Introduction
Thank you for choosing the NORDRIVE N15012 Snap-Fit Steel Telescopic Roof Bars by Lampa. These roof bars are designed for versatility and durability, providing a reliable solution for transporting goods on your vehicle's roof. This manual provides essential information for the correct installation, safe operation, and proper maintenance of your new roof bars.
Safety Information
- Always read and understand all instructions before installation and use.
- Do not exceed the maximum load capacity of 75 kg for these roof bars. Also, check your vehicle's owner's manual for its maximum roof load capacity and never exceed the lower of the two limits.
- Ensure all components are securely fastened before driving. Regularly check the tightness of all bolts and straps, especially after the first few kilometers of driving and periodically thereafter.
- Distribute the load evenly on the roof bars. Secure all items firmly to prevent shifting during transit.
- Driving with roof bars and loaded items can affect vehicle handling, braking, and fuel consumption. Adjust your driving style accordingly.
- Be aware of the increased vehicle height when loaded, especially when entering garages, car washes, or low overhead areas.
- Remove roof bars and accessories when not in use to reduce wind noise and improve fuel efficiency.
- Keep children away from the product during installation and removal.
Components List
The NORDRIVE N15012 Snap-Fit Steel Telescopic Roof Bars package includes the following items:
- 2 x Telescopic Steel Roof Bars (main item)
- All necessary mounting hardware for universal automotive installation.
Note: Please inspect all components upon receipt to ensure no parts are missing or damaged.
Setup and Installation
The NORDRIVE N15012 roof bars feature a snap-fit design and telescopic adjustment for universal automotive installation. Follow these steps for proper setup:
1. Unpack and Inspect Components
Carefully remove all items from the packaging. Verify that all components listed in the "Components List" section are present and undamaged. Familiarize yourself with the main parts of the roof bars.

Figure 1: Overview of the NORDRIVE N15012 Snap-Fit Steel Telescopic Roof Bars. This image shows the two black steel bars with their end caps and mounting points, ready for installation.
2. Understand Bar Dimensions and Profile
The roof bars have an oval cross-section, measuring approximately 60 mm in width and 30 mm in height. This profile is designed for aerodynamic efficiency and strength.

Figure 2: Detailed cross-section view of the roof bar, indicating a width of 60 mm and a height of 30 mm. This illustrates the bar's profile for compatibility with accessories.
3. Adjust Telescopic Length
The roof bars are telescopic, allowing adjustment from 100 cm to 136 cm (Mis. 2). Identify the adjustment mechanism, typically located at the ends of the bars. Loosen the locking mechanism, extend or retract the bar to the desired length to fit your vehicle's roof width, and then securely tighten the locking mechanism. Ensure both bars are adjusted to the same length.

Figure 3: Diagram showing the telescopic adjustment range of the roof bars (100-136 cm) and the end cap design. The circular inset indicates a rotation range of 70-140 mm for the mounting feet, allowing for flexible fitment.
4. Mount to Vehicle Roof
These roof bars are designed for universal automotive installation, typically using a strap or clamp-on system (Type of mounting: Cinghia, which translates to Strap). Refer to your vehicle's manual for specific roof bar mounting points or instructions. Position the bars correctly on your vehicle's roof, ensuring they are parallel and evenly spaced. Secure the mounting feet to your vehicle's roof rails or designated attachment points using the provided hardware. The rotating feet (indicated by 70-140 mm in Figure 3) allow for adaptation to various roof rail shapes.
Important: Double-check all connections for tightness before use. Gently pull and push on the bars to ensure they are firmly attached and do not wobble.
Operating Instructions
Loading the Roof Bars
- Ensure the load is evenly distributed across both roof bars and centered on the vehicle.
- Secure all items using appropriate straps, nets, or specialized carriers (e.g., bike racks, ski carriers, roof boxes).
- The maximum load capacity for these roof bars is 75 kg. Never exceed this limit.
- For long items, ensure they do not obstruct your view or extend dangerously beyond the vehicle's dimensions.
Driving with Loaded Roof Bars
- Drive at reduced speeds, especially in crosswinds, during braking, and when cornering.
- Avoid sudden maneuvers.
- Check the security of the load and the roof bars frequently during long journeys.
- Be mindful of increased vehicle height and width.
Maintenance
- Regularly inspect the roof bars for any signs of wear, damage, or corrosion.
- Clean the roof bars with mild soap and water. Avoid harsh chemicals that could damage the finish.
- Periodically check all bolts, nuts, and straps for tightness. Re-tighten as necessary.
- If the roof bars are removed, store them in a dry place away from direct sunlight and extreme temperatures.
- Ensure the telescopic mechanism operates smoothly. Lubricate moving parts if necessary with a suitable lubricant.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Roof bars feel loose after installation. | Mounting hardware not sufficiently tightened. | Re-tighten all bolts and straps according to installation instructions. Check frequently. |
| Excessive wind noise during driving. | Improper bar positioning or aerodynamic drag from load. | Ensure bars are correctly positioned and load is streamlined. Consider removing bars when not in use. |
| Telescopic mechanism is stiff. | Dirt or lack of lubrication. | Clean the mechanism and apply a suitable lubricant (e.g., silicone spray). |
| Difficulty fitting bars to vehicle. | Incorrect telescopic adjustment or incompatible vehicle type. | Verify the telescopic length is set correctly (100-136 cm). Ensure your vehicle is compatible with universal strap-type roof bars. |
Specifications
| Model Number: | N15012 |
| Brand: | Lampa (NORDRIVE) |
| Material: | Steel Alloy |
| Telescopic Length: | 100 cm to 136 cm (Mis. 2) |
| Bar Dimensions (LxWxH): | Approximately 109 x 16.5 x 9.5 cm (overall item dimensions) |
| Bar Cross-section (WxH): | 60 mm x 30 mm |
| Load Capacity: | 75 kg |
| Mounting Type: | Strap (Cinghia) |
| Vehicle Service Type: | Automobile (Universal Installation) |
| Item Weight: | 15.79 lbs (approx. 7.16 kg) |
| GTIN: | 08034057150120 |
| ASIN: | B00GMHZ01Y |
Warranty Information
Lampa products are manufactured to high-quality standards. For specific warranty details regarding your NORDRIVE N15012 roof bars, please refer to the warranty documentation included with your purchase or visit the official Lampa website. Keep your proof of purchase for any warranty claims.
Customer Support
Should you have any questions, require assistance with installation, or encounter any issues with your NORDRIVE N15012 Snap-Fit Steel Telescopic Roof Bars, please contact Lampa customer support. You can find contact information on the official Lampa website or through your retailer.
Visit the Lampa Store: Lampa Official Store