Gembird WNP-RP-002 WiFi Repeater 300 Mbps User Manual

1. Introduction

The Gembird WNP-RP-002 is a compact 300 Mbps WiFi Repeater designed to extend the coverage of your existing wireless network. It eliminates Wi-Fi dead zones and provides a stronger, more reliable signal in areas with weak coverage. This device supports the IEEE 802.11b/g/n wireless standards and operates on the 2.4 GHz frequency band, offering a data transfer rate of up to 300 Megabits per second. It features a WPS function for easy setup and an Ethernet port for wired connectivity.

2. Package Contents

Please check the package for the following items:

• Gembird WNP-RP-002 WiFi Repeater Unit
• User Manual (this document)

Image: Front view of the Gembird WNP-RP-002 WiFi Repeater packaging, showing the device and key features.

3. Physical Overview

The Gembird WNP-RP-002 features a minimalist design with essential indicators and controls.

Image: Front view of the Gembird WNP-RP-002 WiFi Repeater. Visible are the Gembird logo, a Wi-Fi signal strength indicator, and a circular button, which serves as the WPS button and status indicator.

3.1. Components

• Power Plug: Integrated directly into the device for direct wall socket connection.
• WPS Button / Status Indicator: A multi-function button for quick setup and displaying device status.
• Wi-Fi Signal Indicator: Lights up to show the strength of the Wi-Fi signal.
• Ethernet Port (RJ45): Located on the bottom or side, for wired connection to a device or router.
• Reset Button: A small, recessed button (usually requiring a pin) to restore factory default settings.

Image: Side view of the Gembird WNP-RP-002 WiFi Repeater, highlighting its integrated power plug for direct wall socket insertion.

4. Installation & Setup

The Gembird WNP-RP-002 can be set up using two primary methods: WPS (Wi-Fi Protected Setup) or via a web browser interface.

4.1. Choosing a Location

Place the repeater in an area between your router and the location where you need improved Wi-Fi coverage. Ensure it is within the range of your existing router's Wi-Fi signal. Avoid placing it near large metal objects, microwave ovens, or other devices that may cause interference.

4.2. Setup via WPS (Recommended for quick setup)

1. Plug the Gembird WNP-RP-002 into a power outlet. Wait for the status indicator light to stabilize (it may blink initially).
2. Within two minutes, press the WPS button on your main Wi-Fi router.
3. Immediately after, press the WPS button on the Gembird WNP-RP-002.
4. Wait for the status indicator on the repeater to show a solid light, indicating a successful connection. This may take a few moments.
5. The repeater will now broadcast an extended Wi-Fi network with the same name (SSID) as your main router, or with an '_EXT' suffix.

4.3. Setup via Web Browser (For advanced configuration or if WPS fails)

1. Plug the Gembird WNP-RP-002 into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (usually named something like 'Wireless-N' or 'Gembird_Repeater'). The default password might be printed on the device or in the manual. Alternatively, connect your computer to the repeater's Ethernet port using an Ethernet cable.
3. Open a web browser (e.g., Chrome, Firefox, Edge) and enter the default IP address of the repeater (commonly 192.168.10.1 or 192.168.0.1). Refer to the device label or manual for the exact IP address.
4. Log in using the default username and password (often admin for both).
5. Follow the on-screen wizard to select your main Wi-Fi network, enter its password, and configure the repeater's settings. You can usually choose to keep the same SSID or create a new one for the extended network.
6. Save the settings and restart the repeater if prompted.
7. Once restarted, the repeater will extend your Wi-Fi network.

5. Operating the Repeater

Once successfully configured, the Gembird WNP-RP-002 operates automatically. It will continuously extend your Wi-Fi signal. Devices can connect to the extended network just as they would to any other Wi-Fi network.

5.1. LED Indicators

• Solid Light: Indicates a stable connection and proper operation.
• Blinking Light: May indicate a connection attempt, data transfer, or an error state depending on the pattern. Refer to the specific blinking patterns in the full manual if available.

5.2. Connecting Devices

Search for available Wi-Fi networks on your device (smartphone, tablet, laptop). Select the extended network (which might have the same name as your main router or an '_EXT' suffix) and enter the Wi-Fi password of your main router.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your repeater.

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
• Placement: Ensure adequate ventilation around the device. Avoid covering it or placing it in enclosed spaces.
• Firmware Updates: Periodically check the Gembird official website for any available firmware updates. Updating firmware can improve performance and security.
• Resetting to Factory Defaults: If you encounter persistent issues or forget your configuration settings, you can reset the device. Use a paperclip or similar pointed object to press and hold the recessed Reset button for approximately 5-10 seconds until the lights flash. The device will then revert to its original factory settings, requiring re-configuration.

7. Troubleshooting

If you experience issues with your Gembird WNP-RP-002, try the following troubleshooting steps:

• No Power: Ensure the repeater is securely plugged into a working power outlet. Check if the outlet is receiving power.
• No Internet Connection:
  • Verify that your main router has an active internet connection.
  • Check the repeater's placement. It might be too far from the main router. Try moving it closer.
  • Perform a factory reset and reconfigure the repeater.
• Slow Speed:
  • Ensure the repeater is placed optimally, not too far from the router or the devices connecting to it.
  • Check for interference from other electronic devices.
  • Confirm your main router is providing a strong signal.
• Difficulty Configuring:
  • If WPS fails, try the web browser setup method.
  • Ensure you are entering the correct Wi-Fi password for your main router.
  • If accessing the web interface, double-check the IP address and login credentials. Try clearing your browser's cache.
  • Perform a factory reset and attempt configuration again.
• Repeater Keeps Disconnecting: This could indicate poor signal strength from the main router. Relocate the repeater to a spot with better signal reception.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Gembird products typically come with a limited warranty against defects in materials and workmanship.

For technical support, frequently asked questions, or to download the latest firmware, please visit the official Gembird website or contact their customer service department. Contact details can usually be found on the product packaging or the official website.