Support

Sena products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Sena website.

For technical support, firmware updates, and access to the complete user manual, please visit the Sena support page:

www.sena.com/support