NOVY 245999 Separated Chimney Motor Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your NOVY 245999 separated chimney motor. This motor is designed for use with compatible extractor hoods, offering efficient air extraction with integrated noise reduction.

2. Safety Information

• Read all instructions carefully before installation and use.
• Installation must be performed by a qualified technician in accordance with local regulations and electrical codes.
• Always disconnect the power supply before performing any installation, maintenance, or cleaning.
• Ensure the electrical supply matches the voltage specified on the product label (230 Volt).
• Do not modify the appliance. Any modifications may void the warranty and create safety hazards.
• Keep packaging materials out of reach of children.

3. Product Overview

The NOVY 245999 is a separated motor unit designed to be installed remotely from the extractor hood, contributing to quieter operation. It features a robust construction and an integrated silencer.

This image displays the NOVY 245999 separated chimney motor, a black rectangular unit with a circular exhaust port on top and electrical connections visible at the bottom. The design incorporates a silencer for reduced noise operation.

4. Setup and Installation

The NOVY 245999 motor is intended for remote installation, typically in an attic, false ceiling, or an adjacent room, to minimize noise in the kitchen area. Professional installation is strongly recommended.

4.1. Mounting

• Choose a stable, vibration-free location for mounting the motor.
• Ensure adequate space around the motor for ventilation and future maintenance access.
• Secure the motor firmly using appropriate fasteners for the mounting surface.

4.2. Ducting Connection

• Connect the motor's inlet to the extractor hood's ducting system.
• Connect the motor's outlet to the external exhaust ducting.
• Use rigid, smooth-walled ducting with the recommended diameter to ensure optimal airflow and minimize noise.
• Ensure all ducting connections are airtight to prevent air leakage and maintain efficiency.

4.3. Electrical Connection

• Ensure the main power supply is disconnected before making any electrical connections.
• Connect the motor to a dedicated electrical circuit as per local electrical codes.
• Verify that the voltage and frequency of the power supply match the motor's requirements (230 Volt).
• All wiring must be properly insulated and secured.

5. Operating Instructions

The NOVY 245999 motor is controlled via the connected extractor hood's control panel. Refer to your extractor hood's manual for specific operating instructions.

• Power On/Off: The motor will activate when the extractor hood is turned on.
• Speed Settings: The motor offers 3 speed settings, which are typically selected via the extractor hood's control panel to adjust extraction power.
• Optimal Use: For best results, activate the extractor hood a few minutes before cooking and allow it to run for a short period after cooking to clear residual odors and steam.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your NOVY 245999 motor.

6.1. Cleaning

• Before any cleaning, ensure the motor is disconnected from the main power supply.
• Wipe the exterior surfaces of the motor with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Ensure no liquids enter the motor housing.

6.2. Inspection

• Periodically inspect the ducting connections for any signs of leakage or damage.
• Check electrical connections for security and integrity.
• If any unusual noises or vibrations occur, disconnect power and consult a qualified technician.

7. Troubleshooting

Before contacting customer support, review the following common issues and solutions:

8. Specifications

Technical data for the NOVY 245999 separated chimney motor:

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or service, please contact NOVY customer service or your authorized service provider. Ensure you have your model number (245999) and proof of purchase available when seeking support.