1. Introduction
This manual provides essential information for the setup, operation, and maintenance of your URC MX-780 Universal Remote Control. The MX-780 is designed to provide comprehensive control over various home entertainment devices, featuring advanced IR/RF capabilities and a color OLED display.
2. Product Overview
The URC MX-780 is a sophisticated wand-style universal remote control. It features a 1.5-inch color OLED display, dedicated hard buttons in red, green, yellow, and blue, and operates on 418 MHz narrow-band RF. It is capable of controlling up to 40 devices and includes a sleep timer function. The remote is powered by four AA alkaline batteries and is programmed via PC using URC's CCP software.
Figure 2.1: Front view of the URC MX-780 Universal Remote Control, showcasing its OLED display and array of control buttons.
3. Setup
3.1 Battery Installation
The MX-780 remote control requires four (4) AA alkaline batteries for operation. To install the batteries, locate the battery compartment on the rear of the remote. Open the cover, insert the batteries according to the polarity indicators (+/-), and then securely close the cover.
3.2 Programming the Remote
The URC MX-780 is a professional-grade universal remote control that requires programming via a personal computer using URC's Complete Control Program (CCP) software. This software allows for extensive customization and integration with various home entertainment systems.
Important Note: URC typically requires programming of this device to be performed by a certified professional installer. Direct programming instructions or software access for end-users are generally not provided by the manufacturer. It is highly recommended to consult with a professional installer for initial setup and any subsequent programming adjustments to ensure optimal performance and compatibility with your devices.
The remote features 32 MB of flash memory for storing complex configurations and commands.
4. Operating Instructions
Once programmed, the URC MX-780 provides intuitive control over your configured devices. The remote's 1.5-inch color OLED display will show relevant information, such as device names, activities, and command feedback.
4.1 Basic Control Functions
- Power Buttons: Use the dedicated power buttons to turn devices on or off.
- Volume/Channel Control: Utilize the volume (VOL) and channel (CH) buttons for audio and channel navigation.
- Navigation Pad: The central navigation pad with a 'SEL' button is used for menu navigation and selection.
- Hard Buttons: The red, green, yellow, and blue hard buttons are typically assigned to specific functions or macros during programming.
- Activity Buttons: The remote can be programmed with "Listen" and "Watch" activities, which can execute a series of commands to prepare your system for a specific task (e.g., turning on TV, receiver, and Blu-ray player for watching a movie).
- Sleep Timer: The remote includes a sleep timer function, which can be configured during programming to automatically turn off devices after a set period.
For detailed operation of specific device functions or custom activities, refer to the programming configuration set by your professional installer.
5. Maintenance
5.1 Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn smudges, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as they may damage the remote's finish or screen.
5.2 Battery Replacement
When the remote's performance degrades or the display dims, it is likely time to replace the batteries. Always replace all four AA batteries at the same time with new alkaline batteries. Do not mix old and new batteries, or different types of batteries.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead batteries. | Replace all four AA batteries. |
| Remote not controlling a device. | Incorrect programming or device not selected. | Ensure the correct device is selected on the remote. If the issue persists, the remote may require reprogramming by a professional installer. |
| OLED display is dim or blank. | Low batteries or display settings. | Replace batteries. If the issue continues, consult your professional installer as display settings are part of the programming. |
| Difficulty programming the remote. | This remote is designed for professional programming. | Contact a certified URC professional installer for programming assistance. URC does not typically provide end-user programming instructions for this model. |
If you encounter issues not listed here, or if the suggested solutions do not resolve the problem, please contact your professional URC installer or URC customer support for further assistance.
7. Specifications
- Model: MX-780
- Brand: URC (Universal Remote Control)
- Product Dimensions: 8.7 x 2.2 x 1.3 inches
- Item Weight: 8.2 ounces
- Power Source: 4 AA alkaline batteries (required)
- Display: 1.5-inch Color OLED
- RF Frequency: 418 MHz Narrow Band RF
- Memory: 32 MB Flash Memory
- Max Number of Supported Devices: Up to 40
- Programming: PC programming via CCP software (professional installation recommended)
- Special Features: IR/RF One-Way, Sleep Timer, Hard Buttons (Red, Green, Yellow, Blue)
- Date First Available: November 8, 2013
8. Warranty and Support
For warranty information, please refer to the warranty card included with your URC MX-780 remote control or visit the official URC website. As this product is primarily designed for professional integration, support and service are typically provided through your authorized URC dealer or installer.
For technical assistance or to locate a professional installer, please visit the URC Automation official website or contact their customer service department directly.
