Maax 105797-000-002-100

Maax Sax 5 ft. Freestanding Bathtub User Manual

Model: 105797-000-002-100

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your Maax Sax 5 ft. Freestanding Bathtub. Please read all instructions carefully before beginning installation or use to ensure proper function and longevity of your product.

Important Safety Information:

  • Ensure all local plumbing and building codes are followed during installation.
  • Installation should be performed by a qualified professional.
  • Do not use abrasive cleaners or tools that could damage the bathtub surface.
  • Always test water temperature before entering the bathtub to prevent scalding.
Maax Sax freestanding bathtub installed in a modern bathroom

Image 1.1: The Maax Sax freestanding bathtub in a bathroom setting, showcasing its design.

2. Setup and Installation

The Maax Sax bathtub is designed for freestanding installation. Proper preparation and installation are crucial for optimal performance and stability.

2.1 Pre-Installation Checks

  • Verify that the floor can support the weight of the bathtub when filled with water and a bather (approximately 140 lbs dry weight + 44.9 gallons * 8.34 lbs/gallon = ~374 lbs water + bather weight).
  • Ensure access to plumbing for water supply and drain connections.
  • Unpack the bathtub carefully and inspect for any shipping damage. Report any damage immediately.

2.2 Installation Steps

  1. Positioning: Carefully place the bathtub in its desired location.
  2. Leveling: The bathtub is equipped with 4 adjustable leveling legs. Use a level to ensure the bathtub is perfectly level on all sides. Adjust the legs as necessary.
  3. Drain Connection: Connect the bathtub's reversible drain to the floor drain. The bathtub includes a 3-inch above-the-floor rough for easier installation. Ensure all connections are watertight.
  4. Faucet Installation (if applicable): If installing a deck-mounted faucet, follow the faucet manufacturer's instructions for drilling and mounting.
  5. Water Supply: Connect hot and cold water lines to the faucet (if applicable).
  6. Leak Test: Fill the bathtub with water and inspect all drain and supply connections for leaks.
Maax Sax bathtub with a deck-mounted faucet installed

Image 2.1: Side view of the Maax Sax bathtub, illustrating a typical faucet installation.

3. Operating Instructions

Using your Maax Sax bathtub is straightforward. Follow these guidelines for a safe and enjoyable bathing experience.

3.1 Filling the Bathtub

  • Ensure the drain stopper is closed.
  • Turn on the water supply to the desired temperature. Always test the water temperature with your hand before entering the tub to prevent burns.
  • Fill the bathtub to a comfortable level, ensuring not to exceed the overflow drain. The bathtub has a capacity of 44.9 gallons.

3.2 Draining the Bathtub

  • Open the drain stopper to allow water to empty from the bathtub.
  • Ensure all water has drained completely after use.
Top-down view of the Maax Sax bathtub interior, showing the drain and overflow

Image 3.1: Overhead view of the bathtub interior, highlighting the drain and bathing well.

4. Maintenance and Care

Regular cleaning and proper care will help maintain the appearance and extend the life of your Maax Sax bathtub.

4.1 Cleaning the Bathtub

  • Use a soft cloth or sponge with a mild, non-abrasive bathroom cleaner.
  • Avoid using abrasive powders, scouring pads, or harsh chemical cleaners (e.g., acetone, paint thinner, strong acids or bases) as these can damage the surface finish.
  • Rinse the bathtub thoroughly with clean water after cleaning to remove all cleaner residue.
  • For stubborn stains, consult the cleaner manufacturer's instructions for use on acrylic or similar bathtub surfaces.

4.2 General Care

  • Prevent scratches by avoiding sharp objects in the bathtub.
  • Do not place hot items directly on the bathtub surface without protection.

5. Troubleshooting

This section addresses common issues you might encounter with your bathtub.

ProblemPossible CauseSolution
Water leaks from drain connectionLoose connection, damaged sealTighten drain connections. Inspect and replace seals if damaged. Consult a plumber if necessary.
Bathtub is not levelUneven floor, leveling legs not adjustedAdjust the 4 leveling legs until the bathtub is stable and level.
Slow drainingDrain obstructionRemove drain stopper and clear any debris. Use a drain snake if necessary. Avoid harsh chemical drain cleaners.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Maax customer support or a qualified professional.

6. Specifications

FeatureDetail
Model Number105797-000-002-100
BrandMaax
Dimensions (L x W x H)60" x 32" x 25"
Capacity44.9 Gallons
MaterialMetal (as per product specifications)
Installation TypeFreestanding
Drain TypeReversible Drain
Item Weight (Empty)140 Pounds
ColorWhite
Special Features3-inch above-the-floor rough, 4 adjustable leveling legs, maximized bathing well with high backrest
Maax Sax freestanding bathtub in a corner of a bathroom, highlighting its dimensions

Image 6.1: The Maax Sax bathtub's freestanding design, suitable for various bathroom layouts.

7. Warranty and Support

For specific warranty information, please refer to the warranty card included with your product or visit the official Maax website. Keep your proof of purchase for warranty claims.

Customer Support:

If you require assistance with installation, operation, or troubleshooting, please contact Maax customer support. Contact details can typically be found on the manufacturer's website or in the product packaging.

You can also refer to the Amazon Customer Support page for general assistance related to your purchase.

© 2024 Maax. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.